Instruction/ maintenance manual of the product PRESTIGE APS-20LAD Audiovox
Go to page of 16
Model APS-20LAD Installation Manual Vehicle Alarm System With Channel 2 Auxiliary Output Installation Instructions This Unit Is Intended For Installation In Vehicles With 12 Volt Negative Ground Elect.
The APS-20LAD Vehicle Alarm System is designed to provide a basic deterrent to vehicle theft, and a convenient electronic means to gain access to the vehicle by providing RF remote control over the vehicle's power door lock system.
3 128-5560A 3 of 8 extended when the hood or trunk is opened. For direct mounting, a 1/4 inch hole must be drilled. Carefully check behind the chosen location to insure the drill will not penetrate any existing factory wiring or fluid lines.
4 128-5560A 4 of 8 hatch is opened, and vice-versa. If only the hood, or only the trunk/hatch is connected to the Dark Green wire, no diode is needed. Note: The diodes which may be required for certain types of installations are the common 1N4000 series type.
5 128-5560A 5 of 8 providing a ground pulse during the disarming sequence. Connect the Red wire to the low current ground factory door "Lock" signal wire leading from the factory switch to the factory door lock relay.
6 128-5560A 6 of 8 connector, it will only plug in one way. Note: Please refer to the section; "Programming System Features" shown later in this installation guide to learn the operation of the valet/program/manual override switch.
7 128-5560A 7 of 8 to produce 2 Chirps. This signifies that you have changed the programming to Chirps OFF. Please follow the programming procedure carefully, and refer to the list of the Programmable Features above when programming the APS-20LAD.
128-5560A 8 of 8 © 2003 Audiovox Corp., Hauppauge, NY 1 1788 128-5560A.
Sistema de alarma para vehículo con salida auxiliar por canal 2 Instrucciones de instalación Esta unidad se puede instalar en vehículos con sistemas eléctricos con conexión a tierra negativa de 1.
El sistema de alarma para vehículos APS-20LAD está destinado a brindar un elemento de disuasión contra robo de vehículos y un medio electrónico conveniente de tener acceso al vehículo mediante un control remoto de RF para el sistema eléctrico de trabado de las puertas del vehículo.
diferente en el arnés. Cada uno de estos portafusibles sostiene un fusible ATC, uno de 5A y otro de 15A. Este cable ROJO debe ser conectado a un cable de energía constante del arnés o de la caja de fusibles del interruptor de encendido del vehículo.
Cable NEGRO: Sistema principal de conexión a tierra Este es uno de los cables más importantes de la instalación del sistema APS-20LAD. Debe conectarse correctamente a una parte sólida del chasis para asegurar el funcionamiento seguro del sistema.
CIRCUITOS DE CONTROL DE TRABADO DE PUERTAS DE INVERSIÓN DE POLARIDAD DE 4 CABLES y ALTERNADO DE 5 CABLES: En estas aplicaciones, se debe usar la interfaz de trabado de puertas AS-9159 (o relés para automóviles de 30 A equivalentes).
Funciones programables: Funciones 1 chirrido 2 chirridos Valor por defecto Primera Activación pasiva Activación activa Activación pasiva Segunda Encendido D/L “on” Encendido D/L “off” Encen.
7 128-5560A 7 of 8 Para programar estas funciones: La entrada al Modo de programación involucra el uso del interruptor o llave de contacto y el interruptor valet / programación / captura manual en u.
128-5560A 8 of 8 © 2003 Audiovox Corp., Hauppauge, NY 1 1788 128-5560A.
An important point after buying a device Audiovox PRESTIGE APS-20LAD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PRESTIGE APS-20LAD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PRESTIGE APS-20LAD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PRESTIGE APS-20LAD you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PRESTIGE APS-20LAD will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PRESTIGE APS-20LAD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PRESTIGE APS-20LAD.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PRESTIGE APS-20LAD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PRESTIGE APS-20LAD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
