Instruction/ maintenance manual of the product LS-10I Runco
Go to page of 112
LS-10i DLP TM Home Theater Projector I NSTALLATION /O PERATION M ANUAL.
.
Runco LS-10i Installation/Operation Manual iii PRE L IMINAR Y RuncoCare™ Standard Two Year Limited Warranty Congratulations o n your purchase of a Runco® product ! With proper installation, se tup and care, you should enjoy many yea rs of unpara lleled video p erformance.
iv Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y In the event o f a product de fect, please fo llow the warra nty claim proc edure provided b elow: 1. The Custome r is required to contact a Runco dealer or Runco Te chnical Suppor t via email at sup port@runco.
Runco LS-10i Installati on/Operation Manual v PRE L IMINAR Y h Expected lam p degradation and normal decrease in lamp output o ver a period of time or a s the lamp is co nsumed i Customer caused defec.
vi Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Please visit http:// www.runco.c om/support /product-r egistration/ to r egister prod uct.
Runco LS-10i Installati on/Operation Manual vii PRE L IMINAR Y Thank you for you r purchase of this qu ality Runco video produ ct! It has been designed to provide you with the qua lity of video that is exp ected in a home theat er. For the be st performan ce, please read this m anual carefully a s it is your gu ide through the menus and operat ion.
viii Runco LS-10i Instal lation/Operation Manual PRE L IMINAR Y 19. Never look directly into t he lens when the lamp is on. Manufacturer’s Name: Runco International, LL C Manufacture r’s Address: .
Runco LS-10i Installation/Operation Manual ix PRE L IMINAR Y NOTE: This equipment has b een tested a nd found to comply with th e limits for a C lass B digital device, pursua nt to Part 15 o f the FCC Rules. T hese limits ar e designed to p rovide reasonab le protection ag ainst harmful inter ference in a resid ential installation.
x Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Notes:.
Runco LS-10i Installati on/Operation Manual xi 1 Table of Contents PRE L IMINAR Y RuncoCare™ Standa rd Two Year Limited Warran ty ........ ................... ................. ....... iii Important Safety Ins tructions ...... ................. ....
Table of Contents xii Runco LS-10i Instal lation/Operation Manual PRE L IMINAR Y Mounting the LS-1 0i ..... ................. ................ ............. ................ ................ ................ 27 Floor Mount ing (Upright) ............. .
Table of Contents Runco LS-10i Installation /Operation Manu al xiii PRE L IMINAR Y 5. Maintenance an d Troubleshooting . ................ ................ .................... ................ ... 71 Lamp Repla cement ... ................ ............
Table of Contents xiv Runco LS-10i Instal lation/Operation Manual PRE L IMINAR Y Notes:.
Runco LS-10i Installati on/Operation Manual xv 1 List of Figures PRE L IMINAR Y 2-1. LS-10i Fron t/Side View . ................. ............. ................ ................ ................ ................ .. 5 2-2. LS-10i Rear/Bottom/ Top View .
List of Figures xvi Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y 4-16. PIP Split-Scre en Mode ......... ................ ................ ................. ................ ................ ... 65 4-17. LS-10i Con trol Menu ............ .
Introd uction Runco LS-10i Installati on/Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s M anual describe s how to install, set up and ope rate the Runc o LS-10i Digital Light Processing ( DLP™) Projector.
Introduc tion 2 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Graphic Convention s: These sym bols appear in n umerous plac es throughout the manual, to emp hasize points th at you must k eep in mind to a void problems wit h your equipment o r injury: 1.
Introd uction Runco LS-10i Installati on/Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits The LightStyle™ Series LS-10i Home Theater Projector enc ompasses Runco’s award-winning t hree-chip perform ance in an e legant, sleek pa ckage.
Introduc tion 4 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Key Features and Benefits The LS-10i offers these key fea tures and benefits: • Native Resolution: 1920 x 108 0 (16:9 Nativ.
Controls and Functi ons Runco LS-10i Installati on/Operation Manual 5 PRE L IMINAR Y 2.1 LS-10i at a Glance Figure 2-1 and Figure 2-2 show the key LS-10i compon ents. Figure 2-1 . LS-10i Front/Side V iew • TOP IR SENSOR Receives infrare d signals from the remot e control unit.
Controls and Functions 6 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y • POWER BUTTON/ST A TUS LED Indicates proj ector status as foll ows: • Solid green = AC power present, ready to .
Controls and Functi ons Runco LS-10i Installati on/Operation Manual 7 PRE L IMINAR Y Figure 2- 2. LS-10i Rear/Botto m/Top Vie w • RUNCO LOGO BA DGE • REAR COVER Remove to acce ss connectors . • LAMP MODULE COVER Remove this cover to acce ss the lamp compartment .
Controls and Functions 8 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y 2.2 LS-10i Rear Panel Figure 2-3 sh ows the LS-10i rea r panel. Figure 2-3. LS-10i Rea r Panel 1. HDMI 1 (Digital) HDMI 2 (Digital) HDCP-compliant digital video inputs for connecting an HDMI or DVI so urce.
Controls and Functi ons Runco LS-10i Installati on/Operation Manual 9 PRE L IMINAR Y 9. TRIGGER 2 (3.5-mm, mini phono jack) Provides 12 (+/- 1. 5) volt switched output for an anamorphi c lens transport (if installed) or scr een relays with 2 50mA current capacity and s hort protec tion.
Controls and Functions 10 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y 4. INFO Press to display inpu t signal and product informat ion. Cursor Keys ( , , , ) Use these buttons to select items or sett ings, adjust settings or switch display patterns.
Controls and Functi ons Runco LS-10i Installati on/Operation Manual 11 PRE L IMINAR Y 7. Aspect Ratio Selection Bu ttons Use these buttons to sele ct an aspect rati o directly, as follow s: 16:9 For viewing 16 :9 DVDs or HDTV p rograms in th eir native aspe ct ratio.
Controls and Functions 12 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Notes:.
Installation Runco LS-10i Installati on/Operation Manual 13 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Slide the battery compart ment cover in the direction of the arrow to re move it. 2. Install two AAA batteries with the correct po larity.
Installation 14 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y • The projector’ s front IR receiver has a rang e of approximately 40 feet (12.19 mete rs); the top IR re ceiver has a range of ap proximately 20 feet (6.1 0 meters). Figure 3-1 shows the rec eption angles of the front an d top IR rece ivers.
Installation Runco LS-10i Installati on/Operation Manual 15 PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick overview of the LS-1 0i installation process. The section s following this one prov ide detail ed instruc tions. Installation shou ld be performed by a quali fied custom video installation specialist.
Installation 16 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y 3.3 Installation Considerations Proper insta llation of your p rojector will e nsure the qu ality of your display.
Installation Runco LS-10i Installati on/Operation Manual 17 PRE L IMINAR Y Ambient Light In general, minimize or eliminat e light so urces directed at the screen . Contrast ratio in your images will be noticeably reduc ed if light directly st rikes the screen, such as when a sh aft of light from a window o r floodlight falls on the image.
Installation 18 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Table 3-3 lists the available LS-10i Series lens optio ns and their a ssociated throw ratios. Table 3-3. LS-10i Lens Options and Throw Ratios (Note 1) Lens Option Throw Ratio with Primary Lens Only Throw Range in inches, with 96x54-inch (1.
Installation Runco LS-10i Installati on/Operation Manual 19 PRE L IMINAR Y Vertical and Horizontal Position Proper placement of the projector relative to the screen will yield a rectangular , perfectly-centered image that completely fills the screen.
Installation 20 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Figure 3-5. Horizontal Lens Shift (Example Only) Vertical Lens Shift: The LS-10i zoom len ses (Proteus 2 thro ugh 6) provide up to 65% of vertical lens shift in either directio n (up or down ).
Installation Runco LS-10i Installati on/Operation Manual 21 PRE L IMINAR Y Folded Optics In rear-screen applications where space behind the projector is lim ited, a mirror may be used to fold th e optical path , as shown in Figure 3-6. The position of the projecto r and mirror must be accurate ly set.
Installation 22 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y • Transport Ass embly Attachment Plate • Attachment plate hard ware (screws, washers and spacers) • Attachment plate se.
Installation Runco LS-10i Installati on/Operation Manual 23 PRE L IMINAR Y 2. Position the atta chment pl ate as shown h ere. 3. If you are mounting the pr ojector on a ceiling: Line up the holes on the Ceiling Mount Plate (included with the projector ceilin g mount kit) with those on the bottom of the projecto r and attach ment plate .
Installation 24 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y 1. Do not use the mounting screws pr ovided with the ceiling mounting kit. Use only the hardware provided with the Tra nsport Assembly Attachmen t plate. 2. DO NOT OVER-TIGHTEN THE SCREWS.
Installation Runco LS-10i Installati on/Operation Manual 25 PRE L IMINAR Y Installing the Anamorphic Lens Transport Assembly: After installing the Transport Assembly Attachment Plate and Ceiling Mount Plate, proceed as follows to install the Anamorphic Le ns Transport Assemb ly.
Installation 26 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Attaching the Secur ity Hooks: To help stabilize and support the added weig ht of the Anamorphic Lens and Le ns Transpor t Assembly, the a ttachment p late includes two security hooks and rela ted hardwar e for attach ing the front part of the p late to the ceiling above.
Installation Runco LS-10i Installati on/Operation Manual 27 PRE L IMINAR Y 3.5 Mounting the LS-10i There are se veral methods fo r mounting t he projector.
Installation 28 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Adjusting the Projection Angle If the LS-10i is ceiling-mounted and the screen is significantly lower than the projector, you can tilt the pr ojector at a slight angle b y adjusting the ceiling moun t.
Installation Runco LS-10i Installati on/Operation Manual 29 PRE L IMINAR Y 3.6 Connections to the LS-10i Proceed as foll ows to connect the LS- 10i to your video source s, external controlle r(s) – if present – and AC power. When connect ing your equipmen t: • Use the corr ect signal cables for each sour ce.
Installation 30 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Connecting Source Components to the LS-10i Connect your vid eo sources to t he LS-10i as show n and described in the section s that follow. HDMI/DVI Connections: Se e Figure 3-8.
Installation Runco LS-10i Installati on/Operation Manual 31 PRE L IMINAR Y RGBHV Connections: Conn ect your pers onal computer or other RGB source to the RGB input.
Installation 32 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y SCART RGB Connections: If the source o utputs RGB with co mposite sync, connect the green, b lue and red outputs to the Y, Pb and Pr ter minals on the COMPONENT 1/SCART input and the sync ou tput to the VIDEO input.
Installation Runco LS-10i Installati on/Operation Manual 33 PRE L IMINAR Y Compone nt Video Conn ections: Connect your c omponent video sources to the COMPONENT 1/SCART , COMPONENT 2 or RGB inputs as sh own in F igure 3-11.
Installation 34 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Composite/S-Video Connections: Connect your Compos ite and S-Video so urces to the LS-10i as shown in Fig ure 3-12.
Installation Runco LS-10i Installati on/Operation Manual 35 PRE L IMINAR Y RS-232 Controller Connection Connect a PC o r home theate r control/au tomation syste m (if present) t o the RS-232 por t on the LS-10i; see Figure 3-13. U se a standard, 9-pin se rial cable, wired straig ht-through .
Installation 36 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Connecting 12-Volt Trigger Output to External Theater Equipment If your home th eater contain s a retractab le screen, screen mask o r other 12-volt trigger-act ivated equipme nt, connect it to the 12 -volt trigger outp ut(s) as shown in Figure 3-14.
Installation Runco LS-10i Installati on/Operation Manual 37 PRE L IMINAR Y Connecting an External IR Receiver If infrare d signals from th e remote cont rol cannot reac h the project or due to excessi.
Installation 38 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y 3.7 Turning on the Power 1. Turn on your sour ce component s. 2. Press the ON button o n the remote control to turn on the LS-10i. The L ED flashes green to indi cate that it is w arming up.
Installation Runco LS-10i Installati on/Operation Manual 39 PRE L IMINAR Y 3.9 Changing the OSD Language When you turn on the LS-10i f or the first tim e, the OSD La nguage Menu appears. The LS-10i can display the men us in English, Fren ch, German, Ita lian, Spanish, Sw edish, Portuguese or R ussian.
Installation 40 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y 3.11 Installing and Adjusting the Anamorphic Lens If you are in stalling an LS-10 i with an an amorphic lens, proceed as fo llows to install a nd adjust the lens.
Installation Runco LS-10i Installati on/Operation Manual 41 PRE L IMINAR Y 7. Select the Cinema aspect rati o to move the anam orphic lens into posit ion, if it isn’t already. To d o this, pre ss CINEMA on the LS-10 i remote contr ol (refer to LS-10i Remote Control on page 9).
Installation 42 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Notes:.
Operation Runco LS-10i Installati on/Operation Manual 43 PRE L IMINAR Y 4.1 Selecting An Input Source When you turn on the LS-10i, it switches to the last selected input and lo oks for a valid signal. Use these butt ons on the rem ote control to sele ct an input source directly.
Operation 44 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y 4.4 Using Picture-In-Picture (PIP) For PIP purpos es, there are th ree groups of inputs se parated by t heir display mod es: • Video (SD) group: Video, S-Video an d SCART inputs.
Operation Runco LS-10i Installati on/Operation Manual 45 PRE L IMINAR Y 4.5 Using the On-Screen Menus 1. Press the MENU button on the remote control or system keypad to display the Main Menu. 2. There are six menus. Pres s or to se lect a sub-menu . 3.
Operation 46 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Main The LS-10i Main Menu, shown in Figure 4-2, provides access to the m ost commonly-used pr ojector functions.
Operation Runco LS-10i Installati on/Operation Manual 47 PRE L IMINAR Y Aspect Ratio: To change the aspect r atio (size and shap e) of the proje cted image, pr ess or to h ighlight Aspect Ratio.
Operation 48 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y 4:3 4:3 linearly scales the source active ima ge horizontally and vertically to fill a 4:3 rectangle which is centered and the same height as th e 16:9 designated image area. The remaining area is black.
Operation Runco LS-10i Installati on/Operation Manual 49 PRE L IMINAR Y Cinema Select Cinema to view 2.35 source material in its native aspect ratio. With a 16:9 screen and a standard LS-10i (without an anamorphic lens), the upper and lower portions of the screen are masked, but the geometry of the active image area is unchanged.
Operation 50 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Memory: Select Memory fr om the Main menu , then press ENTER to re call image qualit y settings previously sa ved, or to s ave changed settings in any of fo ur memory loc ations.
Operation Runco LS-10i Installati on/Operation Manual 51 PRE L IMINAR Y Brightness: On your external test pattern sour ce, select a PLUG E pattern. (PLUG E is an acronym for “Picture Line-Up Generation Equipme nt.”) Figure 4-3 shows a typical PLUG E pattern.
Operation 52 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Color: To adjust the o verall color inte nsity, sele ct Color from the Ma in menu. Decrease this setting if colors are overly satu rated; increase it if colors appear m uted or washed ou t.
Operation Runco LS-10i Installati on/Operation Manual 53 PRE L IMINAR Y Overscan: Some television prog rams are produced based on the assumption th at older television sets may not displa y the out er edges of t he broadcas t picture are a. Overscan effectively hide s these inactive, outer edges o f the image .
Operation 54 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Figure 4-7. Input Select Sub-Menu PIP Select: To select a PIP (se condary) video source, press or to highlight PIP Select, then p ress ENTER .
Operation Runco LS-10i Installati on/Operation Manual 55 PRE L IMINAR Y Advanced Use the contro ls in the Advan ced menu, sho wn in Figure 4- 8, to perform advanced ima ge adjustments.
Operation 56 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Video Standard: Select Video Standard fr om the Adv anced menu to specify the color system for composit e video or S-Video input signals. Different coun tries use differen t formats for vid eo signals.
Operation Runco LS-10i Installati on/Operation Manual 57 PRE L IMINAR Y Color Gamut: Select Color Gamut fr om the Advanced men u to select a color gamut (range) that may be differe nt from the default color gamut.
Operation 58 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y RGB Adjust: To remove any trace of c olor from the white a reas of the p rojected im age, choose RGB Adju st from the Advan ced menu and p ress ENTER . This displays the RGB Adjust sub-menu, shown in Figure 4-9.
Operation Runco LS-10i Installati on/Operation Manual 59 PRE L IMINAR Y Fine Sync: To fine-tune the p osition and o ther image attributes, choose Fine Sy nc from the Advanced m enu and press ENTER . This di splays the Fine Sy nc sub-menu , shown in Figure 4-10.
Operation 60 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y • Tracking (RGB or Component sources) : Tracking determ ines the freque ncy of the pixel sampling cloc k, indicated by the number of incomin g pixels per line, so th at all pixels generate d by a partic ular source are sampled.
Operation Runco LS-10i Installati on/Operation Manual 61 PRE L IMINAR Y PCE provides the ability to def ine a custom c olor gamut in terms of a “wh ite point” an d primary (red , green, blue) an d secondar y (yellow, cyan, m agenta) color p oints.
Operation 62 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y System Use the controls in the System m enu, shown in F igure 4-13 , to adjust the lam p, change the display orient ation and perform oth er, common installati on tasks. Figure 4-13.
Operation Runco LS-10i Installati on/Operation Manual 63 PRE L IMINAR Y Input Enable: To enable or d isable selection o f a source, c hoose Input Enab le from the System menu and press ENTER . This displays the Input En able su b-menu, shown in Figure 4-14.
Operation 64 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y PIP Position: To change the position of the PIP ima ge, choose PIP Position from the System menu; see Figure 4-15. Choose one o f the following: • Top Left : This places the PIP source into a 6 44x362 designated image area at the top left of the scr een.
Operation Runco LS-10i Installati on/Operation Manual 65 PRE L IMINAR Y Figure 4-16. PIP Split-Screen Mode Menu Position: Select Menu Positio n from the Sy stem menu to change the OSD menu position.
Operation 66 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Control Select Contro l from the Main Menu to set var ious options related t o control of the projector . Figure 4-17. LS-10i Control Menu Lens Control: Select Lens Con trol from the Co ntrol menu to perform le ns adjustmen ts (focus, zoom and lens shift).
Operation Runco LS-10i Installati on/Operation Manual 67 PRE L IMINAR Y Trigger 1: Select Trigger 1 from the Control me nu to specify w hen the Trigge r 1 port outputs 12 volts. Th ere is a three-seco nd delay before activati on to prevent oper ation while select ing an aspe ct ratio.
Operation 68 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Service Access the Service M enu, shown in Figure 4-18, to view information that u niquely identifies your p rojector and ind ic.
Operation Runco LS-10i Installati on/Operation Manual 69 PRE L IMINAR Y Lamp Hour Reset: When you replace th e projector lamp (refer to Lamp Replacement on page 71 ), you should also reset the lamp hour counter. To do this, sele ct Lamp Hou r Reset from th e Service menu, th en press ENTER .
Operation 70 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y To turn test patterns off, p ress any key ot her than or on the rem ote control unit or built-in keypad. Altitude: Select Altitude from the Servic e Menu to control the o peration of the projec tor’s cooling fan.
Maintenance and Troubleshooting Runco LS-10i Installati on/Operation Manual 71 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be replac ed when it rea ches the end of its life (typ ically between 2000 and 4000 h ours depend ing on the Lam p Power setting ), or soone r if a noticeab le degradation in brightness occur s.
Maintenance and Troublesho oting 72 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guidelines for tr oubleshooting proble ms you may encounter w ith the LS-1 0i.
Maintenance and Troubleshooting Runco LS-10i Installati on/Operation Manual 73 PRE L IMINAR Y Image appears “washed out” and/or dark areas appear too bright. • Brightness is set too high. • Lower the brightness setting. Colors in the image are swapped; for example, reds appear blue or vice versa.
Maintenance and Troublesho oting 74 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Notes:.
External Control Runco LS-10i Installati on/Operation Manual 75 PRE L IMINAR Y In addition to using the LS-10i r emote contro l unit, there a re three met hods of contro lling the projecto r externally: • Using a serial (R S-232) link to sen d ASC II commands and receive responses to those commands.
External Control 76 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Key Commands: The syntax for key commands is simple: ky <keyname>[CR] Some key command exam ples: ky menu[CR] Bring up o r cancel menu d isplay. ky mem.sw[CR] Switch to next user memor y.
External Control Runco LS-10i Installati on/Operation Manual 77 PRE L IMINAR Y 0x1d cur.down Keypad down arrow. 0x44 cur.up Keypad up arrow. 0x1c cur.left Keypad left arrow. 0x48 cur.righ Keypad right arrow. 0x06 bright Bring up or cancel brightness slider.
External Control 78 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y 0x08 1 Used to enter numeric characters. 0x0c 2 0x0d 3 0x0e 4 0x0f 5 0x14 6 0x15 7 0x16 8 0x17 9 0x18 0 0x12 focus Bring up or cancel focus menu. 0x10 zoom Bring up or cancel zoom menu.
External Control Runco LS-10i Installati on/Operation Manual 79 PRE L IMINAR Y Operations Commands: Operations co mmands allo w more flexib le and direct control of the projecto r. The syntax for operations commands is as fo llows: op <operation> <command>[CR] (Precede <operation> an d <command> with a space.
External Control 80 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y The last three co mmands show w hat happens when a control is grayed out. In this case, the sharpness mode was set to advanced (value = 1) and then the simple sharpn ess slider was attempte d to be adju sted and querie d.
External Control Runco LS-10i Installati on/Operation Manual 81 PRE L IMINAR Y color.space = ? 0 = Auto 1 = REC709 2 = REC601 3 = RGB-PC 4 = RGB-Video video.stand = ? 0 = Auto 1 = NTSC 2 = PAL 3 = SECAM gamma = ? 0 = 1.8 1 = 2.0 2 = 2.2 3 = 2.35 4 = 2.
External Control 82 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y vert.pos horiz.pos phase tracking sync.level = ? + - 0 -200 Fine Sync menu se ttings pip.pos = ? 0 = Top left 1 = Top right 2 = Bottom left 3 = Bottom right 4 = Picture by picture 5 = Split screen lamp.
External Control Runco LS-10i Installati on/Operation Manual 83 PRE L IMINAR Y 1.key 2.key 3.key = ? 0 = HDMI 1 1 = HDMI 2 2 = RGB 3 = YPrPb 1 4 = YPrPb 2 5 = S-video 6 = Video 7 = SCART HD 1/HD 2/HD 3 key source assignments. trig.1 trig.2 = ? 0 = Lamp 3 = 4:3 4 = AutoScope 5 = RS232 6 = On 7 = Off model.
External Control 84 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y pattern = 0 = White 1 = Black 2 = Red 3 = Green 4 = Blue 5 = Cyan 6 = Magenta 7 = Yellow 8 = ANSI Checkerboard 9 = Horizo.
External Control Runco LS-10i Installati on/Operation Manual 85 PRE L IMINAR Y msgbox = ? 0 = On 1 = Off This control enables or disables the display of power off, source and adjustment message boxes (brightness, contrast etc.). Default value is ON. cal.
External Control 86 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y RS-232 Error Codes If an errcode ? com mand retu rns one of th e following va lues, you hav e encountere d a likely system error requiring the attention of a qualified servic e technician.
External Control Runco LS-10i Installati on/Operation Manual 87 PRE L IMINAR Y 6.2 Using HDMI CEC Messages The LS-10i acce pts and can respond to CEC c ommand messa ges from a d isc player, satellite receiver or DVR/set-to p box via an HDMI connectio n.
External Control 88 Runco LS-10i Installa tion/Operation Manual PRE L IMINAR Y Inactive Source 0x9D CEC Version 0x9E Get CEC Version 0x9F Vendor Command With ID 0xA0 Abort Message 0xFF Polling Message N/A Table 6-4.
Specifications Runco LS-10i Installati on/Operation Manual 89 PRE L IMINAR Y 7.1 LS-10i Specifications Table 7-1 lists the LS- 10i specifications. 7. Specifications Table 7-1.
Specifications 90 Runco LS-10i Installa tion/Operation Manual P RELI M INARY (2) HDMI with HDCP: HDTV RGB and Component, EDTV, SDTV, HDMI (High Definition Multimedia Interfac e) with HDCP (High Bandwi.
Specifications Runco LS-10i Installati on/Operation Manual 91 PRE L IMINAR Y Brightness and Contrast: Cinema Standards Measur ement System (CSMS) Specifications - Brightness: 119 foot-Lamberts (fL) - Contrast Ratio: 251:1 These measurements are taken from the projector in a controlled, home theater environment.
Specifications 92 Runco LS-10i Installa tion/Operation Manual P RELI M INARY 7.2 LS-10i Dimensions Figure 7-1 shows the LS- 10i dimensions, in [ millimeters] and inch es. Figure 7-1. LS-10i Dimensions 25.30 642.6 5.20 132.0 8.34 21 1.9 .50 (ADJUST ABLE) 12.
Specifications Runco LS-10i Installati on/Operation Manual 93 PRE L IMINAR Y 7.3 Supported Timings Table 7-2 lists the signal types support ed by each input on the LS-10i.
Specifications 94 Runco LS-10i Installa tion/Operation Manual P RELI M INARY 1080/50p 1920x1080 50.00 56.250 148.500 √√ √ – 1080/60p 1920x1080 59.94/60.00 67.433/67.500 148.350/148.500 √√ √ – NTSC 3.58 – 59.94/60. 00 15.73 4/15.750 3.
.
Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com 020-1075-00 Rev. A September 20 10.
An important point after buying a device Runco LS-10I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Runco LS-10I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Runco LS-10I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Runco LS-10I you will learn all the available features of the product, as well as information on its operation. The information that you get Runco LS-10I will certainly help you make a decision on the purchase.
If you already are a holder of Runco LS-10I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Runco LS-10I.
However, one of the most important roles played by the user manual is to help in solving problems with Runco LS-10I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Runco LS-10I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
