Instruction/ maintenance manual of the product CTH1442K2 Ryobi
Go to page of 14
THANK YOU FOR BUYING A R YOBI CORDLESS DRILL-DRIVER. Y our new cordless drill-driver has been engineered and manufactured to Ryobi’s high standard for dependability , ease of operation, and operator safety . Properly cared for , it will give you years of rugged, trouble-free performance.
Page 2 TABLE OF CONTENTS ■ T able Of Contents/T ypical Applications. ................................................................................ 2 ■ Rules For Safe Operation ....................................................................
Page 3 RULES FOR SAFE OPERA TION The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any danger.
Page 4 RULES FOR SAFE OPERA TION (Continued) when working outdoors. Wear protective hair covering to contain long hair and keep it from being drawn into nearby air vents. 9. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses have only impact-resistant lenses; they are NOT safety glasses.
Page 5 RULES FOR SAFE OPERA TION (Continued) 5. To reduce risk of damage to electric plug and cord, pull by the plug rather than the cord when disconnecting charger. 6. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
Page 6 SPECIFICATIONS: DRILL-DRIVER CTH1202K2 CTH1442K2 CTH1802 Chuck 3/8 in. Keyless 3/8 in. Keyless 1/2 in. Keyless Motor DC Motor 12.0 V DC Motor 14.
Page 7 OPERA TION Fig. 1 Fig. 2 KNOW YOUR DRILL-DRIVER See Figures 1 and 2. Before attempting to use any tool, familiarize yourself with all operating features and safety requirements. W ARNING: Do not allow familiarity with tools to make you careless.
Page 8 OPERA TION Fig. 5 Fig. 4 W ARNING: If any parts are missing, do not operate tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. SWITCH See Figure 4. Your drill starts and stops by depressing and releasing the switch trigger.
Page 9 CHUCK BODY CHUCK COLLAR OPERA TION Fig. 6 Fig. 7 TO INSTALL BATTERY PACK ■ Place the direction of rotation selector in center posi- tion. See Figure 4. ■ Place the battery pack in your drill. Align raised rib on battery pack with groove in drill's battery port.
Page 10 OPERA TION Fig. 8 Fig. 10 INSTALLING AND REMOVING BITS ■ Place the direction of rotation selector at the center position. This will turn off the power to your drill. ■ Open or close the chuck jaws to a point where the opening is slightly larger than the bit size you intend to use.
Page 11 OPERA TION W ARNING: Be prepared for binding or breakthrough. When these situations occur , the drill has a tendency to grab and kick in the opposite direction, and could cause loss of control when breaking through material. If you are not prepared, this loss of control can result in possible serious injury .
Page 12 OPERA TION Fig. 13 Fig. 14 CHUCK REMOV AL See Figures 13, 14, and 15. The chuck must be removed in order to use some accessories. T o remove: ■ Lock the switch trigger by placing the direction of rotation selector in center position.
Page 13 MAINTENANCE W ARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. A void using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
1980014 11-00 OPERA TOR'S MANUAL CORDLESS DRILL-DRIVER MODEL NOS. CTH1202K2/CTH1402K2/CTH1802 CTH1202K2/CTH1442K2/CTH1802 R YOBI TECHNOLOGIES INC. 1428 Pearman Dairy Road Anderson, SC 29622 Post Office Box 1207 Anderson, SC 29622-1207 Phone 1-800-525-2579 R YOBI TECHNOLOGIES INC.
An important point after buying a device Ryobi CTH1442K2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi CTH1442K2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi CTH1442K2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi CTH1442K2 you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi CTH1442K2 will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi CTH1442K2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi CTH1442K2.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi CTH1442K2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi CTH1442K2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
