Instruction/ maintenance manual of the product VMR1 Russound
Go to page of 2
VMR1 Video Matrix Receiver Instruction Manual Copyright © 2007 Russound. All rights reserved. All trademarks ar e the prop- erty of their respective owners. Specifi cations are subject to change without notice. Russound is not responsible for typographical err ors or omissions.
Installation 1. Run CA T -5e cable up to 300 feet (90 m) between the VM1 and the video display locations in the zones. Note: When running CA T -5e cables, avoid AC power wiring. If you have to run the cables parallel to electrical wiring, space the cable at least 12 inches (30 cm) from AC power lines.
An important point after buying a device Russound VMR1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Russound VMR1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Russound VMR1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Russound VMR1 you will learn all the available features of the product, as well as information on its operation. The information that you get Russound VMR1 will certainly help you make a decision on the purchase.
If you already are a holder of Russound VMR1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Russound VMR1.
However, one of the most important roles played by the user manual is to help in solving problems with Russound VMR1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Russound VMR1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
