Instruction/ maintenance manual of the product RX1512 RuggedCom
Go to page of 43
RuggedBackbone™ RX1512 Hardware Installation Guide Revision 105 - October 20, 2011 www.RuggedCom.com.
RuggedBackbone™ RX1512 RuggedBackbone™ RX1512: Hardware Installation Guide Copyright © 2011 RuggedCom Inc. All Rights Reserved Dissemination or reproduction of this document, or evaluation and communication of its contents, is not authorized except where expressly permitted.
RuggedBackbone™ RX1512 RuggedCom® RuggedBackbone™ 3 RX1512 Installation Guide Rev 105 Table of Contents FCC Statement And Cautions ................................................................................................... 8 1. Product Overview .
RuggedBackbone™ RX1512 RuggedCom® RuggedBackbone™ 4 RX1512 Installation Guide Rev 105 3.14.4. Installing an Operating System .................................................................... 34 3.14.5. The APE BIOS ............................
RuggedBackbone™ RX1512 RuggedCom® RuggedBackbone™ 5 RX1512 Installation Guide Rev 105 List of Figures 2.1. RX1512 Chassis Slot Assignment .................................................................................... 11 2.2. Front View - RX1512 .
RuggedBackbone™ RX1512 RuggedCom® RuggedBackbone™ 6 RX1512 Installation Guide Rev 105 3.22. MTRJ ............................................................................................................................... 28 3.23. SC .........
RuggedBackbone™ RX1512 RuggedCom® RuggedBackbone™ 7 RX1512 Installation Guide Rev 105 List of Tables 2.1. Module Status LED Indications ......................................................................................... 13 3.1. RJ45 Serial Console Pinout .
FCC Statement And Cautions RuggedCom® RuggedBackbone™ 8 RX1512 Installation Guide Rev 105 FCC Statement And Cautions Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules.
1. Product Overview RuggedCom® RuggedBackbone™ 9 RX1512 Installation Guide Rev 105 1. Product Overview 1.1. Functional Overview The RuggedBackbone™ RX1512 is a cost-efficient, rugged layer 3 switch and router.
1. Product Overview RuggedCom® RuggedBackbone™ 10 RX1512 Installation Guide Rev 105 WAN Port Options • Up to 4 T1/E1 ports via RJ45 connectors (channelized/unchannelized) • Up to 2 E1 ports via.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 11 RX1512 Installation Guide Rev 105 2. RuggedBackbone™ Modules The RX1512 chassis provides two module slots. Each slot accommodates a particular type of RuggedCom module. Figure 2.1, “RX1512 Chassis Slot Assignment” shows the module slots on the RX1512.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 12 RX1512 Installation Guide Rev 105 2.1. Front Panel The RX1512 Front Panel is equipped with an RS232 serial console port for initial management functions, and a locally connected 10/100Base-T Ethernet port for system management out of band from the switch fabric.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 13 RX1512 Installation Guide Rev 105 2.1.1. Module Status LEDs The front panel module status LEDs provide the following information: LED Purpose Description PM Indicates power supply status. I = Power supply is receiving input voltage.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 14 RX1512 Installation Guide Rev 105 Figure 2.11. 10FL: 3 × 10FL ST 2.2.3. SFP Modular Figure 2.12. FG5*: 2 × 1000LX/1000SX SFP Figure 2.13. FX5*: 4 × 100FX/100LX/100SX SFP Figure 2.14. 6FX50: 6 × 100FX SFP 2.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 15 RX1512 Installation Guide Rev 105 2.2.6. Cellular Modem Figure 2.21. W11, W21, W32 Cellular Modem Figure 2.22. W12, W22 Cellular Modem 2.2.7. DDS - Digital Data Services Figure 2.23. D02: 1 × DDS RJ45 2.
2. RuggedBackbone™ Modules RuggedCom® RuggedBackbone™ 16 RX1512 Installation Guide Rev 105 2.3. Power Supply The RX1512 power supply is integrated with the Control Module. The power supply and fail-safe relay connections are made on a pluggable terminal block located on the front panel of the Control Module.
3. Installation RuggedCom® RuggedBackbone™ 17 RX1512 Installation Guide Rev 105 3. Installation 3.1. Mounting The RuggedBackbone™ RX1512 features optional mounting brackets for panel and DIN rail mounting. The optional brackets attach to both sides of the appliance at the rear of the chassis.
3. Installation RuggedCom® RuggedBackbone™ 18 RX1512 Installation Guide Rev 105 Figure 3.3. DIN Rail Mounting: Side View 3.1.1. RX1512Dimensions Figure 3.
3. Installation RuggedCom® RuggedBackbone™ 19 RX1512 Installation Guide Rev 105 Figure 3.5. RX1512Dimensions – Top View Figure 3.6. RX1512 Dimensions – Side View.
3. Installation RuggedCom® RuggedBackbone™ 20 RX1512 Installation Guide Rev 105 3.2. Power Supply Wiring and Grounding The RX1512 features a Phoenix Plug Terminal Block. Both DC power supply and fail-safe relay connections are made on the same terminal block.
3. Installation RuggedCom® RuggedBackbone™ 21 RX1512 Installation Guide Rev 105 3.2.3. DC Power Supply Wiring Example + Figure 3.9. Wiring for RX1512 DC Power Supply • It is recommended to provide a separate circuit breaker for the power supply. • Equipment must be installed according to applicable local wiring codes.
3. Installation RuggedCom® RuggedBackbone™ 22 RX1512 Installation Guide Rev 105 3.4. Serial Console Port The serial console port on the front panel provides access to the boot-time control and configuration menu interface, and a console interface to the ROX™ operating system.
3. Installation RuggedCom® RuggedBackbone™ 23 RX1512 Installation Guide Rev 105 3.6. WAN Ports: BNC The RX1512 supports optional E1 WAN ports with BNC connectors. The Tx and Rx connections are labelled on the line module. See the illustration below for the connection configuration.
3. Installation RuggedCom® RuggedBackbone™ 24 RX1512 Installation Guide Rev 105 Cabling Category 1000Base- TX Compliant Required Action < 5 No New wiring infrastructure required. 5 Yes Verify TIA/EIA-568-A compliance. 5e Yes No action required. New installations should be designed with Category 5e or higher.
3. Installation RuggedCom® RuggedBackbone™ 25 RX1512 Installation Guide Rev 105 3.8. Serial Ports: RJ45 The RX1512 supports serial port line modules with RJ45 connections. On power-up, all serial ports default to RS485 mode. Each port can be individually set to RS232, RS485, or RS422 mode via software.
3. Installation RuggedCom® RuggedBackbone™ 26 RX1512 Installation Guide Rev 105 3.10. DDS Rx and Tx LED Indications The DDS module features Rx and Tx LED indicators that display transmit and receive status.
3. Installation RuggedCom® RuggedBackbone™ 27 RX1512 Installation Guide Rev 105 3.11.1. Module Insertion – SFP Special attention must be paid to the orientation of SFP modules upon installation in the RX1512 chassis. The figure below shows the proper orientation of SFP modules installed in both upper and lower line modules.
3. Installation RuggedCom® RuggedBackbone™ 28 RX1512 Installation Guide Rev 105 Figure 3.20. SFP module removal 3.12. Fiber Ethernet Ports Depending on the order code of the product, the RuggedBackbone™ RX1512 can be equipped with several different types of fiber optic ports.
3. Installation RuggedCom® RuggedBackbone™ 29 RX1512 Installation Guide Rev 105 3.13. Cellular Modems The RX1512 can be equipped with cellular modem modules for operation on GSM, EDGE, HSPA +, or CDMA networks. The cellular modems feature 50 Ω SMA antenna connectors on the front plate of each module.
3. Installation RuggedCom® RuggedBackbone™ 30 RX1512 Installation Guide Rev 105 3.13.1. GSM, EDGE, HSPA+ Cellular Modem Card The HSPA option is available for use on various GSM based networks. This option supports GSM, GPRS, EDGE, UMTS and WCDMA/HSDPA/HSUPA.
3. Installation RuggedCom® RuggedBackbone™ 31 RX1512 Installation Guide Rev 105 3. Note the location of the SIM card cages. For modules W11 and W32, install the SIM card in SIM 1 .
3. Installation RuggedCom® RuggedBackbone™ 32 RX1512 Installation Guide Rev 105 3.14. APE: Application Processing Engine 3.14.1. APE Overview The APE (Application Processing Engine) is an x86-based computer designed to occupy a single line module slot on the RX1512.
3. Installation RuggedCom® RuggedBackbone™ 33 RX1512 Installation Guide Rev 105 3.14.3. Secondary Network Interface In addition to the gigabit Ethernet interface on the faceplate, the APE features a gigabit Ethernet interface connecting to a port on the RX1512 chassis.
3. Installation RuggedCom® RuggedBackbone™ 34 RX1512 Installation Guide Rev 105 3.14.4. Installing an Operating System We recommend that the operating system be installed and configured by users with experience in installing and administering the chosen operating system.
3. Installation RuggedCom® RuggedBackbone™ 35 RX1512 Installation Guide Rev 105 3.14.5. The APE BIOS The APE module features a BIOS with functionality similar to that of a typical PC.
3. Installation RuggedCom® RuggedBackbone™ 36 RX1512 Installation Guide Rev 105 3.14.8. FAQs Q: How do I use a CD or DVD to install an operating system on the APE module? A: Connect an external CD/DVD drive to one of the APE USB ports.
4. Technical Specifications RuggedCom® RuggedBackbone™ 37 RX1512 Installation Guide Rev 105 4. Technical Specifications 4.1. Power Supply Specifications Input Range Power Supply Type Min Max Internal Fuse Rating Max. Power Consumption a Max Power Output Connections Internal 10 VDC 72 VDC 6.
4. Technical Specifications RuggedCom® RuggedBackbone™ 38 RX1512 Installation Guide Rev 105 4.4. Fiber Ethernet Port Specifications The following sections detail fiber optic specifications for ports that can be ordered with the modules on a RuggedBackbone™ RX1512.
4. Technical Specifications RuggedCom® RuggedBackbone™ 39 RX1512 Installation Guide Rev 105 4.4.2. Gigabit Ethernet (1Gbps) Optical Specifications Fixed Gigabit Transceivers Order Code Mode Connector Type Cable Type ( µ m) Tx λ (typ.) (nm) Tx min (dBm) Tx max (dBm) Rx Sensitivity (dBm) Rx Saturation (dBm) Distance (typ.
5. EMI And Environmental Type Tests RuggedCom® RuggedBackbone™ 40 RX1512 Installation Guide Rev 105 5. EMI And Environmental Type Tests Test Description Test Levels Severity Levels Enclosure Contact +/- 8 kV 4 IEC 61000-4-2 ESD Enclosure Air +/- 15 kV 4 IEC 61000-4-3 Radiated RFI Enclosure Ports 20 V/m Note a Signal ports +/- 4kV @ 2.
5. EMI And Environmental Type Tests RuggedCom® RuggedBackbone™ 41 RX1512 Installation Guide Rev 105 Test Description Test Levels Enclosure Contact +/-2kV, +/-4kV, +/- 8kV IEEE C37.90.3 ESD Enclosure Air +/-4kV, +/-8kV, +/-15kV IEEE C37.90.2 Radiated RFI Enclosure ports 35 V/m Signal ports +/- 4kV @ 2.
6. Agency Approvals RuggedCom® RuggedBackbone™ 42 RX1512 Installation Guide Rev 105 6. Agency Approvals Agency Standards Comments TUV UL 60950-1:2007, CAN/CSA-C22.
7. Warranty RuggedCom® RuggedBackbone™ 43 RX1512 Installation Guide Rev 105 7. Warranty RuggedCom warrants this product for a period of five (5) years from the date of purchase. This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void.
An important point after buying a device RuggedCom RX1512 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RuggedCom RX1512 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RuggedCom RX1512 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RuggedCom RX1512 you will learn all the available features of the product, as well as information on its operation. The information that you get RuggedCom RX1512 will certainly help you make a decision on the purchase.
If you already are a holder of RuggedCom RX1512, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RuggedCom RX1512.
However, one of the most important roles played by the user manual is to help in solving problems with RuggedCom RX1512. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RuggedCom RX1512 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
