Instruction/ maintenance manual of the product EM-1 Rosen Entertainment Systems
Go to page of 9
38114 Rosen_cover.p65 8/3/01, 10:26 AM 1.
T able of Content s Section Page 1. Quick Reference Guide 1- 2 2. About your EM1 System 3 3. Installation of your EM1 4-9 4. Using the Remote Control 10- 1 1 5.
Page 13 6 T rouble Shooting Y our EM1 3 Inst alling Y our EM1 This section will give a brief trouble shooting guide Please call Rosen T echnical Support at 888-883-2790 for further information or technical support. • NO AUDIO - Check volume level. Check MUTE button.
Page 1 Power • Depress the power button on either the remote control or the right side of the monitor to power the EM1 on. Switching Channels • Using either the remote control or the buttons on the right side of the monitor , switch the channels up or down as desired.
1 EM1 Quick Reference Guide The User remote is used for day to day operation. It has basic functions such as: • V olume Up and Down and Mute • Channel Up and Down • Power On and Off • Mode Select Please refer to Section 4, Using the Remote Control, for further details.
2 About your EM1 Y our Rosen EM1 has the following components: • Fully adjustable 6.8 ” LCD, Infrared remote receiver , with audio speakers. Figure 1 • Cable ready EM-1 T uner Module with auxiliary inputs. Figure 2 • T wo remote controls (one user remote and one master remote) Figure 3 • One AC power adapter .
Page 4 3 Inst alling Y our EM1 A. Getting St arted • Locate the desired placement of components to ensure a proper fit. Make sure the monitor has enough room for desired movement. W arning: Excessive moisture and condensation will damage unit. Be sure your chosen location for the interface box and monitor are in a clean dry area.
B. Mounting of Components (Cont.) T able T op or Under Counter Mount • Use the Mounting base plate as a template to mark mounting holes • Mount base plate to monitor using 6-32 screws provided • Select Appropriate cable • Route 15ft interface cable from j-box to desired Tuner module location.
1 2 3 4 3 Inst alling Y our EM1 1.4 screws 10-32 x 1 Fhp 100 degree 2. # 10 washer ss 100 degree 3. Mounting baseplate 4. EM1 Main FPD Assembly Note : Mounting plate is only used when you want to surface mount your EM1 Interface cable Page 6 3 Inst alling Y our EM1 C.
An important point after buying a device Rosen Entertainment Systems EM-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rosen Entertainment Systems EM-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rosen Entertainment Systems EM-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rosen Entertainment Systems EM-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Rosen Entertainment Systems EM-1 will certainly help you make a decision on the purchase.
If you already are a holder of Rosen Entertainment Systems EM-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rosen Entertainment Systems EM-1.
However, one of the most important roles played by the user manual is to help in solving problems with Rosen Entertainment Systems EM-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rosen Entertainment Systems EM-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
