Instruction/ maintenance manual of the product ES-2310C Ruby Tech
Go to page of 3
ES-2310C: 8-Port L2 Managed Fast Ethernet Switch with 2 SFP Gigabit Dual Media Key Features Key Features Standard compliance ---IEEE 802.3 10Base-T ---IEEE 802.3u 100Base-TX ---IEEE 802.3ab 1000Base-TX ---IEEE 802.3z 1000Base-X Ethernet ---IEEE 802.3x flow control capability ---ANSI/IEEE 802.
or long distance fiber backbone attachment. Use of the SFP/GBIC will disable their corresponding built-in 10/100/1000Base-T connections. Broadcast/Multicast/unknown-unicast Storm Control To limit too many broadcast/multic ast/unknown-unicast flooding in the network, broadcast/multicast storm control is used to restrict excess traffic.
---Static mac, to limit which mac addresses can pass through or not ---Mac addresses learning limit, to set up the maximum amount of mac that each port can learn Snmpv1,v2c Network Management RFC 1213.
An important point after buying a device Ruby Tech ES-2310C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ruby Tech ES-2310C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ruby Tech ES-2310C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ruby Tech ES-2310C you will learn all the available features of the product, as well as information on its operation. The information that you get Ruby Tech ES-2310C will certainly help you make a decision on the purchase.
If you already are a holder of Ruby Tech ES-2310C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ruby Tech ES-2310C.
However, one of the most important roles played by the user manual is to help in solving problems with Ruby Tech ES-2310C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ruby Tech ES-2310C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
