Instruction/ maintenance manual of the product PowerBrite Pro7 Samson
Go to page of 16
® O WNERS MANU AL 1.5 3.0 4.5 6.0 7.5 9.0 10.5 12.0 13.5 15.0 85 95 105 110 115 117 120 124 127 130 LIGHT OUTLETS UNSWITCHED 15 AMPERES SAMSON PowerBrite Pro7 AMMETER VOLTMETER PUSH PUSH SAMSON OUTLE.
Produced by On The Right Wavelength for Samson Technologies Corp. Copyright 1997, 1998, Samson Technologies Corp. Printed March, 1998 Samson Technologies Corp.
Introduction Congratulations on purchasing your Samson PowerStrip, PowerBrite, or PowerBrite Pro! This manual covers three products: the PowerStrip PS9; the PowerBrite PB9; and the PowerBrite Pro7.
Sy stem Features The Samson PowerStrip PS9, PowerBrite PB9, and PowerBrite Pro7 all utilize state-of-the-art technology in power distribution and are engineered to the finest detail.
Guided T our - P ow erStrip PS9 F ront P anel 1: Outlets switch - Use this to turn the rear-panel outlets on or off. When on, the status light inside this switch is lit red. 2: Unswitched convenience outlet - This 3-pin AC outlet is active whenever the PS9 is plugged in, regardless of the setting of the Outlets switch (see #1 above).
Guided T our - P ow erStrip PS9 Rear P anel 1: Switched AC outlets (horizontal mount) - Connect external equipment to these standard 3-pin AC outlets, which are turned on and off from the front panel Outlets switch (see #2 on the previous page).
5 Guided T our - P ow erBrite PB9 F ront P anel 1: Light switch - Use this to turn the fluorescent light in the slide-out drawer on or off. When on, the LED inside this switch lights red. 2: Outlets switch - Use this to turn the rear-panel outlets on or off.
6 Guided T our - P ow erBrite PB9 Rear P anel 1: Switched AC outlets (horizontal mount) - Connect external equipment to these standard 3-pin AC outlets, which are turned on and off from the front panel Outlets switch (see #2 on the previous page).
Guided T our - P ow erBrite Pro7 F ront P anel 1: Light switch - Use this to turn the fluorescent light in the slide-out drawer on or off. When on, the status light inside this switch is lit red. 2: Outlets switch - Use this to turn the rear-panel outlets on or off.
Guided T our - P ow erBrite Pro7 Rear P anel 1: Lamp switch - Used to turn on or off a connected Littlite ® - compatible lamp (see #2 below). 2: Lamp connector - If required, you can connect a Littlite ® - compatible lamp to this 12 VDC female XLR jack.
9 Setting Up and Using Y our P ow erStrip or P ow erBrite Setting up your PS9, PB9, or Pro7 is a simple procedure which takes only a few minutes: 1. Remove all packing materials (save them in case of need for future service) and install the unit in a standard 19" rack.
10 Changing the P ow erBrite Bulb The 4-watt fluorescent bulb in your PowerBrite PB9 and Pro7 is rated to deliver approximately 3,000 hours of operation. That ’ s a long time, to be sure, but there will probably come a time when you ’ ll need to replace it.
11 Specifications Electrical: Number of Outlets PS9 and PB9 8 switched, 1 unswitched Pro7 6 switched, 1 unswitched Max. Current 15 Amp (circuit breaker protected) Input Voltage (RMS) 0 to 130 Vac continuous Spike Protection Mode Hot to Neutral, Hot to Ground, and Neutral to Ground Max.
Appendix A: Fluorescent Or Incandescent? There are numerous advantages to using the kind of fluorescent lighting provided by the PowerBrite PB9 and PowerBrite Pro7 over the incandescent lighting provided by competing rack light products.
LIGHT OUTLETS UNSWITCHED 15 AMPERES SAMSON 15 Po werBrite ™ PB9 A M P PUSH PUSH Thank you for pur chasing the SAMSON P owerBrite ™ Get Y our Nameplate Customized! Illuminate any image that will fit within the available space—4 1/8 wide x 3⁄4 high.
Changing the P ow erBrite Nameplate After you have received your new Custom Nameplate film, it ’ s a simple matter to install it. Begin by unplugging your PowerBrite and then unplug all devices connected to the rear and/or front panel outlets.
An important point after buying a device Samson PowerBrite Pro7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samson PowerBrite Pro7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samson PowerBrite Pro7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samson PowerBrite Pro7 you will learn all the available features of the product, as well as information on its operation. The information that you get Samson PowerBrite Pro7 will certainly help you make a decision on the purchase.
If you already are a holder of Samson PowerBrite Pro7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samson PowerBrite Pro7.
However, one of the most important roles played by the user manual is to help in solving problems with Samson PowerBrite Pro7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samson PowerBrite Pro7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
