Instruction/ maintenance manual of the product RS900W RuggedCom
Go to page of 7
RuggedWireless ™ RS900W Family Wireless Firmware Upgrade Guide RuggedCom Inc. 30 Whitmore Road, Woodbridge, Ontario Canada L4L 7Z4 Web: www.ruggedcom.
2 © 2007 Rugg edCom Inc. All rights reserved Rev100 Federal Communications Commission Radio Frequency Inte rference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
3 © 2007 Rugg edCom Inc. All rights reserved Rev100 Table of Contents 1 Software U pgrade ............................................................................................................... ... 4 1.1 Overview .............................
4 © 2007 Rugg edCom Inc. All rights reserved Rev100 1 Sof tware Upgrade 1.1 Overview The following instructions are meant to guide the user through the software upgrade and (example) configuration procedure for the RuggedWireless™ RS900W family of industrially har dened, fully managed IEEE 802.
5 © 2007 Rugg edCom Inc. All rights reserved Rev100 b- Enter <CTRL+S> to access the ROS shell prompt c- Type “ version ” command and you should see something like “ROS v3.
6 © 2007 Rugg edCom Inc. All rights reserved Rev100 2 Example RS900W configurations 2.1 Configuration for WPA2 en abled “Access Point” operation a- Remove any previous configuration on the RS900W: Ensure that Diagnostics -> Load Factory De fault Configuration -> Yes is selected.
7 © 2007 Rugg edCom Inc. All rights reserved Rev100 h- Set SSID: Ensure that WLAN Interface -> Network Parameters -> Network Name [SSID] -> RUGGEDTEST is configured. i- Set Authentication Mode: Ensure that WLAN Interface -> Security Parameters -> Authentication Mode -> wpa2-psk is selected.
An important point after buying a device RuggedCom RS900W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RuggedCom RS900W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RuggedCom RS900W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RuggedCom RS900W you will learn all the available features of the product, as well as information on its operation. The information that you get RuggedCom RS900W will certainly help you make a decision on the purchase.
If you already are a holder of RuggedCom RS900W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RuggedCom RS900W.
However, one of the most important roles played by the user manual is to help in solving problems with RuggedCom RS900W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RuggedCom RS900W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
