Instruction/ maintenance manual of the product SS180 Ryobi
Go to page of 16
THANK YOU FOR BUYING A RYOBI SPEED SA W . Y our new Speed Saw has been engineered and manufactured to Ryobi's high standard for dependability , ease of operation, and operator safety . Properly cared for , it will give you years of rugged, trouble-free performance.
2 INTRODUCTION ■ Introduction ........................................................................................................................................................ 2 ■ General Safety Rules .......................................
3 GENERAL SAFETY RULES W ARNING: Read and understand all instructions. Failure to follow all instructions listed below , may result in electric shock, fire and/or serious personal injury . SAVE THESE INSTRUCTIONS WORK AREA ■ Keep your work area clean and well lit.
4 SPECIFIC SAFETY RULES Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
5 SPECIFIC SAFETY RULES W ARNING: A damaged battery is subject to explosion. To avoid serious personal injury, properly dispose of a damaged battery. CHARGER SAFETY INSTRUCTIONS ■ Save these instructions. This manual contains important safety and operating instructions for charger.
6 Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. The purpose of safety symbols is to attract your attention to possible dangers.
7 SPECIFICA TIONS UNP ACKING INSTRUCTIONS Your Speed Saw has been shipped completely assembled. ■ Carefully remove the Speed Saw and accessories from the box. Make sure that all items listed in the packing list are included. ■ Inspect the Speed Saw carefully to make sure no breakage or damage has occurred during shipping.
8 SWITCH Your Speed Saw has a conveniently located slide switch . SPINDLE LOCK A spindle lock secures the spindle and allows you to easily loosen the collet nut and change bits.
9 ADJUSTMENTS W ARNING: Y our Speed Saw should never be connected to power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when not in use. Disconnecting your Speed Saw will prevent accidental starting that could cause serious injury .
10 ADJUSTMENTS REMOVING DEPTH ADJUSTMENT RING See Figure 4. Follow these directions when removing the depth adjustment ring. ■ Place wrench in tab on depth adjustment ring. ■ Depress spring-loaded tab. ■ Lift depth adjustment ring off of tool. ASSEMBLING CIRCLE CUTTER See Figure 5.
11 INSTALLING BATTERY PACK See Figure 7. Follow these directions when installing the battery pack. ■ Place battery pack on the Speed Saw . ■ Align raised rib on battery pack with groove in saw's battery port.
12 OPERA TION USING CIRCLE CUTTER See Figure 10. Follow these directions when using the circle cutter. ■ Assemble circle cutter if necessary. Refer to “AS- SEMBLING CIRCLE CUTTER” earlier in this manual. ■ Attach circle cutter to Speed Saw if necessary.
13 W ARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
14 MAINTENANCE CHARGING BATTERIES See Figures 11 and 12. The battery pack for this tool has been shipped in a low charge condition to prevent possible problems. Therefore, you should charge it prior to use. NOTE: Batteries will not reach full charge the first time they are charged.
15 NOTES.
OPERA T OR'S MANUAL SPEED SA W™ SS180 R YOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207 Anderson, SC 29622 www .
An important point after buying a device Ryobi SS180 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi SS180 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi SS180 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi SS180 you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi SS180 will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi SS180, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi SS180.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi SS180. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi SS180 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
