Instruction/ maintenance manual of the product OJ1802 Ryobi
Go to page of 18
This new orbital jig saw has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. When properly cared for, the saw will give you years of rugged, trouble-free performance.
2 INTRODUCTION Introduction ................................................................................................................................................................ 2 General Safety Rules .
3 GENERAL SAFETY RULES W ARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in elec- tric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS WORK AREA Keep your work area clean and well lit.
4 SPECIFIC SAFETY RULES Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a "live" wire will also make exposed metal parts of the tool "live" and shock the operator.
5 IMPORT ANT SAFETY INSTRUCTIONS FOR CHARGER SA VE THESE INSTRUCTIONS W ARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in elec- tric shock, fire and/or serious personal injury. Never use a battery that has been dropped or received a sharp blow.
6 Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
7 SPECIFICA TIONS UNP ACKING INSTRUCTIONS Your Orbital Jig Saw has been shipped completely assembled. Carefully remove the tool and accessories from the box. Make sure that all items listed in the packing list are included. Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
8 W ARNING: Exercise caution when using the orbital jig saw. Care- less actions, for even a fraction of a second, can result in serious personal injury. Before using the orbital jig saw, familiarize yourself with all operating features and safety requirements.
9 FEA TURES Fig. 1 TRIGGER SWITCH BA TTERY P ACK LOCK-OFF BUTTON ORBIT AL ADJUSTMENT KNOB T OOL-LESS BLADE CLAMP BLADE STORAGE AREA SA W BLADE.
10 ADJUSTMENTS W ARNING: The orbital jig saw should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will prevent accidental starting that could cause serious injury.
11 OPERA TION W ARNING: Always wear safety goggles or safety glasses with side shields when operating this tool. Failure to do so could result in dust, shavings, or loose particles being thrown into your eyes, resulting in possible serious injury.
12 OPERA TION INSTALLING THE BATTERY PACK See Figure 13. Follow these steps to install the battery pack. Lock the trigger switch by placing the rotation selector in the center position.
13 OPERA TION GENERAL CUTTING See Figure 4. Rest the front of the saw base on the workpiece and align cutting edge of the blade with the line on your workpiece. Start your saw and move it forward on the work surface. Apply downward pressure to keep the saw steady and only enough forward pressure to keep the blade cutting.
14 0 15 30 45 15 30 OPERA TION Fig. 6 Fig. 8 BASE ANGLE CUTTING (Bevel Cutting) See Figures 6 and 7. Bevel cutting angles may be adjusted from 0 ° to 45 ° right or left. Angles for cuts from 0 ° to 45 ° in 15 ° increments are marked on a scale on both the left and right side of the base.
15 OPERA TION Fig. 9 Fig. 10 BASE EDGE GUIDE SCREW SCALE BASE BASE PIVOT SCREW SPLINTER-FREE CUTTING See Figure 9. The base of your jig saw has a narrow slot to permit splinter-free cutting. It is especially useful when cutting plywood. This feature should only be used when making straight cuts or circle cuts.
16 R E C Y C L E 1 . 8 0 0 . 8 2 2 . 8 8 3 7 RBRC Ni Cd ™ MAINTENANCE W ARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage.
17 NOTES.
983000-330 3-04 R YOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207 Anderson, SC 29622 www .ryobitools.com 1-800-525-2579 CUST OMER SERVICE INFORMA TION For parts or service, contact your nearest Ryobi authorized service center.
An important point after buying a device Ryobi OJ1802 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi OJ1802 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi OJ1802 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi OJ1802 you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi OJ1802 will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi OJ1802, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi OJ1802.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi OJ1802. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi OJ1802 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
