Instruction/ maintenance manual of the product WD12.5G Rubbermaid
Go to page of 10
W et & Dr y V acuum Cleaner Owner ’s Manual Operating and Maintenance Instructions Aspiradora de Líquidos y P olvo Manual Del P ropietario Instrucciones de F uncionamiento y de Mantenimiento As.
T able of Contents Congratulations! W elcome to the world of smarter vacuums. As the proud new owner of Rubbermaid Commercial P roduct’s wet/dr y vacuum cleaner , you can rest assured that you have purchased a convenient, efficient, and high-quality product.
4 5 • If vacuum cleaner is not working as it should— or has been dropped, damaged, lef t outdoors, or exposed to water—discontinue use immediately and take it to a ser vice center for inspection. Call 1-866-524-5233 to find a location near you.
6 7 Assembled V iews ENGLISH Assembled cart Filter locations latch accessor y storage cord hook tank release knob drain cap on/off switch wet/dr y selector wand storage wand storage blower port HEP A .
Attach tank brace to wheel shaf t support using small screws, star washers, and small nuts. Use 10 mm socket wrench and box end wrench to fully tighten. FULL Y TIGHTEN ALL SCREWS ON CART! Attach caster brackets to front of cart frame using small screws, star washers, and small nuts.
Assembly (cont.) 16 E 1 2 18 C B 1 2 19 B D V (Complete view of assembled cart frame.) Attach bumper to cart frame. Align posts and tabs to secure bumper . Place inner tank into outer tank. Ensure tab aligns with notch in outer tank. Slide small foam filter onto standpipe.
2 3 W et Use Mode Slide wet/dr y selector lef t to expose dr y port. 12 13 ENGLISH 1 W et pi ck-u p: Slid e w et/d r y sele cto r ri ght to exp ose “wet ta nk i nle t”. Dr y pick-up: Slide wet/dr y selector lef t to expose “dr y tank inlet”. Dry Use Mode W et/Dry Selection 2 25 1 U Slide wet/dr y selector to desired function.
14 15 ENGLISH 1 Disconnect power cord from outlet. Release latches. Remove powerhead. Reinstall inner tank. Remove inner tank and empty . 2 2 1 A Reinstall powerhead. Fasten latches. (V acuum cleaner is now ready for use.) 3 B 4 B 5 1 A Emptying Dry T ank W et Mode Operation 1 Slide wet/dr y selector right to expose wet port.
16 17 ENGLISH Emptying W et T ank 1 Disconnect power cord from outlet. Unscrew and remove drain cap. Reinstall drain cap. (V acuum cleaner is now ready for use.) Empty contents into suitable drain or container . Tilt vacuum cleaner to allow any remaining liquid to drain.
18 19 T urn powerhead upside down. Remove old large foam filter . Replace with new large foam filter . 2 3 1 W W Replacing Small and Large F oam Filter 3 V 4 V 1 2 1 2 A Disconnect power cord from outlet. Release latches. Remove powerhead. Slide new small foam filter onto standpipe in inner tank.
An important point after buying a device Rubbermaid WD12.5G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rubbermaid WD12.5G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rubbermaid WD12.5G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rubbermaid WD12.5G you will learn all the available features of the product, as well as information on its operation. The information that you get Rubbermaid WD12.5G will certainly help you make a decision on the purchase.
If you already are a holder of Rubbermaid WD12.5G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rubbermaid WD12.5G.
However, one of the most important roles played by the user manual is to help in solving problems with Rubbermaid WD12.5G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rubbermaid WD12.5G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
