Instruction/ maintenance manual of the product CS30 Ryobi
Go to page of 14
OE OPERATOR'S MANUAL 30cc String Trimmers and Brushcutters ss30 RY30542/RY30943 BC30 RY30562/RY30963 Your new trimmer has been engineered and manufactured to our high standard for dependability, ease of operation, operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
I I I I I I I I I I I General Safety Rules " ' Specific SafetY Rules " ' Symbols Features Assembly 14-18 Operation......... 23-25 A wmuruc, Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury.
SPECIFIC SAFETY RULES FOR TRIMMER USE r Replace string head if cracked, chipped, or damaged in any way. Be sure the string head or blade is properly installed and securelyfastened' Failureto do so can cause serious injury. r lilake sure all guards, straps, deflectors, and handles are properly and securelY attached.
The foltowing signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING A DANGER: il*:fi'"::Jffiiill[.
STARTER GRIP AND ROPE REAR HANDLE TRIGGER L()CK PRIMER BULB DRIVE SHAFT HOUSING THR()TTLE TRIGGER STRI],IG HEAD FRONT HANDLE STRAIGHT SHAFT GRASS DEFLECTOR Fig. 1b STARTER GRIP AND ROPE PRIMER BULB CtlUPLER THROTTLE TRIGGER DRIVE SHAFT HOUSING SHOULDER HARNESS BRUSHCUTTER GUARD Fig.
INSTALLING THE POWER HEAD TO THE ATTACHMENT See Figure 2. A wRnulruc' Never install, remove, or adjust any attachment while power head is running. Failure to stop the engine can cause serious personal injury. The attachment connects to the power head bv means of a coupler device.
fl rl :1 i ,t T: ri ATTACHING THE SHOULDER HARNESS - BC30 See Figure 9. I Connect the latch on the shoulder harness to the strap hanger. r Adjust the strap to a comfortable position.
REMOVING THE STRAIGHT SHAFT GRASS DEFLECTOR AND STRING HEAD See Figures 10 - 13. I Align the slot in the flanged washer with the slot in the gear neao.
A wnnrulruc' Always hold the string trimmer away from the body keep- ing clearance between the body and the product. Any contact with the housing or string trimmer cutting head can result in burns and/or other serious personal injury.
STARTING AND STOPPING See Figures 21 - 23. TO START A COLD ENGINE: DO NOT squeeze the throttle trigger until the engine starts ano runs. r Lay the trimmer on a flat, bare surface. r PRIME - Press the primer bulb 7 times. r SET the start lever to the START posiiion.
STRING REPLACEMENT See Figures 26 - 28' r Stop the engine and disconnect the spark plug wire. Hold the string head and turn the spool retainer clockwise to remove. I Remove the spool from the string head. NOTE: Keep the spring attached to the spool.
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER. IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER' PROBLEM POSSIBLE CAUSE SOLU.
THE FOLLOWING CALIFORNIA AIR RESOURCES BOARD (CARB) STATEMENT ONLY APPLIES TO MODEL NUMBERS REQUIRED TO MEET THE CARB REQUIREMENTS, LIMITED WARRANW STATEMENT Techtronic Industries North America, Inc.
The engine exhaust from this product contains chemicals known to the state of california to "uu"" i"n""t, birth defects or other reproductive harm' r,11 o D D OPERAT.
An important point after buying a device Ryobi CS30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi CS30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi CS30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi CS30 you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi CS30 will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi CS30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi CS30.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi CS30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi CS30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
