Instruction/ maintenance manual of the product SRX-12 Roland
Go to page of 16
1 Thank you, and congratulations on your choice of the SRX-12 “Classic EPs” Wave Expansion Board. This expansion board contains high-quality electric piano and clavi sounds that are indispensable for a wide range of musical styles, including R&B, hip-hop, pop, and jazz.
2 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. .......................................................................................................... 002a • Do not open or perform any internal modifica- tions on the unit.
3 安全上のご注意 001 ● この機 器を使用する前に、以 下の指示と取扱説 明書をよく読んでください。 .............................................................................................................. 002a ● この 機器を分解 したり、改造 したりしな いでく ださい。 .
4 IMPORTANT NOTES When you purchase the SRX-12 expansion board from an authorized Roland dealer, the included sounds and samples are licensed, not sold, to you by Roland Corporation, for commercial use in music production, public performance, broadcast, etc.
5 INSTALLING THE WAVE EXPANSION BOARD * Turn off your instrument. 1. Remove the cover located on the top (or rear) of your instrument. 928 * When turning the unit upside-down, get a bunch of newspapers or magazines, and place them under the four corners or at both ends to prevent damage to the buttons and controls.
6 When playing patches on the expansion board, we recommend that you set all the EFFECTS ON/OFF settings on the Fantom series/XV series to “ON.” If such settings are set to “OFF,” you may not obtain the intended sound. * Note that the Release Time has been set to a fairly long value for some of the patches.
7 When you create a Patch using the waveforms stored in the Expansion Board, observe the following points: * If you make a Patch with a single voice and then later play it in a chord, the sound may be distorted with certain settings for the Effects and TVA.
8 About the SRX-12 dedicated piano mode (for Fantom-X6/X7/X8 users) When you install the SRX-12 in the Fantom-X6/X7/X8, the two screens “Classic EP” and “Classic Clav” will be added to Piano mode, letting you adjust the sound using a simple and intuitive classic user interface.
9 About the SRX-12 dedicated piano mode (for Fantom-X6/X7/X8 users) 1. In the Piano Mode (Classic EP) screen, press [F2] to access the following screen. fig.EP-Preset_60 2. Press [F3 (Preset 1)]–[F8 (Preset 6)] to select the desired sound. Default setting Changing the preset sounds 1.
10 About the SRX-12 dedicated piano mode (for Fantom-X6/X7/X8 users) [F6 (Phaser)] Switches the phaser on/off. When you switch the phaser on, the following functions will be assigned to realtime control knobs 1–4. [F7 (EQ)] Switches the equalizer on/off.
11 About the SRX-12 dedicated piano mode (for Fantom-X6/X7/X8 users) 1. In the Piano Mode (Classic Clav) screen, press [F2] to access the following screen. fig.Clav-Preset_60 2. Press [F3 (Preset 1)]–[F8 (Preset 6)] to select the desired sound. Default setting Changing the preset sounds 1.
12 SRX-12 専用ピアノ・モードについて （Fantom-X6/X7/X8 をお使いのお客様へ） SRX-12 を F antom-X6/X7/X8 に取り付けると、ピアノ・モードに 「Classic EP」 と「.
13 SRX-12 専用ピアノ・モードについて （Fantom-X6/X7/X8 をお使いのお客様へ） 1. Piano Mode（ Classic EP）画面で［F2］ を押して、以下の画 面を表示させます。 fig.
14 SRX-12 専用ピアノ・モードについて （Fantom-X6/X7/X8 をお使いのお客様へ） ［F5（Chorus） ］ コーラスをオン／オフします。 コーラスをオンにすると.
15 SRX-12 専用ピアノ・モードについて （Fantom-X6/X7/X8 をお使いのお客様へ） 1. Piano Mode（ Classic Clav）画面で［F2］ を押して、以下の 画面を表示させます。 fig.
16 * 04232245 - 02 * 04232245 ’06-05-2N Fantom-S/S88 users If the instrument in which you want to install the SRX-12 is running system program version 1.
An important point after buying a device Roland SRX-12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roland SRX-12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roland SRX-12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roland SRX-12 you will learn all the available features of the product, as well as information on its operation. The information that you get Roland SRX-12 will certainly help you make a decision on the purchase.
If you already are a holder of Roland SRX-12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roland SRX-12.
However, one of the most important roles played by the user manual is to help in solving problems with Roland SRX-12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roland SRX-12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
