Instruction/ maintenance manual of the product D45C Ryobi
Go to page of 14
THANK YOU FOR BUYING A RYOBI DRILL-DRIVER Y our new drill-driver has been engineered and manufactured to Ryobi's high standard for dependability , ease of operation, and operator safety . Properly cared for , it will give you years of rugged, trouble-free performance.
2 T ABLE OF CONTENTS ■ T able of Contents .............................................................................................................. ................................. 2 ■ General Safety Rules ...................................
3 GENERAL SAFETY RULES T ool Use and Care ■ Use clamps or other practical way to secure and support the workpiece to a stable platform. Hold- ing the work by hand or against your body is un- stable and may lead to loss of control. ■ Do not force tool.
4 SPECIFIC SAFETY RULES AND/OR SYMBOLS Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator .
5 SYMBOLS SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) min Minutes Time Alternating Current Type or a characteristic of current --- Direct Current Type or a characteristic of current n 0 No Load Speed Rotational speed, at no load .
6 ® 20 24 5 0 - 1 0 L F A 0 - 3 / 8 0 - 1 0 L F A 0 - 3 / 8 KNOW YOUR DRILL-DRIVER See Figure 1. Before attempting to operate your drill-driver, familiarize yourself with all operating features and safety require- ments. W ARNING: Carefully read through this entire operator's manual before using your new drill-driver .
7 ® 20 24 5 0 - 1 0 L F A 0 - 3 / 8 FEA TURES PRODUCT SPECIFICA TIONS: DRILL-DRIVER D45C Chuck Capacity 1/16 in. to 3/8 in. (1.6 mm to 10 mm) Rating 120 V , 60 Hz, AC only Input 4.5 Amperes Switch V ariable Speed No Load Speed 0-1000 RPM Clutch 24 Positions APPLICATIONS (Use only for the purpose listed below) ■ Drilling in wood.
8 OPERA TION REVERSIBLE See Figure 3. ® 20 2 4 5 0 - 1 0 L F A 0 - 3 / 8 FORW ARD SELECTOR Fig. 3 REVERSE This tool has the feature of being reversible.
9 ® 20 24 5 0 - 1 0 L F A 0 - 3 / 8 0 - 1 0 L F A 0 - 3 / 8 ® 20 24 5 0 - 1 0 L F A 0 - 3 / 8 OPERA TION W ARNING: Make sure to insert drill bit straight into chuck jaws. Do not insert drill bit into chuck jaws at an angle and then tighten, as shown in Figure 5.
10 22 20 18 2 22 ® 2 0 5 L F A OPERA TION BIT STORAGE See Figure 7. When not in use, bits provided with your drill can be placed in the storage area located on the bottom of your drill as shown in figure 7. SCREWDRIVER BITS BIT STORAGE AREA W ARNING: Always wear safety goggles or safety glasses with side shields when operating your drill.
11 OPERA TION CHUCK REMOVAL See Figure 10. Whenever necessary to remove the chuck for replacement, etc. use the following procedure: ■ Unplug your drill. W ARNING: Failure to unplug your drill could result in accidental starting causing serious injury .
12 MAINTENANCE GENERAL All parts represent an important part of the double insulation system and should be serviced only at an authorized service center. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
13 R YOBI 3/8 in. DRILL-DRIVER – MODEL NO. D45C The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your R YOBI 3/8 in. DRILL-DRIVER or when order- ing parts. SEE BACK P AGE FOR P ARTS ORDERING INSTRUCTIONS P ARTS LIST Key No.
972000-875 Printed In U.S.A. OPERA T OR'S MANUAL 3/8 i n . (10 mm) Drill-Driver Model No. D45C DOUBLE INSULA TED • SER VICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center.
An important point after buying a device Ryobi D45C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi D45C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi D45C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi D45C you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi D45C will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi D45C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi D45C.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi D45C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi D45C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
