Instruction/ maintenance manual of the product RC-213 Rosewill
Go to page of 10
SERVER RSV-S4 USER Manual.
SERVER RSV-S4 User Manual Introduction RSV-S4 can allow one SATA II 3Gbps port to communicate and connect to four (or five) SATA II 3Gbps hard drives by one eSATA single-lane cable.
1.2. Package Contents • Multi-sure System • This User’s Manual • eSATA External Cable • UL certified Power Cord • RC-213 Hard Drive Controller • RC-213 User Manual • Screws set • Int.
Step 1 Unscrew three screws of MultiBay System. Step 2 Open the cover of MultiBay System. SERVER RSV-S4 User Manual 3 Step 3 Open the Front door of MultiBay System. Step 4 Install HDDs. Internal SATA cables may block the installation of the lowest hard drive.
Step 6 Connect SATA and Power Cables to Hard Drives and Bridge Board. SERVER RSV-S4 User Manual 4 Step 5 Fasten the screws to HDDs. 6-a 6-b 6-c 6-e 6-d.
Step 8 Fasten the cover of MultiBay System. Step 9 Switch the correct AC Power Input (115V or 230V) Connect eSATA cable to RC-213 SERVER RSV-S4 User Manual 5 Step 7 Close the Front door of MultiBay System. 8-a 8-b Step 10 Please install RC-213 according to RC-213 user manual .
Step 12 Plug power cord to RSV-S4. Step 14 Turn on the computer. Enter RC-213 SiliconImage RAID BIOS to complete RAID setting. ( If you don’t want to set any RAID, please skip this step and ENTER Windows directly.) Please Read RC-213 user manual carefully for more RAID setting information.
SERVER RSV-S4 User Manual 7 Bridge Board Dimension & Placement Bridge Board Jumper and LED Pin Header J1 P1 HDD LED JP3 LED JP4 A B C D E H 2 1 4 3 CHIP P6 / P7 P2 HDD HDD HDD HDD P3 P4 P5.
SERVER RSV-S4 User Manual 8 LED# H A ~ E 12(JP3) 34(JP3) LED Mode Host LED HDD LED Power LED System LED Description OFF Ǻ No function. ON Ǻ Bridge board working & host port connecting. Blink Ǻ Host port accessing. OFF Ǻ No function. ON Ǻ Bridge board working & host port connecting & Hard drive connecting.
www.rosewill.com.
An important point after buying a device Rosewill RC-213 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rosewill RC-213 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rosewill RC-213 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rosewill RC-213 you will learn all the available features of the product, as well as information on its operation. The information that you get Rosewill RC-213 will certainly help you make a decision on the purchase.
If you already are a holder of Rosewill RC-213, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rosewill RC-213.
However, one of the most important roles played by the user manual is to help in solving problems with Rosewill RC-213. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rosewill RC-213 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
