Instruction/ maintenance manual of the product D46C Ryobi
Go to page of 16
OPERA TOR’S MANUAL 3/8 in. DRILL DOUBLE INSULA TED D46C Y our drill has been engineered and manufactur ed to our high standard for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-free performance.
2 T ABLE OF CONTENTS Introduction ...................................................................................................................................................................... 2 � General Safety Rules ...............
3 GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below , may result in electric shock, fire and/or serious personal injury . SA VE THESE INSTRUCTIONS WORK AREA Ke ep y ou r w or k a re a c le an a nd we ll li t.
4 SERVICE Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual.
5 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpr etation of these symbols will allow you to operate the tool better and safer .
6 The following signal words and meanings ar e intended to explain the levels of risk associated with this product. DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury .
7 EXTENSION CORDS When using a power tool at a considerable distance from a power sour ce, be sure to use an extension cor d that has the capacity to handle the current the tool will draw . An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power .
8 FEA TURES Fig. 1 PRODUCT SPECIFICA TIONS Chuck ....................................................................... 3/8 in. Switch ............................. Variable Speed Reversible ( VSR) Clutch .............................................
9 WARNING: If any parts are damaged or missing do not operate this tool until the parts are r eplaced. Failur e to heed this warning could result in serious personal injury . WARNING: Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool.
10 DIRECTION OF ROT A TION SELECTOR (FORWARD/REVERSE) See Figure 2. The direction of bit r otation is reversible and is controlled by a selector located above the switch trigger . With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch trigger for dri llin g.
11 OPERA TION INST ALLING BITS See Figure 5 - 6. Unplug the drill. Open or close the chuck jaws to a point where the open- ing is slightly larger than the bit size you intend to use. Also, raise the front of the drill slightly to keep the bit from falling out of the chuck jaws.
12 OPERA TION TO INCREASE TORQUE Fig. 8 TO DECREASE TORQUE TORQUE ADJUSTMENT RING ADJUST ABLE TORQUE CLUTCH See Figure 8. This product is equipped with an adjustable torque clutch for driving differ ent types of screws into different materials. The proper setting depends on the type of material and the size of screw you ar e using.
13 WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust.
14 MAINTENANCE Fig. 10 Fig. 11 Fig. 12 SCREWDRIVER HEX KEY KEYLESS CHUCK MALLET CHUCK JA WS CHUCK REMOV AL See Figures 10 - 12. The chuck may be removed and r eplaced with a new one. Unplug the drill. Insert a 5/16 in. or larger hex key into the chuck of the drill and tighten the chuck jaws securely.
15 NOTES.
16 ONE WORLD TECHNOLOGIES, INC. 1428 Pearman Dairy Road, Anderson, SC 29625 Phone 1-800-525-2579 www .ryobitools.com 983000-808 01-09-05 (REV :00) • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Authorized Service Center .
An important point after buying a device Ryobi D46C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi D46C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi D46C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi D46C you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi D46C will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi D46C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi D46C.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi D46C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi D46C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
