Instruction/ maintenance manual of the product 330B, 340BV Ryobi
Go to page of 22
330B – 340BV 2-Cycle Blower – Blower/V ac OPERA TOR’S MANUAL FOR QUESTIONS, CALL 1-800-345-8746 in U.S. or 1-800-265-6778 in CANADA www.ryobi.com IMPORT ANT MANUAL DO NOT THROW AW A Y.
INTRODUCTION T ABLE OF CONTENTS 2 THANK YOU Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator’s manual provides you with easy-to-under- stand operating instructions.
CALIFORNIA EMISSION REGULA TIONS 3 SP ARK ARRESTOR W ARNING! RULES FOR SAFE OPERA TION NOTE: For users on U.S. Forest Land and in the states of California, Maine, Oregon and Washington.
RULES FOR SAFE OPERA TION 4 READ ALL INSTRUCTIONS BEFORE OPERA TING • Read the instructions carefully. Be familiar with the controls and proper use of the unit. • Do not operate this unit when tired, ill, or under the influence of alcohol, drugs, or medication.
RULES FOR SAFE OPERA TION 5 • Do not put any object into openings. Do not use with any opening blocked; keep free of dirt, debris and anything that may reduce the air flow. • Do not touch the engine or muffler. These parts get extremely hot from operation.
SAFETY AND INTERNA TIONAL SYMBOLS This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING • HOT SURF ACE WARNING Do not touch a hot muffler or cylinder . Y ou may get burned. These parts get extremely hot from operation. When turned off they r emain hot for a short time. • INDICA TES OIL Refer to operator's manual for the proper type of oil.
RULES FOR SAFE OPERA TION 8 KNOW YOUR UNIT Assembled as a Blower Assembled as a V acuum (optional kit for model 330B) Upper Vac Tube Lower Vac Tube Vacuum Inlet Door Vacuum Inlet Door Blower Tube Fuel.
ASSEMBL Y INSTRUCTIONS 9 ASSEMBLING UNIT AS A BLOWER Blower Tube Assembly WARNING: T o prevent serious personal injury , stop the engine and allow the impeller to stop before installing or changing tubes. WARNING: T o prevent serious personal injury or damage to the unit, the blower tube must be installed while operating this unit as a blower .
ADJUSTING THE SHOULDER HARNESS (V acuum Kit) WARNING - Hot Surface: T o prevent serious personal injury when operating the unit as a vacuum, hold the unit to the left side of the body (Fig. 7). The muffler becomes extremely hot during operation and can cause burns.
OIL AND FUEL INFORMA TION 11 WARNING: Gasoline is extr emely flammable. Ignited V apors may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while filling the tank. Keep sparks and open flames at a distance from the ar ea.
ST ARTING/STOPPING INSTRUCTIONS 12 Fig. 9 Fig. 10 Fig. 11 ST ARTING INSTRUCTIONS WARNING: A void accidental starting. Be in the starting position whenever pulling the starter rope. The operator and unit must be in a stable position while starting. Also, Do not set unit on any surface except a clean, hard ar ea while starting.
OPERA TING INSTRUCTIONS 13 HOLDING THE BLOWER WARNING: T o prevent serious personal injury to yourself or others, or damage to the unit, make sure all tubes and guar ds are in place before operating your unit.
OPERA TING INSTRUCTIONS 14 Fig. 15 OPERA TING AS A V ACUUM WARNING - Hot Surface: T o prevent serious personal injury when operating the unit as a vacuum, hold the unit to the left side of the body (Fig. 15). The muffler becomes extremely hot during operation and can cause burns.
MAINTENANCE AND REP AIR INSTRUCTIONS 15 FREQUENCY MAINTENANCE REQUIRED REFER TO: Before Starting Engine Fill fuel tank with correct oil and fuel mixture. Page 11 Every 10 Hours Clean and re-oil air filter. Page 15 Every 50 Hours Check spark plug condition and gap.
Fig. 21 MAINTENANCE AND REP AIR INSTRUCTIONS 16 Fig. 20 6. Squeeze the filter to spread the oil (Fig. 20). 7. Reinstall the filter (Fig. 17, Pg 15) 8. Reinstall the carburetor/air filter cover and screws (Fig.
MAINTENANCE AND REP AIR INSTRUCTIONS 17 REPLACING THE SP ARK PLUG Use a Champion RDJ7Y spark plug (or equivalent). The correct air gap is 0.020 inch (0.5 mm.) . Remove the plug after every 50 hours of operation and check its condition. 1. Stop the engine and allow it to cool.
CLEANING AND STORAGE 18 LONG TERM STORAGE If the unit will be stored for an extended time, use the following storage procedure. 1. Drain all fuel from the fuel tank and drain into a container with the same 2-cycle fuel mixture. Do not use fuel that has been stored for more than 60 days.
TROUBLESHOOTING 19 CAUSE ACTION Choke partially on Adjust choke Dirty air filter Clean or replace the air filter Too much oil in fuel mixture Drain gas tank / Add fresh fuel mixture Improper carbureto.
SPECIFICA TIONS 20 Engine T ype . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Air -Cooled, 2-Cycle Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21 The California Air Resources Board and Ryobi Outdoor Products (ROP), are pleased to explain the emission control system warranty on your 1999 and later small off-road engine. In California, new small off-road engines must be designed, built and equipped to meet the State's stringent anti-smog standards.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE TWO (2) YEAR WARRANTY PERIOD OR NINETY (90) DAYS FOR PRODUCTS USED FOR ANY COMMERCIAL PURPOSE. ACCORDINGLY, ANY SUCH IMPLIED WARRANTIES INCLUDING .
An important point after buying a device Ryobi 330B, 340BV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi 330B, 340BV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi 330B, 340BV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi 330B, 340BV you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi 330B, 340BV will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi 330B, 340BV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi 330B, 340BV.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi 330B, 340BV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi 330B, 340BV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
