Instruction/ maintenance manual of the product SC-50D Runco
Go to page of 124
SC-50d Series SC-60d Series Full-HD Private Cinema Projector and Digital High Definition (DHD) Controller/Processor I NSTALLATION /O PERATION M ANUAL.
.
Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual iii PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warranty Congratulations o n your purchase of a Runco® product ! With proper installation, se tup and care, you should enjoy many yea rs of unpara lleled video p erformance.
iv Signature Cinema™ SC-50d/SC-60d Installation /Operation Manual PRE L IMINAR Y In the event o f a product de fect, please fo llow the warra nty claim proc edure provided b elow: 1. The Custome r is required to contact a Runco dealer or Runco Te chnical Suppor t via email at sup port@runco.
Signature Cinema™ SC- 50d/SC-60d Installation /Operation Man ual v PRE L IMINAR Y h Expected lam p degradation and normal decrease in lamp output o ver a period of time or a s the lamp is co nsumed .
vi Signature Cinema™ SC-50d/SC-60d Installation/O peration Manual PRE L IMINAR Y Please visit http:// www.runco.c om/support /product-r egistration/ to r egister prod uct. RUNCO PROVIDES NO WARRANTIES, EXPRESS OR IMPLIED, EXCEPT THOSE EXPRESSLY PROVIDED HEREIN.
Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual vii PRE L IMINAR Y Thank you fo r your purchase of this qualit y Runco video product! Fo r the best pe rformance, please read this m anual carefully as it is your guid e through the menus and ope ration.
viii Signature Cinema™ SC-50d/SC-60d Installati on/Operation Man ual PRE L IMINAR Y Manufacturer’s Name: Runco International, LL C Manufacture r’s Address: 119 5 NW Compton Dr ive, Beaverton, OR.
Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual ix PRE L IMINAR Y NOTE: This equipmen t has been tested and fo und to comply with the limits for a Class A digital device, pursua nt to Part 15 of the FCC Rules.
x Signature Cinema™ SC-50d/SC-60d Installati on/Operation Man ual PRE L IMINAR Y Note s :.
Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual xi 1 Table of Content s PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warran ty ........ ................... ................. ....... iii Important S afety In s truction s ...
Table of Contents xii Signature Cine ma™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Installation Consid erations ......... ............. ................ ................. ................ ................ ... 17 Installation Ty pe .
Table of Contents Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual xi ii PRE L IMINAR Y 4. Operation .......... ................ ................ ................ ................ ................ ............. .......... 51 Using the On-Sc reen Menus .
Table of Contents xiv Signature Cinema™ SC-50d/SC-60d Installati on/Operation Man ual PRE L IMINAR Y Note s :.
Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual xv 1 Li s t of Figure s PRE L IMINAR Y 2-1. SC-50d/ SC-60d Top/ Rear/Front View .... ................ ................. ................ ................ ..... 5 2-2. SC-50d/SC -60d Input Panel .
List of Figures xvi Signature Cinema™ SC-50d/SC-60d Installati on/Operation Man ual PRE L IMINAR Y 4-5. Typical Te st Pattern for Adjusting Sharpn ess .......... ................. ................ ................ ... 60 4-6. Overscan Modes ........
Introd uction Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s M anual describe s how to install, set up and ope rate the Runc o Signature Cinema™ Series SC-50d/SC-60 d Private Cinema Proje ctor and DHD Contr oller.
Introduc tion 2 Signature Cine ma™ SC-50d/SC-60d Installation /Operation Manual PRE L IMINAR Y Graphic Convention s : These sym bols appear in n umerous plac es throughout the manual, to emp hasize points th at you must k eep in mind to a void problems wit h your equipment o r injury: 1.
Introd uction Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Offering the b est in high-end luxur y projection, the new Signa.
Introduc tion 4 Signature Cine ma™ SC-50d/SC-60d Installation /Operation Manual PRE L IMINAR Y Key Features and Benefits The SC-50d/SC-60 d offers thes e key features and benefit s: • Cinema-quali.
Controls and Functi ons Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 5 PRE L IMINAR Y 2.1 SC-50d/SC-60d at a Glance Figure 2-1 shows the key SC-50d/S C-60d components.
Controls and Functions 6 Signature Cine ma™ SC-50d/SC-60d Installation /Operation Manual PRE L IMINAR Y 1. RIGHT (INT AKE) S IDE P AN EL The right side panel is perforated to allow coo l air to enter the projector. 2. LEF T (EXHAU S T) S IDE P ANEL The left side p anel is perforated t o allow warm air to exit the p rojector.
Controls and Functi ons Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 7 PRE L IMINAR Y 1. R S 232 IN Connect the RS-232 output from the DH D Controller here , using the pr ovided RJ11-to-DB9 adapt er and communicatio n cable. 2. PWR LED Lights green to indicate tha t power is ap p lied and the module is initialized.
Controls and Functions 8 Signature Cine ma™ SC-50d/SC-60d Installation /Operation Manual PRE L IMINAR Y 2.3 DHD Controller Front Panel Figure 2-3 shows the controls and ind icato rs on the DHD Controller front panel; the paragraph s that follow describ e them.
Controls and Functi ons Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 9 PRE L IMINAR Y 7. RIGHT BUTTON Used to direct -select inputs o r move the OSD m enu cursor to the right.
Controls and Functions 10 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y 4. R S -232 (T o Acce ss ory Box) A male, 9-pin D-s ub connecto r for interfac ing with externa l equipment. (For future use.) 5. Di s play Control Connect this to th e RS-232 input on the SC-50d/SC-60d projec tor.
Controls and Functi ons Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 11 PRE L IMINAR Y 2.5 SC-50d/SC-60d Remote Control Units The SC-50d/SC-60d ships with two remote control units: • A standard Runco DHD Controll er remote control unit; and • A “setup” re mote contro l unit for makin g lens adjust ments.
Controls and Functions 12 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y 1. IR OUTPUT INDICA TOR Lights when a button is pressed to indicat e that an IR signal is being transmit ted. 2. LIGHT Press to illumin ate the buttons.
Controls and Functi ons Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 13 PRE L IMINAR Y 10. HD 1 (4) / HD 2 (5) Press to select a HD (RGBHV or YPbPr c omponent) input or to ent er the numeri c character “4” or “5.
Controls and Functions 14 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Setup Remote Control The setup rem ote control unit fur nished with the SC-50d /SC-60d gives you ac cess to the motorize d lens controls (p osition, focus and zoom).
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 15 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Press down the tab on the cover an d pull the cove r in the direct ion of the arrow. 2.
Installation 16 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Notes on Remote Control Operation • Make sure that there is nothing obstr ucting the in frared beam between th e remote control and the IR rece iver on the DHD Controller .
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 17 PRE L IMINAR Y 3.3 Installation Considerations Proper installation of you r projector will ensure the qualit y of your display.
Installation 18 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Throw Distance Throw distance is the distanc e measured from the fro nt of the projector to the scre en.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 19 PRE L IMINAR Y Vertical and Horizontal Position Proper placement of the projector relative to the screen will yield a rectangular , perfectly-centered image that completely fills the screen.
Installation 20 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Figure 3-4. Horizontal Len s S hift (EXAMPLE ONLY) 0% Screen Center 100% Width Lens Shift (1.0 x W) 50% Width Lens Shift (0.5 x W) Screen Width (W) Note: This is a general example of lens shift.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 21 PRE L IMINAR Y Table 3-4 lists the lens shift limits for each available SC-50 d/SC-60d lens, as perc entages and absolute meas urements with a 120 x 67. 5 inch (1.78:1) scr een.
Installation 22 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Folded Optics In rear-screen applications wher e space behin d the projector is limited, a mirro r may be used to fold the optical path, as shown in Figure 3-5.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 23 PRE L IMINAR Y Audio/Video Synchronization Issues Due to its extraor dinarily high level of video processing perfor mance, the DHD Control ler may distribute video signals with a perceptible level of audio laten cy.
Installation 24 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Ventilation If you are moun ting the SC-50d /SC-60d in an enclo sure, leave at le ast 10 inches (250 mm) o f space on th e left and r ight sides b etween it and surrounding objects, as shown in Figur e 3-6.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 25 PRE L IMINAR Y 3.4 Installing the Primary Projection Lens The projection le ns is shipped separately fro m the projector. Pr oceed as follows to install it: 1. Remove the len s plug from t h e lens opening in the projector.
Installation 26 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y 3.5 Installing the Optional CineWide with AutoScope Lens Motor If you are in stalling a stan dard SC-50d/SC-6 0d (without an a namorphic lens), skip this step and procee d with Mounting the SC-50d/SC- 60d (page 27).
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 27 PRE L IMINAR Y 3.6 Mounting the SC-50d/SC-60d There are se veral methods fo r mounting t he projector. D epending on your chosen installation, one method may be more suit able than a nother.
Installation 28 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Adjusting the Projection Angle If the screen is sig nificantly higher or lower than the project or, you can also tilt the projector at a slight angle. In a ceiling installation, you do this by adjusting the ceiling mount.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 29 PRE L IMINAR Y 3.7 Connections to the SC-50d/SC-60d and DHD Controller Proceed as foll ows to connect the DHD Controller to the SC-50d/SC- 60d, your video sources, exter nal controller( s) – if present – and AC power.
Installation 30 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y R S -232 Connection: Connect the Di s play Control output from the DH D Controller to the R S -232 input on the SC-50d/SC-60d. Use a standard, modu lar telephone c able with RJ11 plugs at bo th ends.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 31 PRE L IMINAR Y Connecting Source Components to the DHD Controller Connect your vid eo sources to t he DHD Controller as shown and des cribed in the sections that follow.
Installation 32 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Component Video S ourc e Connection s : Conn ect your c omponen t video sources to the HD1, HD2 a nd/or Compo nent/SCART inputs as shown in Figure 3-12. Figure 3-12.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 33 PRE L IMINAR Y RGBHV S ource C onnectio n s : Connect personal co mputers and/or other RGB sou rces to the HD1 and/or HD2 in puts as shown in Figure 3-13.
Installation 34 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y S CART RGB S S ource Connection s : Connect the g reen, blue a nd red output s from your SCART sour ce to the Compo nent/SCART input on the DHD Cont roller.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 35 PRE L IMINAR Y Compo s ite S ource Connect ion s : See Figure 3-15. Figure 3-15.
Installation 36 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Connecting an Audio Processor or Secondar y Display Device to the DHD Controller (Optional) The DHD Con.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 37 PRE L IMINAR Y Additional Connections to the DHD Controller (Optional) The DHD Controller provides the followin g inte.
Installation 38 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Connecting 12-volt Trigger Output s to External Equipment: If you are installing an SC-50d/CineWide wit.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 39 PRE L IMINAR Y Connecting an External IR Receiver to th e DHD Controller: If infrared signals from the remote control .
Installation 40 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Ethernet Network Connection: Use a standard, Cat egory 5 netw ork cable with an RJ-45 plug to connect a n etwork hub, router or g ateway to th e Ethernet po rt on the DHD Controller; see Figure 3-20.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 41 PRE L IMINAR Y 3.8 Turning on the Power 1. Power up your sour ce component s. 2. Turn on the main power switch at the rear of th e projector. 3. If this is an AutoScop e-equipped proje ctor, turn on the main power sw itch at the rear of the AutoScope lens mo tor.
Installation 42 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y 3.10 Adjusting the Picture Orientation By default, th e SC-50d/SC-60d is config ured for a “floor/front” inst allation, in which the projector is installe d upright and in front of the screen.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 43 PRE L IMINAR Y 3.11 Adjusting the Image Geometry Projector and /or screen p lacement — a mong other things — c an cause geom etric distortion in th e projected ima ge.
Installation 44 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y “Keystoning” usu ally occurs when the pro jector is tilted relative to the screen. “Pincushion ” distortion can so metimes occu r if the thr ow distance is ve ry short and/o r the projector is equipped with a n anamorph ic lens.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 45 PRE L IMINAR Y 3.12 Installing and Adjusting the CineWide Anamorphic Lens If you are installin g an SC-50d/CineWide with AutoScope or SC-60d/CineWid e with AutoScope, pro ceed as follows to install and adjust the secondary anamorphic lens.
Installation 46 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Attach Lens Mounting Assembly to Lens Motor Carriage Plate 1. Remove the t wo Yaw/X Adju stment Lever s (item #8) from the bottom of the Anamorphic Le ns Holder (item #5).
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 47 PRE L IMINAR Y Configure Lens Motor Trigger (CineWide with AutoScope) CineWide with Auto Scope maintains c onstant ima ge height indepe ndent of the aspect ratio, while using th e full display resoluti on of the projector.
Installation 48 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Adju s ting the Height (Y): With the white field still on-screen , loosen the Height/Y Adjust ment T-Screws o n either side of t he lens.
Installation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 49 PRE L IMINAR Y Yaw Adju s t: Loosen the Y aw/X- Adjustment Levers to allow the len s to pivot freely from side to side.
Installation 50 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Focu s : Finally, rotate the Focu s Ring on the anamorphic lens to fine-tune the optical focus. Verify Proper Imag e Alignment with Anamorphic Lens After you have installed the ana morphic lens, en sure that the 2 .
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 51 PRE L IMINAR Y 4.1 Using the On-Screen Menus To display t he Main Menu , press the MENU button on the re mote control or DHD Controller fro nt panel (Figure 2-3).
Operation 52 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Figure 4-1. S C-50d/ S C-60d O S D Menu S tructur e (continued) S ervice Test Vide o Color Bars 1 Color Ba.
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 53 PRE L IMINAR Y Main Menu The Main Menu is the startin g point fo r accessing all DHD Controller functions. (You must enter a passcode to access the Calibr ation and Se rvice menus.
Operation 54 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Table 4-1. A s pect Ratio S etting s A s pect Ratio Remote Control Key De s cription 16:9 16:9 Select 1 6:9 to vie w 16:9 DV Ds and HDTV programs in their native aspec t ratio.
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 55 PRE L IMINAR Y Cinema CINEMA Select Cinema to view 2.35 source material in its native aspect ratio.
Operation 56 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Picture Use the controls in the Pictu re Menu to ca librate each DHD Controller inpu t to achieve optimum picture qua lity.
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 57 PRE L IMINAR Y PLUGE patterns va ry but ge nerally consist of so me combinat ion of black, w hite and gray areas against a blac k background. T he example above includes two vertica l bars and four shaded boxes.
Operation 58 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Color S aturation: On your e xternal test patt ern source, se lect a color bar pattern like the one shown in F igure 4-4. Figure 4-4. Typical Color Bar Pattern for Adju s ting Color S aturation and Tint 1.
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 59 PRE L IMINAR Y 11.Adjust the color sa turation level until the out ermost (gray and bl ue) color bars appear to be a single shade of bl ue: Tint: Tint or “hue” is essentially the r atio of red t o green in th e color por tion of the im age.
Operation 60 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y S harpne ss : “Sharpness” is th e amount of high-frequen cy detail in the image . To adjust sharpness, select Shar pness from the Pictur e menu and press ENTER .
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 61 PRE L IMINAR Y Height: Select Height from the Input Position menu to change the p rojected image height.
Operation 62 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Pha s e (RGB, Comp onent or S CART s ource s ): This control adjusts the phase of the pixel sampling clock relative to the inc oming signal.
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 63 PRE L IMINAR Y You should save ch anges to any of the follo wing settings to a pres et; otherwise they will be lost when .
Operation 64 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Information S ignal / S y s tem: Select Infor mation from th e Main Men u, then choose either Signal or Sy.
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 65 PRE L IMINAR Y Calibration Use the Calibrat ion menu to per form advanced picture quality ad justments. Th i s menu s hould be u s ed by I S F-certified technician s only .
Operation 66 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y •L a m p : Select L amp from the Display Color me nu to adjust the projector lam p brightness. • Mode: With the SC-50d/SC-60d, two lamp adju stment modes are availa ble: Power (recommende d) or Intensity.
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 67 PRE L IMINAR Y Figure 4-7. CIE 1931 Ch romaticity Diagram • S imple: Se le c t S i mp l e mo d e fr o m th e Co l o r T e mp m e nu t o ch o os e o ne o f fi v e c o lo r temperature preset s: 3200K, 5500K, 6500 K, 7500K and 9300 K.
Operation 68 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y •R V R : Use the R VR control to increase or decr ease the Reflecta nce Volume Regulation setting. RVR lets you adjust the aperture or iris size (the physical open ing through th e lens; similar to a n “f-stop” on a came ra).
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 69 PRE L IMINAR Y To use this fea ture, select Copy/Paste from the Calib ration menu.
Operation 70 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Service Use the Service m enu to access advanced projecto r configuration settings.
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 71 PRE L IMINAR Y Input Name s : You can give each input a descriptive name . For example, y ou may want to change th e default input na me to the type of sour ce component connected t o it: “VCR,” “DVD,” “Laptop” et cet era.
Operation 72 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y • IP Addre ss : Select IP Address from the IP Configuration me nu to manually configure the IP Address of the DHD Controller, a s follows: 1. Press or to select the first, second , third or fourt h byte of the address.
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 73 PRE L IMINAR Y • E-Mail Notification: Select E-Mail Notification from the Netw ork menu to spec ify when and to whom the DHD Controller sends error and service notification messages via e-mail.
Operation 74 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y • Periodic S ervice Notification: You can ha ve the DHD Contr oller send pe riodic reminders via e-mail to perform reg ular maintenance tasks. To do this: 1.
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 75 PRE L IMINAR Y • Remote Network Control: Select Remote Network Cont r ol from the Networ k menu to enable or disa ble control of the DHD Controller via an IP connec tion (typically usin g a web browser) .
Operation 76 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Color S pace: Select Color Space from th e Service menu to choose the color space o f the source signal for HDMI, RGB, an d component co nnections.
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 77 PRE L IMINAR Y • Film Mode: Use Film Mode to smooth out moving images from interlaced , standard-definitio n (SD) sources. In most ca ses, the DHD C ontroller detect s the proper “pull-down” rate a nd vertical fre quency.
Operation 78 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y S ync Thre s hold: Select Sync Threshold to ad just the thresho ld at which negative pu lses on the com ponent video green/luma cha nnel are inter preted to be s ync pulses.
Operation Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 79 PRE L IMINAR Y Front Panel Brightne ss : Select Front Panel Brightness fro m the Service menu to ad just the brightness o f the front-pan el LED and LCD sta tus indicators.
Operation 80 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Note s :.
Maintenance and Troubleshooting Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 81 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be replac ed when it rea ches the end of its life (typ ically 2,000 hou rs), or sooner if a no ticeable degr adation in br ightness occur s.
Maintenance and Troublesho oting 82 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y 5. Install the new la mp: a Take care to align the new lamp properly in th e correct orie ntation inside th e lamp compartm ent. b Press firmly on the lamp to properly seat it.
Maintenance and Troubleshooting Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 83 PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guideli nes for troublesho oting problems you may encounter with th e SC-50d/SC-60d.
Maintenance and Troublesho oting 84 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y The display is jittery or unstable. • Poor-quality or improperly connected source. • The horizontal or vertical scan frequency of the input signal may be out of range for the projector.
External Control Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 85 PRE L IMINAR Y In addition to using the DHD Cont roller front-panel keyp ad or remote control unit, the re are thr.
External Control 86 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Table 6-1 lists the RS-232 comman d set. The “Param eter (min/m ax)” column shows the valid parameter ranges, or “NA” for comman ds that take no paramet ers.
External Control Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 87 PRE L IMINAR Y A s pect Ratio Command s 16:9 NA YES Selects the 16:9 aspect ratio 4:3 NA YES Selects the 4: 3 aspe.
External Control 88 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Image Pre s et Command s CUSTOM1 NA YES Loads “Custom 1” image preset CUSTOM2 NA YES Loads “C.
External Control Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 89 PRE L IMINAR Y S leep Timer Command s SLEEPTMR? NA NA Returns sleep timer setting STOFF NA YES Sets the sleep time.
External Control 90 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y 6.2 Using Discrete IR Codes The DHD Controller acce pts commands in th e form of IR signals that co nform to the Phillips RC5 protocol. Ea ch DHD Controller remo te control button has an RC5 control code associated with it.
External Control Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 91 PRE L IMINAR Y For example, here is the RC5 control code for the ON button on th e DHD Controller remote contro l unit (assuming the default add ress is used): Figure 6-1 shows the pulse train fo r this command (with the togg le bit set to zero).
External Control 92 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y IR Command List Table 6 -2 lists the RC5 control code s for the DH D Controller.
External Control Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 93 PRE L IMINAR Y ST60MIN 0x34 62 0x3C62 Sets the sleep timer to 60 minutes ST90MIN 0x34 63 0x3C63 Sets the sleep tim.
External Control 94 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y 6.3 Using HDMI CEC Messages The DHD Controller accept s and can respond to CEC command messag es from a disc player, satellite re ceiver or DVR/set-to p bo x via an HDMI connec tion.
External Control Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 95 PRE L IMINAR Y Give Physical Address 0x83 – √ Set Stream Path 0x86 – √ Get CEC Version 0x9F – √ Abort .
External Control 96 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual PRE L IMINAR Y Note s :.
Specifications Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 97 PRE L IMINAR Y 7.1 SC-50d/SC-60d Projector Specifications Table 7-1 lists the SC-50d/SC- 60d project or spec ifications.
Specifications 98 Signature Cinema™ SC-50d/SC-60d Installation /Operation Man ual P RELI M INARY Illumination S y s tem: 200W (SC-50d) or 350W (SC-60d) HPM lamp Power Requirement s : 100 VAC to 240 VAC +/- 10% @ 50/60Hz Power Con s umption: S C-50d - 1135W maximum; Current - 11.
Specifications Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 99 PRE L IMINAR Y 7.2 DHD Controller Specifications Table 7-2 lists the DHD Cont roller specifications.
Specifications 100 Signature Cinema™ SC-50d/SC-60d Installati on/Operation Ma nual P RELI M INARY Regulatory Appro val s : cTUVus, FCC cla ss B, CE, RoHS, China RoHS, WEEE , C-Tick, CCC, local conformances as required Limited Warranty: Two (2) years parts an d labor from the date of shipment from Runco.
Specifications Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 101 PRE L IMINAR Y 7.3 SC-50d/SC-60d Dimensions Figure 7-1 sho ws the SC-50d/SC -60d dimensio ns. Figure 7-1. S C-50d/ S C-60d Dimen s ion s 617.8mm 24.3in m m 6 . 7 5 8 n i 8 .
Specifications 102 Signature Cinema™ SC-50d/SC-60d Installati on/Operation Ma nual P RELI M INARY 7.4 SC-50d/SC-60d Dimensions with CineWide with AutoScope Assembly Figure 7-2 shows the SC-50d/S C-60d dimens ions with the optional Cin eWide with AutoScope assembly.
Specifications Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 103 PRE L IMINAR Y 7.5 Supported Timings Table 7-3 lists the signal types support ed by each input on the DHD Controller.
Specifications 104 Signature Cinema™ SC-50d/SC-60d Installati on/Operation Ma nual P RELI M INARY 1280x1024 1280x1024 60.00 63.981 108.000 √√√ – – 75.00 79.976 135.000 √√√ – – 85.00 91.146 157.500 √√√ – – 1360x768 1360x768 60.
Specifications Signature Cinema™ SC- 50d/SC-60d Installation /Operation Manual 105 PRE L IMINAR Y 1280x1024 1280x1024 60.00 63.981 108.000 √√√ – – 75.00 79.976 135.000 √√√ – – 85.00 91.146 157.500 √√√ – – 1360x768 1360x768 60.
Specifications 106 Signature Cinema™ SC-50d/SC-60d Installati on/Operation Ma nual P RELI M INARY PAL-M – 59.94/60.00 15.734/15.750 3.5 80 –––– √ PAL-N – 5 0.00 15.625 3.580 –––– √ SECAM – 50.00 15.625 13.500 ––– √√ Table 7-3.
.
Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com 020-1105-00 Rev. A March 2011.
An important point after buying a device Runco SC-50D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Runco SC-50D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Runco SC-50D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Runco SC-50D you will learn all the available features of the product, as well as information on its operation. The information that you get Runco SC-50D will certainly help you make a decision on the purchase.
If you already are a holder of Runco SC-50D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Runco SC-50D.
However, one of the most important roles played by the user manual is to help in solving problems with Runco SC-50D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Runco SC-50D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center