Instruction/ maintenance manual of the product ISK4 Russound
Go to page of 16
ISK4 ComPoint ® Camera Door Station Instruction Manual.
2 Important Safety Instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER-SERVICEABLE P ARTS INSIDE. REFER SER- VICING TO QUALIFIED SERVICE PERSONNEL.
3 Pr oduct Overview The ISK4 Camera Door Station is a fl ush-mounted weatherproof call station and door camera specifi cally for use with a Russound ComPoint ® intercom system. It featur es a low-light-level monochrome security camera that can be connected to a display or CCTV system to allow the homeowner to see visitors at the door .
4 Fr ont View 1 2 3 4 1 2 3 4 CAMERA – Provides a constant video signal for a monitor or CCTV system MICROPHONE AND SPEAKER – Provide two-way communication with interior keypads CALL BUTTON – Ri.
5 Rear View BR BR/W G G/W O O/W BL BL/W 5 1 2 3 4 1 2 3 4 110 PUNCH-DOWN BLOCK – For CA T -5 intercom cable connection POTENTIOMETER – Sets speaker volume CAMERA – Angle adjusts to accommodate p.
6 Installation and T rim The ISK4 Camera Door Station installs in a standard double-gang UL/CSA-appr oved plastic wall box with an internal volume of at least 32 cubic inches (524 cm 3 ). Its gasketed weather- resistant fr ont plate protects the internal components fr om the elements.
7 Intercom Connection The door station provides a 110 punch-down connector for the CA T-5 cable fr om the ComPoint hub. Use a punch-down tool to connect the wires accor ding to the connector color code as shown below .
8 Camera Connection Using CA T -5 T o connect the camera video and power using a single CA T-5 cable: 1. At each end of the cable, separate the brown and br own/white wires fr om the other pairs. Leave enough length on the brown pair for splicing. 2. Crimp RJ-45 connectors on the remaining pairs as shown below .
9 Adapter cable (included) BR BR/W G G/W O O/W BL BL/W T o video display 846C power supply CA T -5 cable Butt splice Butt splice BNC-RCA adapter Video lead Power leads ISK4 MOD-VB Camera connection using CA T -5 cable for video and power Note: The ISK4 camera requir es a regulated 12 VDC power supply .
10 Camera Connection Using RG-59 and 2-Conductor Cables T o connect the camera using RG-59 cable for video and 2-conductor cable for power: 1. Butt splice the camera power leads on the included adapte.
11 BR BR/W G G/W O O/W BL BL/W T o video display 846C power supply RG-59 cable 2-conductor cable ISK4 Butt splice Butt splice Adapter cable (included) Video lead Power leads Camera connection using RG-59 cable for video and 2-conductor cable for power Note: The ISK4 camera requir es a regulated 12 VDC power supply .
12 Camera Adjustment Note: We r ecommend connecting the adapter cable to the camera before adjusting it. The ISK4 camera is mounted in a yoke that allows both pan and tilt adjustments so you can point the camera toward visitors at the door . T o adjust the camera angle: 1.
13 1 Y oke mounting screw Adjusting the horizontal camera angle 2 Tilt screws Adjusting the vertical camera angle.
14 Powering Up After making all connections and installing the ISK4 in the wall box, plug the camera power supply into an AC receptacle and power up the ComPoint system. Also power up the video display being used to receive the camera signal. Check the camera angle to make sure a person standing at the door is visible.
15 T echnical Specifi cations User control: Call button with amber backlight Audio input: Built-in microphone with automatic gain control Amplifi er: Monaural (for system functions only) Amplifi er.
ISK4 ComPoint ® Camera Door Station Instruction Manual Russound 5 Forbes Road, Newmarket NH 03857 USA T el 603.659.5170 • Fax 603.659.5388 www.russound.com T echnical Support: tech@russound.com 28-1301 1/15/08 Copyright © 2008 Russound. All rights reserved.
An important point after buying a device Russound ISK4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Russound ISK4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Russound ISK4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Russound ISK4 you will learn all the available features of the product, as well as information on its operation. The information that you get Russound ISK4 will certainly help you make a decision on the purchase.
If you already are a holder of Russound ISK4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Russound ISK4.
However, one of the most important roles played by the user manual is to help in solving problems with Russound ISK4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Russound ISK4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
