Instruction/ maintenance manual of the product HP1201M Ryobi
Go to page of 14
THANK YOU FOR BUYING A R YOBI CORDLESS DRILL-DRIVER. Y our new cordless drill-driver has been engineered and manufactured to Ryobi’s high standard for dependability , ease of operation, and operator safety . Properly cared for , it will give you years of rugged, trouble-free performance.
Page 2 TABLE OF CONTENTS ■ T able Of Contents/T ypical Applications. ................................................................................ 2 ■ Rules For Safe Operation ....................................................................
Page 3 RULES FOR SAFE OPERA TION The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger.
Page 4 RULES FOR SAFE OPERA TION (Continued) when working outdoors. Wear protective hair covering to contain long hair and keep it from being drawn into nearby air vents. ■ ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses have only impact-resistant lenses; they are NOT safety glasses.
Page 5 RULES FOR SAFE OPERA TION (Continued) ■ To reduce risk of damage to electric plug and cord, pull by the body rather than the cord when disconnecting charger/charging assembly. ■ Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
Page 6 SPECIFICATIONS: Model HP1201M Chuck 3/8 in. Keyless Motor DC Motor 12.0V Switch Variable Speed No Load Speed 0 - 550 RPM Clutch 24 Positions Charger Input 120V, 60 Hz, AC Only Charge Rate 3-6 Hours IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES When using your drill-driver continuously, the batteries in your battery pack become hot.
Page 7 OPERA TION Fig. 1 KNOW YOUR DRILL-DRIVER See Figure 1. Before attempting to use any tool, familiarize yourself with all operating features and safety requirements. W ARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.
Page 8 2 4 6 10 8 6 2 3 10 4 8 OPERA TION Fig. 4 Fig. 3 W ARNING: If any parts are missing, do not operate tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. SWITCH See Figure 3. Your drill starts and stops by depressing and releasing the switch trigger.
Page 9 2 4 6 8 2 4 6 8 2 4 6 8 10 OPERA TION Fig. 5 Fig. 6 Note: Rotate the chuck body in the direction of the arrow marked GRIP to tighten the chuck jaws. DO NOT use a wrench to tighten or loosen the chuck jaws. W ARNING: Do not insert drill bit into chuck jaws and tighten as shown in figure 7.
Page 10 16 18 22 20 2 4 6 8 10 2 4 6 8 2 4 6 8 OPERA TION REMOVING BITS See Figure 6. ■ Place the direction of rotation selector in center position. This will turn off the power to your drill.
Page 11 OPERA TION W ARNING: Always wear safety goggles or safety glasses with side shields when operating tool. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury . DRILLING See Figure 11. When drilling hard, smooth surfaces, use a center punch to mark the desired hole location.
Page 12 2 4 6 8 10 OPERA TION Fig. 12 CHUCK REMOV AL See Figures 12, 13, and 14. ■ Lock the switch trigger by placing the direction of rotation selector in center position. ■ Insert a 5/16 inch or larger hex key wrench into the chuck of your drill and tighten the chuck jaws securely .
Page 13 MAINTENANCE W ARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts can create a hazard or cause product damage. A void using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
OPERA T OR'S MANUAL CORDLESS DRILL-DRIVER MODEL NO. HP1201M R YOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson, SC 29625 Post Office Box 1207 Anderson, SC 29622-1207 Phone 1-800-525-2579 R YOBI TECHNOLOGIES INC.
An important point after buying a device Ryobi HP1201M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi HP1201M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi HP1201M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi HP1201M you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi HP1201M will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi HP1201M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi HP1201M.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi HP1201M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi HP1201M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
