Instruction/ maintenance manual of the product SA1802 Ryobi
Go to page of 20
OPERA T OR'S MANU AL CORDLESS DRILL-DRIVER MODEL NOS. SA1202 / SA14402 / SA1802 This new drill has been engineered and manufactured to our Ryobi’s high standard for dependability, ease of operation, and operator safety. When properly cared for, the drill will give you years of rugged, trouble-free performance.
Page 2 ■ ■ ■ ■ ■ Introduction .................................................................................................................................................................... 2 ■ ■ ■ ■ ■ General Saf ety Rules ..
Page 3 GENERAL SAFETY R ULES W ARNING: Read and understand all instructions. F ailure to f ollow all instructions listed below , may result in elec- tric shock, fire and/or serious personal injur y . SA VE THESE INSTR UCTIONS WORK AREA ■ Keep y our w ork area c lean and well lit .
Page 4 GENERAL SAFETY R ULES SPECIFIC SAFETY R ULES SER VICE ■ T ool service must be performed only b y qualified repair personnel. Ser vice or maintenance performed by unqualified personnel ma y result in a r isk of injury . ■ When servicing a tool, use onl y identical replace- ment parts.
Page 5 IMPOR T ANT SAFETY INSTRUCTIONS FOR CHARGER W ARNING: Read and understand all instructions. F ailure to f ollow all instructions listed below , may result in elec- tric shock, fire and/or serious personal injur y . ■ Never use a battery that has been dropped or received a sharp blow.
Page 6 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger.
Page 7 INSTRUCTIONS When unpacking the tool: ■ Carefully remov e the tool and accessor ies from the box. ■ Make sure that all items listed in the pac king list are in- cluded. ■ Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
Page 8 KNOW YOUR DRILL-DRIVER See Figure 1. Before using this tool, familiarize yourself with all operating features and safety requirements. However, do not let familiarity with the tool make you careless. This new drill-driver is equipped with the following features.
Page 9 24 20 5 FEA TURES Fig. 1 KEYLESS CHUCK BIT ST ORAGE AREA TORQUE ADJUSTMENT RING SWITCH TRIGGER LEVEL BA TTER Y P ACK DIRECTION OF ROT A TION SELECT OR TWO SPEED GEAR TRAIN (HI-LO) MAG TRA Y ™.
Page 10 REVERSIBLE See Figure 2. This tool is reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling.
Page 11 ADJUSTMENTS INSTALLING BITS See Figures 4 and 5. ■ Place the direction of rotation selector in center position. This will lock the switch trigger in the off position. See Figure 10. ■ Open or close the chuck jaws to a point where the opening is slightly larger than the bit size you intend to use.
Page 12 24 20 5 24 20 5 ADJUSTMENTS ADJUSTABLE TORQUE CLUTCH See Figure 6. When using your drill-driver f or va rious driving applications, it becomes necessar y to increase or decrease the torque in order to help prev ent the possibility of damaging screw heads, threads, w orkpiece, etc.
Page 13 OPERA TION Fig. 8 W ARNING: Do not allow f amiliarity with the dr ill-driver to mak e you careless . Remember that a careless fraction of a second can result in a serious personal injur y .
Page 14 24 20 5 IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES When using your drill-driver continuously, the batteries in your battery pack become hot. You should let a hot battery pack cool down for approximately 30 minutes before at- tempting to recharge.
Page 15 OPERA TION W ARNING: Always wear safety goggles or safety glasses with side shields when operating tool. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. DRILLING See Figure 12. When drilling hard, smooth surfaces, use a center punch to mark the desired hole location.
Page 16 OPERA TION LEVEL DRILLING See Figures 12 and 13. A conv enient new feature pro vided with your drill is a lev el. It is recessed in the motor housing on top of your drill. It can be used to keep drill bit le v el dur ing drilling operations. W ARNING: Do not force tool.
Page 17 MAINTENANCE Fig. 16 Fig. 15 Fig. 17 24 20 5 24 20 5 24 20 5 MALLET CHUCK JA WS KEYLESS CHUCK HEX KEY WRENCH W ARNING: When ser vicing use only identical Ry obi replacement par ts. Use of any other par ts ma y create a hazard or cause product damage.
Page 18 R E C Y C L E 1 . 8 0 0 . 8 2 2 . 8 8 3 7 RBRC Ni Cd ™ MAINTENANCE To obtain the longest possible battery life, we suggest the following: ■ Store and charge your batteries in a cool area. Temperatures below 50°F or above 100°F will shorten battery life.
Page 19 NO TES.
983000-334 6-03 • SER VICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center.
An important point after buying a device Ryobi SA1802 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi SA1802 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi SA1802 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi SA1802 you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi SA1802 will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi SA1802, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi SA1802.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi SA1802. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi SA1802 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
