Instruction/ maintenance manual of the product Air Cleaner S&S Cycle
Go to page of 8
1 Installation Instructions for S&S Air Cleaner for Stock Tillotson, Bendix, and Keihin Carbur etors on all OHV H-D's, 1994-up Buells and All 2000-up Single Runner Fuel Injected Models W ARNINGS ● Gasoline is highly flammable, explosive under certain conditions, and the fumes toxic when inhaled.
NOTES ● Air cleaner assembly must be firmly supported. S&S includes support brackets only with kits for OEM carb or single runner fuel injection. Brackets for other applications are listed in the S&S catalog and may be purchased separately .
INST ALLA TION KIT# 17-0108 1984-1989 Big T wins and 1986-1987 Sportsters (Crankcase vented only .) (See line drawing on page 6.) 1. Remove existing air cleaner assembly and related hardware, if applicable. Refer to authorized Harley-Davidson Service Manual as needed.
4 6. Insert 1 ⁄ 4 -28 bolt through backing plate from filter side. On Big T wins only- position the .200” thick spacer between the backplate and support bracket . Next install the bracket, flat washer and the Nyloc nut. Repeat with the other mounting bracket.
5 INST ALLA TION KIT# 17-0105 (See line drawing on page 7.) 1. Remove existing air cleaner assembly and related hardware including cylinder head breather fittings if applicable. Refer to authorized Harley-Davidson Service Manual as needed. NOTE - Hose barb on rear cylinder head breather fitting must be removed.
6 1966-1984 Shovel Big T win and 1957-85 Sportster with stock carburetor .............................................. Part #17-0199 1984-89 Big T win, 1986-87 Sportster with stock carburetor .
7 4 1 2 5 20 6a 19 17 34 39 40 41 45 42 43 13 44 3 20 23 1993-up Big T win and 1991-up Sportster with stock carburetor ............................................ Part #17-0100 1994-up Buell with stock carburetor .....................................
8 1. Air cleaner cover ................................... Part #17-0078 2. Element ................................................. Part #17-0079 3. Backplate 1966-’89 Big T win, 1966-’87 Sportsters .. . Part #17-0180 1993-up Big T win .........
An important point after buying a device S&S Cycle Air Cleaner (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought S&S Cycle Air Cleaner yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data S&S Cycle Air Cleaner - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, S&S Cycle Air Cleaner you will learn all the available features of the product, as well as information on its operation. The information that you get S&S Cycle Air Cleaner will certainly help you make a decision on the purchase.
If you already are a holder of S&S Cycle Air Cleaner, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime S&S Cycle Air Cleaner.
However, one of the most important roles played by the user manual is to help in solving problems with S&S Cycle Air Cleaner. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device S&S Cycle Air Cleaner along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
