Instruction/ maintenance manual of the product SEP340X Roper
Go to page of 16
Electric Range Thank you for choosing a Roper appliance. This Use and Care Guide will help you operate and maintain your new, quality- built Roper range. Keep this Use and Care Guide in a safe place for future reference. Complete and mail the Product Registration Card.
Important Safety Instructions To reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including the following: 1. Read all instructions before using 10. DO NOT touch surface units, areas 16.
28. DO NOT soak removable heating elements in water. The element will be damaged and shock or fire could result. 29. DO NOT clean door heat seal. It is essential for a good seal Care should be taken not to rub, damage, or move the seal. Clean only parts recommended in this Use and Care Guide.
Parts & Features Models SEC350X (shown) & SEP340X Plug-in surface unit Chrome reflector bowl Control panel Broil element Anti-tip bracket cleamn (Model Standa (Model Model and seri Oven vent C.
Using Your Range Using the surface units Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF. Surface unit markers The solid dot in the surface unit marker shows which surface unit is turned on by that knob.
Using the oven controls Baking 1. Position the rack(s) properly before turning on the oven. To change rack position, pull rack out to stop, raise front edge and lift out. The rack(s) should be placed so the top of the food will be centered in the oven.
Using the automatic MEALTIMER’” clock The automatic MEALTIMER clock is designed to turn the oven on and off at times you set, even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven such as meats and casseroles.
The oven vent Oven / vent Hot air and moisture escape from the oven through a vent under the right rear surface unit. You can cook on the unit, or keep food warm on it while the oven is on. The vent is needed for air circulation. Do not block the vent.
Caring For Your Range Bum And Electrical Shock Hazard Make sure all controls are OFF and the range is cool before cleaning. Failure to do so can result in burns or electrical shock. The control knobs 1. Turn control knobs to the OFF position. 2. PulI control knobs straight off.
The lift-up cooktop 1. Lift front of cooktop at center 2. Swing up the support rod. 3. Carefully lower the cooktop onto the support rod. 4. Wipe surface under cooktop with warm, soapy water. Use a soap- filled plastic scouring pad on heavily-soiled areas.
The standard-cleaning oven (Model SEP340X) The standard oven has to be hand cleaned. Use warm soapy water, soapy steel wool pads or a commercial oven cleaner.
Cleaning chart Bum And Electrical Shock Hazard Make sure all controls are OFF and the range is cool before cleaning. Failure to do so can result in burns or electrical shock.
Heavy-duty aluminum foil. HOW TO CLEAN n Make sure oven is cool. n Remove door for easier access. n Clean heavily-soiled areas or stains. Rinse well with water. n Place piece of foil on oven floor to catch spill- overs. Make sure the foil is centered and long enough to start up both side oven walls without wrinkling.
The oven light (Model SEC350X) To turn the oven light on, push the Oven Light Switch on the control panel. Push the switch again to turn off the light. To replace: Electrical Shock And Personal Injury Hazard . Make sure oven and light bulb are cool and power to the oven has been turned OFF before replacing the light bulb.
Before You Call For Service If you are having an operating problem, check the chart to see what the cause might be before you call for assistance. OPERATING PROBLEM CHECK IF WHAT TO DO Nothing operates. . Range is properly connected to a live l Contact an authorized RoperSM service circuit with the proper voltage.
LIMITED WARRANTY ROPER’” Home Appliances LENGTH OF WARRANTY (From date of purchase) PRODUCTS COVERED WHAT WE WILL PAY FOR FULL ONE YEAR WARRANTY All Roper Appliances Replacement parts and repair labor to correct defects in materials or workmanship.
An important point after buying a device Roper SEP340X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roper SEP340X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roper SEP340X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roper SEP340X you will learn all the available features of the product, as well as information on its operation. The information that you get Roper SEP340X will certainly help you make a decision on the purchase.
If you already are a holder of Roper SEP340X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roper SEP340X.
However, one of the most important roles played by the user manual is to help in solving problems with Roper SEP340X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roper SEP340X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
