Instruction/ maintenance manual of the product Luxe Steam Iron Rowenta
Go to page of 11
Professional Luxe Instructions for Use.
2 IMPORT ANT SAFETY INSTRUCTIONS When using your iron, basic safety precautions should always be followed, including the following: Read all instructions before using the iron. 1. Use iron only for its intended use. 2. To protect against a risk of electric shock, do not immerse the iron in water or other liquids.
3 SPECIAL INSTRUCTIONS 1. This is a 1400 watt appliance. To avoid a circuit overload, do not operate another high wattage appliance on the same circuit. 2. If an extension cord is absolutely necessary, a 12- ampere cord should be used. Cords rated for less amperage may overheat.
4 ■ Description: A Spray nozzle B Covered water filling inlet C Variable steam control D Self clean system E Spray button F Burst of steam button G Auto-off indicator light (depending on model) H Pi.
5 BEFORE USE 왎 Please read the instructions for use and the Important Safeguards carefully. 왎 Remove the transparent soleplate protector. 왎 It is normal for a small amount of smoke to be produced the first time the iron is used. This will quickly disappear.
6 SELECTING THE TEMPERATURE Set the temperature control dial according to the type of fabric you are ironing. Check the fabric's label for appropriate setting. To avoid an automatic switch off while the iron is heating up, always keep the iron on its heel.
7 SPRAY SETTING 왎 Ensure there is water in the tank. 왎 Moistening the fabric with the spray will make wrinkle removal easier. 왎 Press the spray button down slowly for a jet or quickly and strongly for a mist. 왎 Do not spray silk, etc. BURST OF STEAM 왎 To remove stubborn wrinkles or press in a sharp crease, use the burst of steam button.
8 DRY IRONING 왎 Slide the variable steam control fully to the left. We recommend dry ironing with an empty tank to be sure there are no drips, but it can also be performed with water in the tank. AFTER IRONING 왎 Unplug the iron. Set the variable steam control to max.
9 Iron and other impurities If your water supply contains large amounts of iron or organic matter, these minerals can collect inside the iron and eventually appear as brown stains. If you experience these problems Rowenta recommends using inexpensive bottled spring water.
10 WARNING: Iron and soleplate may still be hot, exercise care while wiping. 왎 Place iron on heel and leave to cool. 왎 IMPORTANT: before using the iron after self cleaning, test steam and burst of steam on an old towel or cloth to ensure all loose material has been removed from the iron.
11 IRON TROUBLESHOOTING Problem Possible cause Solution Iron is leaking. DISTILLED WATER DO NOT use 1 00 % pure distilled water, use tap water. In very hard water areas mix half tap water with half distilled to reduce hardness; or use inexpensive bottled spring water.
An important point after buying a device Rowenta Luxe Steam Iron (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rowenta Luxe Steam Iron yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rowenta Luxe Steam Iron - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rowenta Luxe Steam Iron you will learn all the available features of the product, as well as information on its operation. The information that you get Rowenta Luxe Steam Iron will certainly help you make a decision on the purchase.
If you already are a holder of Rowenta Luxe Steam Iron, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rowenta Luxe Steam Iron.
However, one of the most important roles played by the user manual is to help in solving problems with Rowenta Luxe Steam Iron. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rowenta Luxe Steam Iron along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
