Instruction/ maintenance manual of the product Prestige 128-8613 Audiovox
Go to page of 12
128-8613 1 of 12 Page 1 Model APS-620N Inst allation Manual This Remote St art System is designed to be used with Automatic T ransmission- Fuel Injection V ehicles Only! COMPONENTS: Control Module 2 Four Button RF T ransmitters Antenna/Receiver 1 1” X 1.
128-8613 2 of 12 Page 2 INST ALLA TION OF THE MAJOR COMPONENTS: CONTROL MODULE: Select a mounting location inside the passenger compartment (up behind the dashboard). The mounting location selected must be within 24" of the ignition switch wiring harness to allow connection of the 6 pin main wiring harness.
128-8613 3 of 12 Page 3 the remote start unit. If the vehicle is being worked on, this hood switch prevents the remote start activation even if the RF command to start is issued. This switch must be installed in all applications. Failure to do so may result in personal injury or property damage.
128-8613 4 of 12 Page 4 YELLOW W ire: S tarter Output Careful consideration for the connection of this wire must be made to prevent the vehicle from st arting while in gear .
128-8613 5 of 12 Page 5 3 Wire Ground Switched Door Lock Circuits: In this application, the Red wire of the 2 pin harness provides a ground pulse during the arming sequence, or pulsed ground lock output. Connect the Red wire to the low current ground signal wire from the factory door lock switch to the factory door lock relay .
128-8613 6 of 12 Page 6 Wiring The 4 Pin Auxiliary Output Harness, Connector “A” The auxiliary 4 pin connector provides low current outputs to control various functions in the vehicle during different stages of the Remote S tart unit's operation.
128-8613 7 of 12 Page 7 2 Pin V alet/Program/Override Push-Button Switch, Connector “D” The Black & Grey twin lead wires loaded in the two pin blue connector are the ground supply and program/valet/override input of the Remote S tart unit.
128-8613 8 of 12 Page 8 3 Pin Antenna/Receiver , Connector “F” Route the 3 pin connector from the previously installed antenna receiver assemble to the mating connector on the control module. This connector supplies 5 volts, ground and RF data from the antenna receiver to the remote start module.
128-8613 9 of 12 Page 9 T o test this circuit, while the vehicle is running under control of the remote start unit, open the vehicle’s hood. The remote start unit should shut down immediately . If not, check the wiring to the control module and the under hood pin switch.
128-8613 10 of 12 Page 10 The Light Blue wire can be used to accommodate the following situations: A. Shock Sensor By Pass: B. Additional Ignition Output: C. GM V A TS Key Override: Green w/ White trace Wire: Entry Illumination Ground Output This wire provides a 30 second ground output (300 mA Max.
128-8613 11 of 12 Page 11 Setting Up The System Programming Features: Bank 1 Transmitter Channels S tart with the system disarmed, turn the ignition switch to the on position then: 1) Press and release the push button valet/program switch 3 times.
128-8613 12 of 12 Page 12 4 PIN IN VEHICLE DA T A BUS PORT (DBI Port) The 4 pin port located on the side of this module is for proprietary Audiovox data bus interface modules.
An important point after buying a device Audiovox Prestige 128-8613 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox Prestige 128-8613 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox Prestige 128-8613 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox Prestige 128-8613 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox Prestige 128-8613 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox Prestige 128-8613, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox Prestige 128-8613.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox Prestige 128-8613. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox Prestige 128-8613 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
