Instruction/ maintenance manual of the product RGS-1024 Rosewill
Go to page of 16
24-Port Gigabit Ethernet Switch RGS-1024 User Manual.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -1- COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of Rosewill Inc. Other brands and product names are trademarks or r egistered trademarks of their respective holders.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -2- FCC ST A TEME NT This equipment has been tested and found to compl y with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -3- CE Mark Warning This is a class A product. In a do mestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Safety Warning • Place connecting cables care fully so that no one will step on them or stumble over them.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -4- • Do not use the device outside, and make sure all the connections are indoors. • Do not obstruc t the device ventilation slot s, as insufficient airflow may harm your device. • Do not use this product near water , eg, in wet basement, or near a swimming pool.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -5- Package Contents The following contents should be found in your package: ¾ One RGS-1024 Switch ¾ One power cord ¾ This User Guide ¾ Rubber footpads for Desk-mount ¾ Rack-mount kit for installing the switch in a 19-inch rack ) Note: Make sure that the package contains the above items.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -6- Chapter 1. Introduction of the Product This chapter describes the features of the RGS-1024 24-port Gigabit Ethernet Switch.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -7- link status and activity , allowing you to quickly detect and correct problems on the network.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -8- assigned a priority to. The illustration below shows how 802.1p priority queuing is implemented on the Switch. Mapping QoS on the Switch The Switch has four priority queues labeled 0, 1, 2 and 3.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -9- Chapter 2. Installation 2.1 Mounting the Switch on a Desk Before place the Switch on a desk, attach four rubber footp ads to the flutes on the Switch bottom, then lay the Switch on the desktop, where can be have as much as 5kg placed on top.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -10- Figure 2-2 Fasten the Switch in the rack 2.3 Power On RGS-1024 24-port Gigabit Ethe rnet Switch is powered by AC power supply .
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -1 1- Chapter 3. Identifying External Componen ts This Chapter describes the front panel, rear panel and LED indicators of the Switch. 3.1 Front Panel The front panel of the RGS-1024 cons ists of switch LED indicators, 24 10/100/1000Mbps RJ-45 ports.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -12- of the Switch. The following section shows the LED indicators for the switch along with an explanation of each indicator . Figure 3-3 RGS-1024 Switch LEDs sketch ¾ POWER LED: This indicator will light solid re d when the Switch powers up.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -13- Appendix A: Specificati ons General Standards IEEE802.3 10Base-T; IEEE802.3u 100Base-TX; IEEE802.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -14- Transfer Method Store-and-Forward MAC Address Learning Automatically learning, automatically aging 10Base-T: 14881pps/Port 100Base-Tx: 148810.
24-Port Gigabit Ethernet S witch RGS-1024 User Manual -15- Appendix B: Troublesh ooting 1. The Power LED is not lit ¾ Make sure the AC power cord connected the Switch with power source properly .
An important point after buying a device Rosewill RGS-1024 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rosewill RGS-1024 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rosewill RGS-1024 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rosewill RGS-1024 you will learn all the available features of the product, as well as information on its operation. The information that you get Rosewill RGS-1024 will certainly help you make a decision on the purchase.
If you already are a holder of Rosewill RGS-1024, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rosewill RGS-1024.
However, one of the most important roles played by the user manual is to help in solving problems with Rosewill RGS-1024. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rosewill RGS-1024 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
