Instruction/ maintenance manual of the product D40 Ryobi
Go to page of 14
THANK YOU FOR BUYING A R YOBI DRILL-DRIVER Y our new drill has been engineered and manufactured to Ryobi's high standard for dependability , ease of operation, and operator safety . Properly cared for , it will give you years of rugged, trouble-free performance.
2 INTRODUCTION ■ T able of Contents / Introduction ............................................................................................... .......................... 2 ■ General Safety Rules ................................................
3 GENERAL SAFETY RULES W ARNING: Read and understand all instructions. Failure to fol- low all instructions listed below , may result in elec- tric shock, fire and/or serious personal injury . SA VE THESE INSTRUCTIONS W ork Area ■ Keep your work area clean and well lit.
4 SPECIFIC SAFETY RULES Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator .
5 SA VE THESE INSTRUCTIONS SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
6 KNOW YOUR DRILL-DRIVER See Figure 1. Before attempting to operate your drill, familiarize yourself with all operating features and safety requirements. W ARNING: Carefully read through this entire operator's manual before using your new drill. Pay close attention to the Safety Rules, W arnings and Cautions.
7 FEA TURES PRODUCT SPECIFICA TIONS: DRILL-DRIVER D40 Chuck Capacity 1/16 in. to 3/8 in. (1.6 mm to 10 mm) Rating 120 V , 60 Hz, AC only Input 4.5 Amperes Switch V ariable Speed No Load Speed 0-1400 RPM APPLICATIONS (Use only for the purpose listed below) ■ Drilling in wood.
8 OPERA TION REVERSIBLE See Figure 3. FORW ARD Fig. 3 REVERSE This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger . With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling.
9 OPERA TION W ARNING: Make sure to insert drill bit straight into chuck jaws. Do not insert drill bit into chuck jaws at an angle and then tighten, as shown in Figure 5. This could cause drill bit to be thrown from drill, resulting in possible serious personal injury or damage to the chuck.
10 OPERA TION LEVEL DRILLING See Figures 6 and 7. T wo levels are recessed in the motor housing of your drill. One is located on top, while the other is located on the end. They can be used to keep drill bits level during both horizontal and vertical drilling operations.
11 MAINTENANCE GENERAL All parts represent an important part of the double insulation system and should be serviced only at an authorized service center. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
12 NOTES.
13 R YOBI 3/8 in. DRILL-DRIVER – MODEL NO. D40 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 3/8 in. DRILL-DRIVER or when ordering parts. SEE BACK P AGE FOR P ARTS ORDERING INSTRUCTIONS P ARTS LIST Key No.
983000-032 OPERA T OR'S MANUAL 3/8 i n . (10 mm) Drill-Driver Model No. D40 DOUBLE INSULA TED • SER VICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center.
An important point after buying a device Ryobi D40 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi D40 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi D40 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi D40 you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi D40 will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi D40, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi D40.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi D40. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi D40 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
