Instruction/ maintenance manual of the product Werke Rowenta
Go to page of 10
Rowenta Werke GmbH 63016 Offenbach am Main Expert Instructions for Use Temperature control dial Temperature indicator light Steam button Soleplate Cord storage Drain screw cover Boiler unit Removable .
IMPORTANT SAFETY INSTRUCTIONS When using your appliance, basic safety precautions should always be followed, including the following: Read all instructions before using the generator. 1. Use appliance only for its intended use. 2. To protect against a risk of electric shock, do not immerse the appliance in water or other liquids.
BEFORE USE M Please read all of the instructions for use and the Important Safeguards carefully. M Remove all packaging from the generator. M The first time the steam generator is used, it is normal for a small amount of smoke and a slight odor to be produced.
4. Replace it securely on the base and push down to lock in place (3) . The steam generator is designed to operate using tap water. Please review WATER RECOMMENDATIONS section for additional water information. TURNING ON THE STEAM GENERATOR 1. Completely remove the power cord from its storage space before plugging in.
3. Adjust the steam control dial located on the control panel (6) , eg. less steam for low temperatures. Be careful␣ ! The steam generator is ready when the temperature indicator light goes out and when the green “steam ready“ light stays on.
VERTICAL STEAM IRONING Warning: Steam produced is very hot. To avoid burns and scalding, never iron or steam clothes while they are being worn. M To remove wrinkles in cotton or linen, the soleplate can come in contact with the fabric for optimal results.
The iron soleplate M In normal use a draggy coating may build up on the soleplate (starch, detergent buildup, burnt synthetic fibers). This can be easily removed by using the Rowenta Soleplate Cleaning Kit or a quality hot iron soleplate cleaner available at most stores.
6. Shake the base unit for 2 minutes and then empty it completely over a sink or bucket (14) . Repeat this process. 7. Important : Before closing, make sure no water remains in the boiler. 8. Replace and tighten the drain screw with a coin . 9. Replace the drain screw cover.
TROUBLESHOOTING Problems Possible causes Solutions The steam The appliance is not Check that your generator switched on. appliance is correctly ON light does plugged in and press not light up. the on/off switch (located on the front of the appliance).
In the interest of improving products, Rowenta reserves the right to change specifications without prior notice. LIMITED WARRANTY All Rowenta products are warranted for 1 year from date of purchase against defects in material and workmanship.
An important point after buying a device Rowenta Werke (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rowenta Werke yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rowenta Werke - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rowenta Werke you will learn all the available features of the product, as well as information on its operation. The information that you get Rowenta Werke will certainly help you make a decision on the purchase.
If you already are a holder of Rowenta Werke, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rowenta Werke.
However, one of the most important roles played by the user manual is to help in solving problems with Rowenta Werke. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rowenta Werke along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
