Instruction/ maintenance manual of the product SA120 Ryobi
Go to page of 20
OPERA T OR’S MANU AL CORDLESS DRILL-DRIVER MODEL NOS. SA960 / SA120 MODEL SA120 MODEL SA960 This new drill has been engineered and manufactured to our Ryobi’s high standard for dependability, ease of operation, and operator safety. When properly cared for, the drill will give you years of rugged, trouble-free performance.
Page 2 ■ ■ ■ ■ ■ Introduction .................................................................................................................................................................... 2 ■ ■ ■ ■ ■ General Saf ety Rules ..
Page 3 GENERAL SAFETY R ULES W ARNING: Read and understand all instructions. F ailure to f ollow all instructions listed below , may result in elec- tric shock, fire and/or serious personal injur y . SA VE THESE INSTR UCTIONS WORK AREA ■ K eep your w ork area clean and well lit .
Page 4 GENERAL SAFETY R ULES SPECIFIC SAFETY R ULES SER VICE ■ T ool service must be performed onl y by qualified repair personnel. Ser vice or maintenance performed b y unqualified personnel may result in a risk of injur y . ■ When servicing a tool, use only identical replace- ment parts.
Page 5 IMPOR T ANT SAFETY INSTR UCTIONS FOR CHARGER W ARNING: Read and understand all instructions. F ailure to f ollow all instructions listed below , may result in elec- tric shock, fire and/or serious personal injur y . ■ Never use a battery that has been dropped or received a sharp blow.
Page 6 The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger.
Page 7 INSTR UCTIONS When unpacking the tool: ■ Carefully remov e the tool and accessor ies from the bo x. ■ Make sure that all items listed in the pac king list are in- cluded. ■ Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
Page 8 KNO W Y OUR DRILL-DRIVER See Figure 1. Before using this tool, f amiliarize yourself with all operating f eatures and safety requirements . Howe ver , do not let f amiliarity with the tool make you careless . W ARNING: Exercise caution when using this tool.
Page 9 20 20 FEA TURES Fig. 1 KEYLESS CHUCK BIT STORAGE AREA TORQUE ADJUSTMENT RING SWITCH TRIGGER LEVEL MODEL SA960 MODEL SA120 KEYLESS CHUCK BIT STORAGE AREA TORQUE ADJUSTMENT RING SWITCH TRIGGER LE.
Page 10 5 1 0 REVERSIBLE See Figure 2. This tool has the f eature of being rev ersible . The direction of rotation is controlled by a selector located abo v e the s witch trigger . With the dr ill held in normal operating position, the direction of rotation selector should be positioned to the left of the s witch for drilling.
Page 11 INSTALLING BITS See Figures 4 and 5. ■ Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 9. ■ Open or close chuck jaws to a point where the opening is slightly larger than the bit size you intend to use.
Page 12 20 20 ADJUSTABLE TORQUE CLUTCH See Figure 6. When using your drill-driver f or various driving applications, it becomes necessary to increase or decrease the torque in order to help pre v ent the possibility of damaging screw heads , threads , workpiece, etc.
Page 13 OPERA TION Fig. 8 W ARNING: Do not allow f amiliarity with the dr ill-driver to mak e you careless . Remember that a careless fraction of a second is sufficient to inflict sev ere injur y . CHARGING YOUR DRILL-DRIVER The battery pack for this tool has been shipped in a low charge condition to prevent possible problems.
Page 14 20 5 1 0 OPERA TION Fig. 10 Fig. 9 IMPORTANT INFORMATION FOR RECHARG- ING HOT BATTERIES When using your drill-driver continuously, the batteries be- come hot. You should let the batteries cool down for approxi- mately 30 minutes before attempting to recharge.
Page 15 OPERA TION VARIABLE SPEED See Figure 9. Your drill has a variable speed feature in the switch. The switch delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression. W ARNING: Alwa ys wear saf ety goggles or safety glasses with side shields when operating tool.
Page 16 20 MAG TRA Y ™ (SCREW HOLDER) Fig. 13 MODEL SA120 OPERA TION LEVEL DRILLING See Figure 12. A con venient ne w feature provided with y our dr ill is a lev el. It is recessed in the motor housing on top of your drill. It can be used to keep drill bit le vel during drilling operations.
Page 17 MAINTENANCE W ARNING: When ser vicing use only identical Ry obi replacement par ts. Use of any other par ts ma y create a hazard or cause product damage.
Page 18 R E C Y C L E 1 . 8 0 0 . 8 2 2 . 8 8 3 7 RBRC Ni Cd ™ MAINTENANCE To obtain the longest possible battery life, we suggest the following: ■ Store and charge your batteries in a cool area. Temperatures below 50°F or above 100°F will shorten battery life.
Page 19 NO TES.
OPERA T OR’S MANU AL CORDLESS DRILL-DRIVER MODEL NOS. SA960 / SA120 983000-333 6-03 • SER VICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center.
An important point after buying a device Ryobi SA120 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi SA120 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi SA120 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi SA120 you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi SA120 will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi SA120, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi SA120.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi SA120. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi SA120 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
