Instruction/ maintenance manual of the product SC-30d Runco
Go to page of 156
SC-30d and SC-35d Active 3D Home Theater Projector and DC-300 Dimension Digital Controller I NSTALLATION /O PERATION M ANUAL.
.
Runco SC-30d/SC-35d Installa tion/Opera tion Manual iii PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warranty Congratulations o n your purchas e of a Runco® produ ct! With proper installa tion, setup and car e, you should enjoy m any years of unpara lleled video p erformanc e.
iv Runco SC-30d/SC-35d Inst allation /Operation Manual PRE L IMINAR Y • In the event of a product defec t, please follo w the claim pr ocedure provid ed below: A. Register your p roduct if you have not yet done so. Visit http://ww w.runco.com /support/p roduct-reg istration/ to register the p roduct.
Runco SC-30d/SC-35d Insta llation /Operation Manual v PRE L IMINAR Y 4. Damage, det erioration, or malfunction re sulting from: A. Accident, abus e, misuse, neg lect, imprope r ventilation, fire, wate.
vi Runco SC-30d/SC-35d Inst allation /Operation Manual PRE L IMINAR Y Runco offers e xtended and e xpanded se rvice plans. Fo r information on additional p roduct prote ction, please a sk your authorized Run co dealer , email service orders@runc o.com or c all (toll free) (800 ) 23RUNCO (800-23 7-8626).
Runco SC-30d/SC-35d Installa tion/Opera tion Manual vii PRE L IMINAR Y Thank you fo r your purch ase of this qua lity Runco video produc t! For the b est performa nce, please read this ma nual carefully as it is your guid e through t he menus and o peration.
viii Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Please read an d make sure you understan d the follow ing safety inform ation before using the product for viewing 3D con tent. Provide this infor mation to the e nd users of this product an d ensure tha t they unders tand it.
Runco SC-30d/SC-35d Installa tion/Opera tion Manual ix PRE L IMINAR Y Manufacturer’s Name: Run co International, LLC Manufacture r’s Address: 119 5 NW Compto n Drive, Beaverto n, OR 97006 -1992 he.
x Runc o SC-30d/SC-35d Inst allation/Operati on Manual PRE L IMINAR Y NOTE: This equipment ha s been tested and found to comply w ith the limits fo r a Class B d igital device , pursuant to Part 15 of the FCC Rules. T hese limits are designed to provide reas onable protect ion against har mful interference in a residential installation.
Runco SC-30d/SC-35d Installa tion/Opera tion Manual xi 1 Table of Content s PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warran ty ........ ................ ............. .............. iii Important S afety In s truction s .................
Table of Contents xii Runco SC-30d/SC-35d Inst allation/Operation Man ual PRE L IMINAR Y Installation Consid erations ................ ................ ............. ................ ............. ................ 21 Pre-Wiring for 3D: Run Dual H DMI Cables .
Table of Contents Runco SC-30d/SC-35d Installa tion/Opera tion Manual xiii PRE L IMINAR Y Primary Lens Ad justments: F ocus, Zoom and Positio n ..... ................ ............. ............. 51 Focus ......... ............ ................. ......
Table of Contents xiv Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 6. External Control ............... ................ ............. ................ ................ ............. ........... 105 Serial or TCP/IP Co mmunications .
Runco SC-30d/SC-35d Insta llation /Operation Manual xv 1 Li s t of Figure s PRE L IMINAR Y 2-1. SC-30d/ SC-35d Active 3 D Projection System Block Diagram ............. ................. ........ 5 2-2. SC-30d/ SC-35d Fron t/Bottom/ Side/Top View s ...
List of Figures xvi Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3-28. Image Alignmen t Controls ........................ ............ ................. ............ ................. ...... 54 3-29. Cylindrical Anamorp hic Lens Mounting Assembly - Ex ploded View .
Introd uction Runco SC-30d/SC-35d Insta llation/Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s M anual descr ibes how to in stall, set up and operate th e Runco SC-30d/SC-35d Active 3D Pro jection System . Throughout th is manual, the Runco SC-30d/SC-3 5d Active 3D Proj ection System is referred to as the “SC-30d/SC-35d.
Introduc tion 2 Runco SC-30d/SC-35d Inst allation/Operation Man ual PRE L IMINAR Y Graphic Convention s : These symb ols appear in n umerous plac es througho ut the manual, to emp hasize points that you must k eep in mind to avoid proble ms with your equipment o r injury: 1.
Introd uction Runco SC-30d/SC-35d Insta llation/Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Offering the b est in high-end lu xury projection , the new Signa ture Cinema™ SC-30d/SC-35d Active 3D Pro jection System expand s Runco’s most prestigi ous line of custom-built perso nal cinema projecto rs.
Introduc tion 4 Runco SC-30d/SC-35d Inst allation/Operation Man ual PRE L IMINAR Y Key Features and Benefits The SC-30d/SC-35 d offers thes e key featur es and be nefits: • Native Resolution: 1920 x 108 0 (16:9 Native Aspect Ratio) • Three-chip Digita l Light Processing (D LP™) system • DisplayPort 1.
System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 5 PRE L IMINAR Y A SC-30d/SC-35d Active 3D Projection Syste m consists o f the following components: • The projector (equipped with dual digit al video inputs) with op tional anamorph ic lens and lens trans port assembly.
System Overview 6 Runco SC-30d/SC-35d Inst allation/Operation Man ual PRE L IMINAR Y 2.1 Projector A SC-30d/SC-35d Active 3D Projection Syst em can display both traditional 2 D and stereoscopic 3D video co ntent. An active 3D pr esentation req uires a specialized v ideo signal so urce config uration and content to be displayed corr ectly.
System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 7 PRE L IMINAR Y 1. PROJECTION LEN S The inside o f the lens b arrel is th readed to a ccommod ate a standa rd, 72-mm lens filter. For examp le, with a smaller screen you can install a neutral-de nsity filter to reduce the overa ll light output.
System Overview 8 Runco SC-30d/SC-35d Inst allation/Operation Man ual PRE L IMINAR Y 1. R S 232 (Contr ol) A female, 9-pin D-su b connector that provides a serial commun ication link to th e Dimension Digital Controller, via its Pri. Di s play Control output (see Figure 2 -5).
System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 9 PRE L IMINAR Y 2.3 DC-300 Dimension Digital Controller The Dimension Digital Contr oller provides “left-eye” and “r ight-eye” video sig nals and the OSD menu to t he projector .
System Overview 10 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 6. DOWN BUTTON Use to direct-se lect aspect ratios or move the menu curso r down in the OSD.
System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 11 PRE L IMINAR Y Rear Panel Layout Figure 2-5 sho ws the rear con nector panel o n the Dimension Digital Controller. Figure 2-5. DC-300 Dimen s ion Digital Controller Rear Panel 1. MAIN POWER S WITCH Disconnects or ap plies power to t he Dimension Digital Controller.
System Overview 12 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 11. Di s playPort DisplayPort 1.1a and DisplayPort-HDCP 1. 1 complia nt, SD/HD inpu t for co nnecting SDTV, EDTV or HDTV c omponent video sources.
System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 13 PRE L IMINAR Y 2.4 SC-30d/SC-35d Remote Control Unit Figure 2-6 sho ws the SC-30d/SC -35d remote control, and the pa ragraphs tha t follow describe its functionality.
System Overview 14 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 1. IR OUTPUT INDICA TOR Lights when a button is pre ssed to indic ate that an IR signal is being tr ansmitted. 2. OFF ( S tandard) / S leep Timer = 30 Minute s (Extended) Press to turn off the Dimensio n Digital Controlle r and projecto r.
System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 15 PRE L IMINAR Y 5. Numeric Button s ( S tanda rd) Use these butt ons to enter numeric ch aracters (0 . .. 9), such as when chan ging remote con trol codes (refer to Remote Control on page 87).
System Overview 16 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 9. MENU Press this button t o access th e OSD controls, or to exit the c urrent menu and retur n to the previous one. 10. Cur s or Button s (, , , ) Use these buttons to select items or sett ings, adjust setti ngs or switch display patterns.
System Overview Runco SC-30d/SC-35d Insta llation/Operation Manual 17 PRE L IMINAR Y 14. 3D Mode Selection Buttons: 3D AUTO Press to set the 3D Mode to Auto . 3D SBS (Side-by-Side) Press to set the 3D Mode to 3D Side-by-Side . 3D T AB (T op-and -Bottom) Press to set the 3D Mode to 3D T o p-and- Bottom .
System Overview 18 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Note s :.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 19 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Press down the tab on the cover an d pull the cover in the dir ection of the ar row. 2. Insert the incl uded batter ies.
Installation 20 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a qu ick overview of the SC-3 0d/SC-35d installation process. The sections following this one provid e detailed instructions. Table 3-1.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 21 PRE L IMINAR Y 3.3 Installation Considerations Proper installation of you r projector will ensure the quality of yo ur display.
Installation 22 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Throw Distance Throw distance is the distanc e measured from the front of the projecto r to the screen.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 23 PRE L IMINAR Y Table 3-3 lists the available lens op tions for the SC-30d/SC-35 d and their associated throw ratios. Table 3-3. Len s Option s and Throw Ratio s Len s Option (Note 2) Throw Ratio with Primary Len s Only Throw Range in inche s , with 108 x 60.
Installation 24 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Vertical and Ho rizonta l Position Proper placem ent of the proje ctor relative t o the screen wil l yield a rectangu lar, perfectly-cen tered image that complet ely fills the scree n.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 25 PRE L IMINAR Y Figure 3-4. Horizontal Le n s S hift (EXAMPLE ONLY) 0% Screen Center 100% Width Lens Shift (1.0 x W) 50% Width Lens Shift (0.5 x W) Screen Width (W) Note: This is a general example of lens shift.
Installation 26 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Table 3-4 lists the lens shift limits for each available SC-30d/SC- 35d lens, as pe rcentages and absolu te measur ements with a 108 x 60.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 27 PRE L IMINAR Y Audio/Video Synchronization Issues Due to its extraordinarily high level of video processing pe rfo rmance, the Dim ension Digital Controller may distribute video signals with a pe rceptible level of audio latency.
Installation 28 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Other Considerations Other considerations and ti ps that can help i mprove your installati on: • Keep the ambient tem perature co nstant and below 35°C (95°F). Keep the projecto r away from he ating an d/or air con ditioning ven ts.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 29 PRE L IMINAR Y 6. Hold the le ns assembly with the mot or facing right (toward the Runco logo).
Installation 30 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3.5 Installing the Optional CineWide Lens Mount If you are in stalling a stan dard SC-30d/SC -35d (without a n anamorph ic lens), skip this step and procee d with Mounting the SC-30d/SC- 35d (page 34).
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 31 PRE L IMINAR Y Remove Projector F ront Feet: Place the projector upsid e down on a blanket or oth er soft surface. Use a Phillips screwdri ver to loosen the screws attaching th e two front feet to the projector .
Installation 32 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y In s tall Len s Motor: Position the AutoSco pe Lens Motor as shown in Fig ure 3-8. Line up the mounting h oles on the len s motor hous ing with those on the unde rside of the projector.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 33 PRE L IMINAR Y Installing the Fixed CineWide Base P late To install the fixed C ineWide base plate on a SC-30d/SC-35d /CineWide: 1. Place the proje ctor upside d own on a b lanket or o ther soft surfa ce.
Installation 34 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3.6 Mounting the SC-30d/SC-35d There are se veral method s for mountin g the projec tor. Dependin g on your ch osen installation, one method ma y be more suit able than ano ther.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 35 PRE L IMINAR Y 3.7 Mounting the Dimension Digital Controller The Dimension Di gital Control ler unit c an be plac ed on any fl at, stable su rface such as a shelf or table, or it can be rack-mounte d using the supp lied mountin g hardware.
Installation 36 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3.8 System Interconnections Proceed as follo ws to connect the SC-30d/SC-35d system component s to each other and to AC po wer. When connec ting your equip ment: • Turn off all eq uipment before making an y connections.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 37 PRE L IMINAR Y Figure 3-13 show s how to con nect the Dimensio n Digital Controller to the projector.
Installation 38 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Connecting an Audio Processor or Secondar y Display Device to the Dimension Digital Controller (Optional) The Dimensi.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 39 PRE L IMINAR Y Additional Connections to the Dimension Digital Controller (Optional) The Dimension Di gital Control ler provide s the.
Installation 40 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Connecting 12-volt Trigger Output s to External Equipment: If your SC-30d/SC-35d is equipped w ith an anam orphic le ns, connect the +12V T rigger Input on the lens transport to a 12-volt trig ger output on the Dimensio n Digital Controller; see Figure 3-16.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 41 PRE L IMINAR Y Connecting an External IR Receiver to th e Dimen s ion Digital Controller: If infrared signals from th e remote co ntr.
Installation 42 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Ethernet Network Connection: Use a standard, Cat egory 5 netw ork cable with an RJ-45 plug to connect a ne twork hub, r outer or ga teway to the Ethernet port on the Dimension Digita l Controlle r; see Figure 3-18.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 43 PRE L IMINAR Y Connecting Source Components to the Dimension Digital Controller Connect your video sources to the Dimens ion Digital Cont roller as sho wn and de scribed in the sections that follow.
Installation 44 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y HDMI S ource Connection s : See Figure 3-20. Figure 3-20. HDMI S ource Conn ection s Use the HDMI inpu ts whenever p ossible.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 45 PRE L IMINAR Y Compone nt Video S ource Connection s : Conn ect your componen t video sources to the HD1, HD2 a nd/or Compo nent/SCART input s as shown in Figure 3-21.
Installation 46 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y RGBHV S ource Connection s : Connect personal computer s and/or othe r RGB sources to the HD1 and/or HD2 inputs as shown in Figur e 3-22.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 47 PRE L IMINAR Y S CART RGB S S ource Connection s : Connect the gre en, blue a nd red ou tputs from your SCART source to the Comp onent/SCART input on the Dimensio n Digital Contro ller.
Installation 48 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Compo s ite S ource Connection s : Se e Figure 3-24 . Figure 3-24. Co mpo s ite Video S ource Connec tion s USB Video.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 49 PRE L IMINAR Y Connecting the Active 3D Emitter to the Dimension Digital Controller Connect the 3D S YNC IN port on th e emitter to the 3D S YNC conn ector on the Dimension Digital Controller, as shown in Figure 3-25.
Installation 50 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3.9 Turning on the Power 1. Power up your sour ce compo nents. 2. If this is an AutoScope-eq uipped proje ctor, turn on the main powe r switch at the r ear of the AutoSco pe lens motor.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 51 PRE L IMINAR Y 3.10 Primary Lens Adjustments: Focus, Zoom and Position Lens zoom an d focus are motorized ad justments th at are adju stable usin g the remo te control (Figure 2-6). This allows yo u to adjust the focus and ima ge size while at the screen for more ac curate re sults.
Installation 52 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 3.11 Adjusting the Picture Orientation By default, th e SC-30d/SC-35d is conf igured for a “floor/front” inst allation, in which the projector is installe d upright and in front of t he screen.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 53 PRE L IMINAR Y 3.12 Adjusting the Image Geometry Projector and /or screen p lacement — among other things — can cause geometric distortion in th e projected im age.
Installation 54 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y “Keystoning” usu ally occurs when the pro jector is tilted relative to the screen. “Pincus hion” distortion can so metimes occu r if the t hrow distance is very short an d/or the pro jector is equipped with a n anamorph ic lens.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 55 PRE L IMINAR Y 3.13 Installing and Adjusting the CineWide Anamorphic Lens If you are installing an SC-30d /SC-35d/CineWide or SC-30d /SC-35d/CineWide with AutoScope, pro ceed as follows to install and ad just the secon dary anamorph ic lens.
Installation 56 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Attach Len s Mounting A ss embly to Len s Motor Carriage P late: 1. Remove the tw o Yaw/X Adjustm ent Levers an d Washers ( 8 ) from the bottom of th e Anamorphic Lens Hold er ( 6 ).
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 57 PRE L IMINAR Y Configure Len s Motor Trigger on Dimen s ion Digital Controller: The anamorphic lens solutio n for the SC-30d /SC-35d maintai ns constant image height indepe ndent of t he aspect ratio, whil e using the full display resoluti on of the projector.
Installation 58 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Adju s ting the Height (Y): With the white field still on-screen , loosen the Height/Y Adjust ment T-Scre ws on either side o f the lens.
Installation Runco SC-30d/SC-35d Insta llation/Operation Manual 59 PRE L IMINAR Y Yaw Adju s t: Loosen the Y aw/X-Adjustment Levers to allow the len s to pivot freely from side to side.
Installation 60 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Note s :.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 61 PRE L IMINAR Y 4.1 Using the On-Screen Menus To display t he Main Me nu, press the MENU button o n the remote control or Dim ension Digital Controlle r front pane l (Figure 2-4 ).
Operation 62 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Figure 4-1. S C-30d/ S C-35d O S D Menu S tructur e (continued) S ervice Test Vide o Color Bars 1 Color Bars 2 Focus Grey Bars Full White Primary / Second ary / Dual Alignment 3D Input Names R ename/Restore Remote Contr ol Remote Code 00000 .
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 63 PRE L IMINAR Y Main Menu The Main Menu is the startin g point for accessing all Dimension Digital Controller functi ons. (You must enter a passcode to access the Ca libration and Service menus.
Operation 64 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Aspect Ratio To change the asp ect ratio (size and shape) of the proj ected image, select Aspect Ratio from the Main Menu and press ENTER . Select the appropri ate aspect rat io for your screen size and the t ype of program mate rial being viewed; refer t o Table 4-1.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 65 PRE L IMINAR Y Letterbox LET BOX Letterbox mode scales (zooms in on) a 4:3 image linearly (by the same amount on al l sides) to fill a 16:9 display. Letterbox is best suited for viewing LaserDisc movies or “full-screen” DVDs on a 16:9 screen.
Operation 66 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Screen The Screen Menu allows you to recall multiple sets of stored value s for certain controls (Output Shift, Image Alignment and Screen Masking) th at are saved for each a spect ratio.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 67 PRE L IMINAR Y Picture Use the controls in the Pict ure Menu to calibrat e each Dimension Dig ital Controller inp ut to achieve optimu m picture qu ality.
Operation 68 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Brightne ss : On your external te st pattern so urce, select a PLUGE pattern. (PLUGE is an acronym for “Pictur e Line-Up Generat ion Equipment.”) Figure 4-2 shows a typical PLUG E pattern.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 69 PRE L IMINAR Y Color S aturation: On your external tes t pattern source , select a c olor bar patter n like the one shown in F igure 4-4. Figure 4-4. Typical Color Bar Pattern for Adju s ting Color S aturation and Tint 1.
Operation 70 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 11.Adjust the color sa turation le vel until the outermost (gray and blue) colo r bars appear to be a single shade of blue : Tint: Tint or “hue” is esse ntially the ratio of red to gr een in the color port ion of the image.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 71 PRE L IMINAR Y S harpne ss : “Sharpness” is the a mount of hig h-frequency de tail in the ima ge. To adjust sharpness, select Sharpness from the Picture men u and press ENTER . On your external test pattern source, select a pattern like the one show n in Figure 4-5.
Operation 72 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Input Position Use the contro ls in the Input Po sition Menu to fine-tun e the aspect ra tio and image position for the current source. Left/Right: Select Left/Right from the Input Positio n menu to sh ift the project ed image horizontally.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 73 PRE L IMINAR Y Figure 4-6. Over s can Mode s Pha s e (RGB, Component or S CART s ource s ): This control adju sts the phase of the pixel sampling cloc k relative to the in coming signal.
Operation 74 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Memory Presets For each input , the Dimension Digital Contro ll er lets you save imag e quality settings as presets that you can recall at a later time . You can create up to four presets per input and display mode (resolution and frame rate).
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 75 PRE L IMINAR Y To reset the Cu stom 1 or Cu stom 2 mem ory preset t o its factory-defa ult state, sele ct it, press or to highlight Re set and press ENTER .
Operation 76 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Sleep Timer Select Sleep Timer from the Main Me nu to turn off the SC-30d/S C-35d after a specified interval. Press or to select Of f, 30 Minut es, 60 Minute s, 90 Minutes, 2 Hours or 4 Hours.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 77 PRE L IMINAR Y Calibration Use the Calibrat ion menu to p erform advanc ed picture qua lity adjustments.
Operation 78 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y • Color Temp: Select Color Temp from the Display Colo r - Common Settings menu to adjust the co lor temper ature. Co lor temper ature esta blishes the “colo r of gray” by adjusting th e 75% white point to vario us color po ints.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 79 PRE L IMINAR Y Table 4-2 lists the x- and y-coordina tes for each color temperatur e preset in “Simple” mode. • Color Gamut: Select Color Gamut from the Display Color - Common Settings men u to select a color gam ut (range) that may be diffe rent from the defau lt color gamut.
Operation 80 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Table 4-3 lists th e Color Gamu t settings and associated x- and y-co ordinates for each primary and secondary co lor compon ent.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 81 PRE L IMINAR Y The Auto Color Enable and Te s t Patt ern E nable che ckboxes let you cho ose what to display on-scree n while making t hese adjustment s.
Operation 82 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y •C o n s tantContra s t ( S C-30d only): Select ConstantCo ntrast from the Display Co lor - Projector Setting s menu to enable ( On ) or disable ( Of f ) ConstantCont rast in the optical engine.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 83 PRE L IMINAR Y Copy/Pa s te - Memory Pre s et: You can copy and paste settings from on e memory preset to an other. Th is gives you a convenient starting point for creating a new pres et based on an existing one , to make the calibration pr ocess less tim e-consuming.
Operation 84 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y •A s pect Ratio - Pa s te S etting s : To apply the Output Shift, Image Alignment a nd Screen Masking se ttings on the.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 85 PRE L IMINAR Y • S pla s h Enable: When you have fin ished custom izing the splash sc reen, select Splash Enable from th e Splash Con figure menu.
Operation 86 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y Press MENU to exit test pattern mode. Grey Bar s Use this pattern when making brightness, contrast or white balance (gai n/offs et) adjustments. Full White Use this pattern when measuring or adjusting brightness, contrast or white balance (gain/offset).
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 87 PRE L IMINAR Y Input Name s : You can give each input a descriptive nam e. For examp le, you may wan t to change th e default input name to the type of source compo nent connec ted to it: “VCR,” “DVD,” “Laptop” et c etera.
Operation 88 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y When you change th e Remote Code on the Dimensio n Digital Controlle r, you must re-program th e Dimension Digi tal Controlle r remote cont rol to send that same co de.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 89 PRE L IMINAR Y To change a but ton assignment, select the co rresponding entr y in the SRC 1-7 Keys o r SRC 8-14 Keys sub-m enu. Then, c hoose the sour ce input you w ish to assign to that button.
Operation 90 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y •D i s play 3D S etting s : The Display 3D Settings me nu is not applicab le to the SC-30d/SC-35d.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 91 PRE L IMINAR Y • Default Gateway: Select Defau lt Gateway fr om the IP Conf iguration m enu to manually config ure the defau lt IP gateway. Th e procedure is similar to that for setting the IP address.
Operation 92 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y • E-Mail Notification: Select E-Mail Notification from th e Network me nu to specify when and to whom the Dime nsion Digital Controller send s error and ser vice notification messages via e-mail.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 93 PRE L IMINAR Y • Periodic S ervice Notification: You can have the Dimen sion Digital Controller send periodic rem inders via e-mail to perform re gular mainten ance tasks. To do this: 1.
Operation 94 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y • Remote Network Control: Select Remote Network Control from the N etwork menu to enable or d isable control o f the Dimension Digit al Controller via a n IP connectio n (typically usin g a web brows er).
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 95 PRE L IMINAR Y Mi s cellaneou s : Select Miscellaneou s from the Service men u to set the following optio ns: • Langu age: Select Lang.
Operation 96 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y HDMI: Select H DMI from the Service menu to set the follow ing options affecting communication between HDMI sources, the D imension Digital Con troller and the SC-30d/SC-35d.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 97 PRE L IMINAR Y • Logo LED: Select Logo LED fr om the Fron t Panel Bright ness menu to adjust the brightness of the larg e, illuminated logo on the left side of the display. The ra nge is from 0 (off) to 31.
Operation 98 Runco SC-30d/SC-35d Inst allation/Ope ration Manual PRE L IMINAR Y 4.2 Using the 3D Glasses The 3D LCD Shutter Glasses f unction with the Ru nco Active3D Emitter and th e projector to provide unsurpassed 3D st ereosco pic viewing. T his section desc ribes the featu res, connection, setup and op eration of the 3D L CD Shutter G lasses.
Operation Runco SC-30d/SC-35d Insta llation/Operation Manual 99 PRE L IMINAR Y Charging the Batt ery The glasses must be fully ch arged before first use and whenever the Battery Stat us LED flashes red once every couple of seconds. The glasses will charge a completely dead battery in ap proximately five ho urs.
Operation 100 Runco SC-30d/SC-35d Inst allation/Operation M anual PRE L IMINAR Y Turning On the Glasses 1. Ensure that the projec tor is powere d on and displaying 3D content. 2. Press and hold the Po wer Button for ab out two second s, then release the b utton.
Maintenance and Troubleshooting Runco SC-30d/SC-35d Insta llation/Operation Manual 101 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be repl aced when it reaches th e end of its lif e (typically bet ween 2,000 and 3,000 hour s depending on the L amp Power settin g), or sooner if a notice able degradation in brigh tness occurs.
Maintenance and Troublesh ooting 102 Runco SC-30d/SC-35d Inst allation/Operation M anual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guideline s for troubleshooting pr oblems you may encounter with the SC-30d/S C-35d.
Maintenance and Troubleshooting Runco SC-30d/SC-35d Insta llation/Operation Manual 103 PRE L IMINAR Y The display is jittery or unstable. • Poor-quality or improperly connected source. • The horizontal or vertical scan frequency of the input signal may be out of range for the projector.
Maintenance and Troublesh ooting 104 Runco SC-30d/SC-35d Inst allation/Operation M anual PRE L IMINAR Y The projector does not turn on or respond to user com- mands.
Runco SC-30d/SC-35d Insta llation/Operation Manual 105 PRE L IMINAR Y In addition to using the Dimension Digital Controller fron t-panel keypa d or remote control unit, there are three metho ds of con.
External Control 106 Runco SC-30d/SC-35d Inst allation/Operation M anual PRE L IMINAR Y Command Format Commands sent from an aut omation/con trol system or PC to the Dimen sion Digital Controller must have t he following f ormat: (www:xyz) [CR] Where: • ( and ) indicate the star t and end o f the comma nd data.
External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 107 PRE L IMINAR Y • 11 = Password not entered • www indicates the comma nd code. This field is case in sensitive; for example, PWR , pwr and PwR are a ll equivalent. • :x is the destinatio n paramete r.
External Control 108 Runco SC-30d/SC-35d Inst allation/Operation M anual PRE L IMINAR Y Apply Image Alignment Values AIA R/W No 0 1 No 0 = Off; 1 = On Altitude ALT R/W No 0 1 No 0 = Auto 1 = High Adva.
External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 109 PRE L IMINAR Y ConstantCo ntrast (SC-30d only) CCT R/W No 0 4 No 0 = Off 1 = On 2 = Low 3 = Medium 4 = High CEC Enable CEC R/W N.
External Control 110 Runco SC-30d/SC-35d Inst allation/Operation M anual PRE L IMINAR Y Diagnostic Color DGC R/W No 0 6 No 0 = White 1 = Red 2 = Green 3 = Blue 4 = Yellow 5 = Cyan 6 = Magenta Display .
External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 111 PRE L IMINAR Y 24Hz 3D Mode FRC R/W No 1 2 No 1 = 120Hz 6:4 2 = 120Hz 5:5 Firmware Upgrade FWU W No N/A N/A No Action will be pe.
External Control 112 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Information Current Color Space ICC R No 0 3 Yes 0 = REC601 1 = REC709 2 = RGB 3 = RGB Video Information Copied.
External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 113 PRE L IMINAR Y Input Position Left Right IPL R/W Yes -50 50 No Input Position Up Down IP U R/W Yes -50 50 No Input Position Width IPW R/W Yes 0 50 No Input Red Gain IRG R/W Yes -32 32 No Input Red Offset IRO R/W Yes -32 32 No Internal 3D Sync Delay ISD R/W Yes Var.
External Control 114 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Remote Key KEY W No 0 85 No 1 = On 2 = Off 3 = Menu 4 = Enter 5 = Up 6 = Down 7 = Left 8 = Right 9 = 16:9 10 = .
External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 115 PRE L IMINAR Y Remote Key Repeat (cont.) KRT W No 0 85 No 64 = Keypad Menu (used internally) 65 = Power Toggle (used internally).
External Control 116 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Display Serial Number LSN R No N/A N/A Yes Model Name MDL R No N/A N/A Yes Memory Preset MMP R/W No 0 3 No 0 = .
External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 117 PRE L IMINAR Y Programmable Source Key [1 ... 14] P01 P02 P03 P04 P05 P06 P07 P08 P09 P10 P11 P12 P13 P14 R/W No 0 15 No 0 = Com.
External Control 118 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Input Name 1 Restore R01 W No N/A N/A No Action will be performed on any setting value Input Name 2 Restore R02.
External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 119 PRE L IMINAR Y Screen Masking Left SML R/W Yes 0 200 N o Screen Masking Test Pattern Mode Enable SMM R/W No 0 1 No 0 = Off; 1 = .
External Control 120 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Trigger 1 16:9 T11 R/W No 0 1 No 0 = Off; 1 = On Trigger 1 4: 3 T12 R/W No 0 1 No Trigger 1 Letterbox T13 R/W N.
External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 121 PRE L IMINAR Y Test Pattern Enable TPE R/W No 0 1 No 0 = Off; 1 = On Primary Test Pattern TPP R/W No 0 1 N o 0 = Off; 1 = On Sec.
External Control 122 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y 6.2 Using Discrete IR Codes The Dimension Digital Contr oller accepts comm ands in the form of IR signals that con form to the NEC protocol . Each Dimension Digi tal Controller remo te control b utton has an NEC control code a ssociated with it .
External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 123 PRE L IMINAR Y IR Command List (Standa rd Mode) Table 6-2 lists th e NEC contro l codes for th e Dimension Digi tal Controller.
External Control 124 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Right 8209 29 0x20111DE2 Right-Arrow ( ) Down 8209 30 0x20111EE1 Down-Arrow ( ) Left 82 09 31 0x2 0111FE0 Left-.
External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 125 PRE L IMINAR Y COMP 8209 72 0x20114 8B7 Component video input HD 1 820 9 73 0x20114 9B6 HD1 video input HD 2 820 9 74 0x20114 AB.
External Control 126 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y IR Command List (Extended Mode) Table 6-3 lists the Extended-mode NEC co ntrol codes for the Dimension Digital Controller. To use the remote co ntrol unit in extended mode, s et the addre ss code to 88999 (refer to Remote Control on page 87).
External Control Runco SC-30d/SC-35d Insta llation/Operation Manual 127 PRE L IMINAR Y 6.3 Using HDMI CEC Messages The Dimension Digita l Controller accep ts and can respond to CEC command messages from a disc player, satellite receiver or DVR/set- top box via an HDMI connection.
External Control 128 Runco SC-30d/SC-35d Inst all ation/Operation M anual PRE L IMINAR Y Set Menu Language 0x3 2 – √ Give Physical Address 0x83 – √ Set Stream Path 0x86 – √ Get CEC Version.
Specifications Runco SC-30d/SC-35d Insta llation/Operation Manual 129 PRE L IMINAR Y 7.1 SC-30d/SC-35d Projector Specifications Table 7-1 lists the SC-30d/SC- 35d proje ctor spec ifications.
Specifications 130 Runco SC-30d/SC-35d Inst all ation/Operation M anual P RELI M INARY Brightne ss and Contra s t (2D): Cinema S tandard s Mea s urement S y s tem (C S M S ) S pecification s - S C-30d.
Specifications Runco SC-30d/SC-35d Insta llation/Operation Manual 131 PRE L IMINAR Y Refre s h Rate: 50 Hz or 60 Hz (2D content) 100 Hz or 120 Hz (3D content) 3D Technology: Frame sequential, active shutter Dimen s ion s : See Figure 7-1 Weight (without len s ): 61.
Specifications 132 Runco SC-30d/SC-35d Inst all ation/Operation M anual P RELI M INARY 7.2 Dimension Digital Controller Specifications Table 7-2 lists the Dimension Digit al Controller sp ecifications.
Specifications Runco SC-30d/SC-35d Insta llation/Operation Manual 133 PRE L IMINAR Y Dimen s ion s : Width = 17.50 inches (444.5 mm) Depth = 17.68 inches (449.
Specifications 134 Runco SC-30d/SC-35d Inst all ation/Operation M anual P RELI M INARY 7.3 Supported Timings Table 7-3 lists the s ignal types su pported by each input on the Dimension Digita l Controller .
Specifications Runco SC-30d/SC-35d Insta llation/Operation Manual 135 PRE L IMINAR Y S upported 3D Mod e s (continued) 1080p TAB (Top-and- Bottom) 1920x1080 23.98 26.978 74.175 – √ – – – – 24.00 27.000 74.250 – √ – – – – 29.97 33.
Specifications 136 Runco SC-30d/SC-35d Inst all ation/Operation M anual P RELI M INARY S upported 2D Mod e s (continued) 1152x864 1152x864 75.00 67.50 0 108.000 √√√√ – – 1280x720 1280x720 47.95 37.83 3 64.769 √√√√ – – 1280x768 1280x768 60.
Specifications Runco SC-30d/SC-35d Insta llation/Operation Manual 137 PRE L IMINAR Y S upported 2D Mod e s (continued) SCART RGBS – 50.00 – – –––– √ – 480/60i 720x487 59.94 15.734 13.500 √√√√ – – 480/60p 720x483 59.94 31.
Specifications 138 Runco SC-30d/SC-35d Inst all ation/Operation M anual P RELI M INARY 7.4 SC-30d/SC-35d Dimensions Figure 7-1 shows the SC-30d/SC- 35d dimensions, in inch es. Figure 7-1. S C-30d/ S C-35d Dimen s ion s 0 X 2 2 7 8 . 9 0 0 0 . 1 2 0 4.
.
Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com 020-1205-00 Rev. A September 20 12.
An important point after buying a device Runco SC-30d (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Runco SC-30d yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Runco SC-30d - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Runco SC-30d you will learn all the available features of the product, as well as information on its operation. The information that you get Runco SC-30d will certainly help you make a decision on the purchase.
If you already are a holder of Runco SC-30d, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Runco SC-30d.
However, one of the most important roles played by the user manual is to help in solving problems with Runco SC-30d. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Runco SC-30d along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center