Instruction/ maintenance manual of the product SD8PC3D Salton
Go to page of 8
Hot Air Popcorn Popper USE & CARE GUIDE MODEL SD8PC3D SD8PC3D Final.qxd 8/18/2003 10:02 AM Page 1.
1 IMPOR T ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING . 2. Do not touch hot surfaces. Use handles or knobs. Use oven mitts or potholders.
ADDITIONAL IMPORT ANT SAFEGUARDS CAUTION HOT SURF ACES: This appliance generates heat and escaping steam during use. Proper precautions must be taken to prevent the risk of burns, fires or other damage to persons or property . CAUTION: This appliance is hot during operation and retains heat for some time after turning off.
OPERA TING INSTRUCTIONS PRODUCT MA Y V ARY SLIGHTL Y FROM ILLUSTRA TIONS 3 Chute Cover (P/N 22378) Popcorn Serving Bowl (P/N 22379) Popping Chamber Base BEFORE USING Carefully unpack the Popcorn Popper and wash Cover with warm, soapy water; rinse thoroughly and dry completely .
4 T O USE 1. Remove Cover from Base. Place fresh hot air popcorn kernels into the Popping Chamber up to the MAX Fill Line. NEVER FILL WITH KERNELS P AST THIS LINE. Do not add any other ingredients such as: oil, shortening, butter , margarine, salt or sugar , as damage will occur .
ADDITIONAL BA TCHES For additional batches unplug unit. Make sure the Popping Chamber is empty . Carefully remove excess popcorn or left over unpopped kernels. Then repeat steps 1 through 4. Note: When popping more than two or three batches of corn, allow popper to cool down for at least 10 minutes.
6 RECIPES Scooby’ s Cinnamon Popcorn 3 quarts popcorn 1-1/2 teaspoons cinnamon 1/4 cup melted butter Mix spice together with the melted butter and pour over the popcorn. T oss gently until the popcorn is evenly coated with the cinnamon. Add salt to taste.
LIMITED ONE YEAR W ARRANTY W arranty: This product is warranted by Salton, Inc. to be free from defects in materials or workmanship for a period of (1) year from the original purchase date. This product warranty covers only the original consumer purchaser of the product.
An important point after buying a device Salton SD8PC3D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Salton SD8PC3D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Salton SD8PC3D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Salton SD8PC3D you will learn all the available features of the product, as well as information on its operation. The information that you get Salton SD8PC3D will certainly help you make a decision on the purchase.
If you already are a holder of Salton SD8PC3D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Salton SD8PC3D.
However, one of the most important roles played by the user manual is to help in solving problems with Salton SD8PC3D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Salton SD8PC3D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
