Instruction/ maintenance manual of the product 5L10 Rubbermaid
Go to page of 12
Congratulations and thank you for pur chasing a Rubbermaid storage building . BEFORE YOU BEGIN – BUILDING CODES Be sure to check your local building codes, ordinances and restrictions, and applicable neighborhood governances.
Description Part Number Assembly Letter Quantity Required T ools T wo Person Assembly Floor Front Floor 5L01 A 1 Walls Left Back 5L04 D 1 Right Back 5L05 F 1 Front Left Side 5L02 G 1 Front Right Side .
Build a solid, level surface for the shed foundation. Consult your local building authority for ordinances, restrictions, or permits required before building any structure at your home. Note: Minimum dimensions for foundations shown. FLOOR PLAN: Size the construction site to fit the entire floor .
2 . 0 Floor Installation A Using a rubber mallet and screwdriver , knock out the tabs for the door hinge, 2 places on Front Floor (A) . b . Drill pilot hole through top surface of floor , 2 places on Front Floor (A) .
3 . 0 W all Panel G Installation Using a screwdriver , punch out the screw holes on the top of Front Left Side (G) 2 places. a . G Screw Holes G A Snap Front Left Side (G) into Front Floor (A) . Hold Front Left Side (G) upright to prevent it from falling (until Left Back (D) is installed).
1 2 D G C OVERHEAD VIEW DETAIL 3-1_B SCALE 1/1 DETAIL 3-3_E SCALE 1/1 DETAIL 3-3_B SCALE 1/1 DETAIL 3-4_B AND 3-5_B SCALE 1/1 DETAIL 3-6_B AND 3-7_B SCALE 1/1 3 . 1 W all Panel D Installation Connect Left Back (D) into dovetails of Front Left Side (G) .
3 . 2 W all Panel H Installation Using a screwdriver , punch out the screw holes on the top of Front Right Side (H) 2 places. a . H H Screw Holes H Snap Front Right Side (H) into Front Floor (A) . Hold Front Right Side (H) upright to prevent it from falling (until Right Back (F) is installed).
Connect Right Back (F) onto dovetails of Front Right Side (H) . Align the lap joint between Left Back (D) and Right Back (F). b . Engage snaps on bottom of Right Back (F) into Front Floor (A) .
Install Wall Connector (Q) 5 places, connecting Left Back and Right Back Panels (D and F). Position connectors in slots and slide down to snap in place. d . 2 1 1 click D F OVERHEAD VIEW D F Install Wall Connectors Q 4 . 0 Roof Panel J & Door Installation Install Front Roof (J) onto side sections.
Ensure Front Roof (J) is positioned against the back wall tongues. From outside the shed, install one Screw (AA) at each corner . Hold the edge of the roof down firmly at the corners while installing each screw . Install remaining screws into remaining locations of back walls.
From inside the shed, install four Screws (AA) into the roof, two on each side wall. Note: The screws also have to go through the Roof Brace (RB) at each end to properly secure the roof! A second person on the outside of the shed should hold down the edge of the roof firmly at each screw location.
5 . 1 Door Finishing Installation Install Lock Hasp (X) into opening on Right Door (K). a . Install Door Handle (T) onto Left Door (L) using four Screws (AA). b . click X K T L AA (4) Printed in U.S.A. 2010 Rubbermaid Incorporated, Huntersville, NC U.
An important point after buying a device Rubbermaid 5L10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rubbermaid 5L10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rubbermaid 5L10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rubbermaid 5L10 you will learn all the available features of the product, as well as information on its operation. The information that you get Rubbermaid 5L10 will certainly help you make a decision on the purchase.
If you already are a holder of Rubbermaid 5L10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rubbermaid 5L10.
However, one of the most important roles played by the user manual is to help in solving problems with Rubbermaid 5L10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rubbermaid 5L10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
