Instruction/ maintenance manual of the product Hartke Acoustic Pre-Amp Samson
Go to page of 12
ACOUSTIC PRE-AMP/DI.
‑‑ Copyright 2004 -2008, Samson T echnologies Corp. Printed June, 2008 v1.1 Har tke 45 Gilpin Av enue Hauppauge, New Y ork 11788‑8816 Phone: 1‑800‑3‑SAMSON (1‑800‑372‑6766) F ax: 631‑784‑2201 ww w .
T able Of Contents Acoustic A ttack Introduction And Featur es 2 Introduction 2 Acoustic A ttack Featur es 2 Acoustic A ttack Fron t Panel Lay out 3 Acoustic A ttack Side Panel Lay out 4 Operating The.
Ac oustic Attack Intr oduction and Featur es Introduction Congratulations on your purchase of the Acoustic Attack acoustic pre ‑amp/ direct box by Har tke! The Acoustic Attack is a high qualit y preamplifier designed specifically for acoustic instruments.
Ac oustic Attack F ront Panel La yout 1 OUTPUT - Control knob used to adjust the overall Output volume. 2 BASS - Control k nob used to boost or cut the low frequencies. 3 MID – Used to boost or cut the midrange frequencies. 4 TREBLE - Control knob used to boost or cut the high frequencies.
! " # $ % & ' A Power Inlet – Pow er inlet for connec t- ing the optional AD006 9 V olt p ower adapter . B PHANTOM ON / GROUND LIFT switch - Used to switch between phantom power or batter y operation, and/or Ground Lif t/ Connect.
5 Operating the A coustic A ttack Setting Up the Acoustic A ttack The basic procedure for setting up and using your Acoustic Attack is simple and takes only a few minutes.
Po wer the Acoustic Attack - continued Installing the Battery Install a standard 9‑volt battery by removing the batter y door and attaching the battery to the terminal connector . Fit the battery into the compar tment and reinstall the battery door .
7 Operating the Ac oustic Attack Using the MID control to Reduce Feedback A good use of the MID control is to help reduce feedback. T o do this, tur n the MID control all the way down, (fully counter .
8 Acoustic A ttack T ypical S et-ups There are many different ways to use the Acoustic Attack, however , the basic connection is the same in most installations and applications.
Ac oustic Attack Sy stem D iagrams Using an External Effects Processor f or Recording In a recording application, you can use the Acoustic Attack’ s Direct Input as a second input, with the OUTPUT to create an effects loop.
Hartke 45 Gilpin Av enue Hauppauge, New Y ork 11788‑8816 Phone: 1‑800‑3‑SAMSON (1‑800‑372‑6766) F ax: 631‑784‑2201 www.hartke.com.
An important point after buying a device Samson Hartke Acoustic Pre-Amp (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samson Hartke Acoustic Pre-Amp yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samson Hartke Acoustic Pre-Amp - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samson Hartke Acoustic Pre-Amp you will learn all the available features of the product, as well as information on its operation. The information that you get Samson Hartke Acoustic Pre-Amp will certainly help you make a decision on the purchase.
If you already are a holder of Samson Hartke Acoustic Pre-Amp, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samson Hartke Acoustic Pre-Amp.
However, one of the most important roles played by the user manual is to help in solving problems with Samson Hartke Acoustic Pre-Amp. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samson Hartke Acoustic Pre-Amp along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
