Instruction/ maintenance manual of the product RSV-SATA-Cage-34 Rosewill
Go to page of 10
RSV-SATA-Cage-34 Internal SATA/SAS Hot-Swap Cage 3x 5.25” to 4x 3.5”/2.5” USER’S Manual.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual Product Overview 2 Introduction 3 Specification 3 Accessory Bag Detail 3 Installation Guide 4 Hard Drive T ray Assembl y / Disas sembly 4 Hard Drive Installation 4 Installing a 3.5” HDD 4 Installing a 2.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual Pr oduct Overview 2.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual Intr oduction Specification Accessory Bag Detail RSV -SA T A-Cage-34 is a Hot Swap HDD Cage which converts space of 3x 5.25” CD-rom / DVD-r om to 4x 3.5” or 2.5” SA T AI, SA T AII, SA T AIII, or SAS HDD tray .
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual Installation Guide • Hard Drive T ray Assembly / Disassembly • Hard Drive Installation Installing a 3.5” HDD 1. Each HDD T ray has a press button for releasing the hinge. T o remove the HDD T ray; first press the button.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual HDD 1 HDD 2 HDD 3 HDD 4 HDD power 12V Fan power 12V Fan 12CM Installing a 2.5” HDD 1. T o install a 2.5” HDD, please make sure that the 2.5” HDD is align with the screw holes on the tray .
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual Hot Swap Cage Installation – Case 1. Remove three 5.25” bay covers from the case. 2. Insert the Cage into the slot.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual 3. Secure the Cage with Screws 1. Remove the screws fr om each side of the Chassis. (two on each side) 2.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual 3. T o remove the cage; first press the two r ound shape button using your thumbs, then use your index finger to push the 3.5” module to remove it. 4. Pull the module out from the front. 5.
Internal SATA/SAS Hot-Swap Cage RSV-SATA-Cage-34 User Manual 6. Place the four rails onto the SA T A/SAS Hot-Swap Cage 7. Slide the Cage into the Server Chassis to complete the installation process. Thank you for purchasing a quality Rosewill Pr oduct.
An important point after buying a device Rosewill RSV-SATA-Cage-34 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rosewill RSV-SATA-Cage-34 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rosewill RSV-SATA-Cage-34 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rosewill RSV-SATA-Cage-34 you will learn all the available features of the product, as well as information on its operation. The information that you get Rosewill RSV-SATA-Cage-34 will certainly help you make a decision on the purchase.
If you already are a holder of Rosewill RSV-SATA-Cage-34, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rosewill RSV-SATA-Cage-34.
However, one of the most important roles played by the user manual is to help in solving problems with Rosewill RSV-SATA-Cage-34. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rosewill RSV-SATA-Cage-34 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
