Instruction/ maintenance manual of the product OSS500 Ryobi
Go to page of 16
Y our new oscillating spindle sander has been engineered and manufactured to Ryobi's high standard for dependability , ease of operation, and operator safety . Properly cared for , it will give you years of rugged, trouble-free performance. W ARNING: To reduce the risk of injury , the user must read and understand the operator ’s manual.
2 INTRODUCTION ■ Introduction ........................................................................................................................................................ 2 ■ Rules for Safe Operation ...................................
3 RULES FOR SAFE OPERA TION Safe operation of this power tool requires that you read and understand this operator's manual and all labels affixed to the tool. Safety is a combination of common sense, staying alert, and knowing how your tool works.
4 RULES FOR SAFE OPERA TION ■ DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by a qualified service technician at an authorized service center. ■ KEEP TOOL DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning.
5 RULES FOR SAFE OPERA TION The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger.
6 SPECIFICA TIONS Oscillating Range 5/8 in. (15.9 mm) Oscillations Per Minute 58 OPM Spindle Size 1/2 in. (12.7 mm) No Load Speed 2000 RPM Input 120 Volts, 60 Hz, AC only, 3.5 Amps Weight 49 lbs. (22.2 kg) UNP ACKING INFORMATION We have shipped the oscillating spindle sander completely assembled and ready to use with a 1 in.
7 Before using the oscillating spindle sander, familiarize yourself with all operating features and safety requirements. However, do not let familiarity with the tool make you careless. W ARNING: Exercise caution when using the oscillating spindle sander.
8 FEA TURES Fig. 1 W ARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
9 ADJUSTMENTS W ARNING: The sander should never be connected to a power supply when you are assembling parts, making ad- justments, cleaning, or when not in use. Disconnect- ing the tool will prevent accidental starting that could cause serious personal injury.
10 ADJUSTMENTS REMOVING SANDING SLEEVES See Figure 3. Follow these directions to remove sanding sleeves. ■ Unplug the sander. W ARNING: Failure to unplug the tool could result in accidental starting causing serious injury. ■ Grasp and hold the sanding sleeve on the spindle.
11 ADJUSTMENTS Fig. 5 THROAT PLATE HEX NUT UPPER SPINDLE WASHER SANDING SLEEVE SPINDLE WRENCH LOWER SPINDLE WASHER INSTALLING 1/2 INCH (12.7 mm) SANDING SLEEVES See Figure 5. Follow these directions to install 1/2 inch (12.7 mm) sanding sleeves. ■ Unplug the sander.
12 OPERA TION W ARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury. MOUNTING THE SANDER TO A WORK SURFACE See Figures 6 and 7.
13 OPERA TION OPERATING THE SANDER See Figures 8 and 9. Follow these directions to operate the sander. ■ Insert the switch key. ■ Turn on the sander by lifting the switch. ■ Let the motor build to its full speed. ■ Feed the workpiece gradually against the sanding sleeve from right to left.
14 W ARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
15 NOTES.
OPERA T OR'S MANUAL Oscillating Spindle Sander OSS500 - Double Insulated R YOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207 Anderson, SC 29622 www .
An important point after buying a device Ryobi OSS500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi OSS500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi OSS500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi OSS500 you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi OSS500 will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi OSS500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi OSS500.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi OSS500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi OSS500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
