Instruction/ maintenance manual of the product PD-105X Roland
Go to page of 13
* 5100007588 - 01 * PD-125X_125XS_105X_e.book 1 ページ ２００９年５月１８日 月曜日 午前９時２３分.
2 USING THE UNIT SAFELY 002b • Do not open or perform any internal modifications on the unit. (The only exception would be where this manual provides specific instructions which should be followed in order to put in place user-installable options.) .
3 IMPORTANT NOTES Placement 354a • Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit.
4 • Snare/tom pad with mesh head allowing for excellent feel, dynamics and low level acoustics sound. • Rim shots and playing with brushes is possible. • The pad can mount on a V-Drums drum stand and/or commercially available tom stands (vertical rod type or horizontal pipe type p.
5 The PD-125XS (dedicated snare pad) has no mounting bracket so can only be used with a snare stand. Make sure that the snare stand you are using is able to support a 12-inch shell. The PD-125X/105X can be attached to a stand that has either a vertical rod or a horizontal pipe.
6 Use the included stereo cables to connect pads to your percussion sound module (sold separately). Connect the L-shaped end of the cable to the pad’s OUTPUT jack. Using a monaural cable will NOT allow rim shots or positional sensing. Refer to the table below for details on trigger inputs of sound modules supporting rim shots.
7 Before playing you must adjust the pad tension first. You can tune/adjust the head tension as you would with an acoustic drum, to get the same dynamic “feel.” The pad will function at it’s best if you are sure to: • Adjust the head evenly so that it does not sag.
8 • Applying excessive force to the sensor located under the head can damage it and/or interfere with accurate triggering. • Be careful not to hurt your fingers on the corners or points of the metal parts. 1. Loosen all tuning bolts, and remove the hoop and head.
9 9. Install the frame in the shell. The frame’s output jack will be pointing in the same direction as the bracket. 10. Attach the hoop and head, and tighten the tuning bolts. 11. Adjust the tension of the head. Refer to “Adjusting the Head Tension” (p.
10 Head shots fig.Head.e Only playing the head and with certain snare sounds, the playing position will change the sound’s nuance. See the TD-20X/TDW-20/TD-20/TD-12 owner’s manual for more info about which sounds allow this. Rim shots fig.Rim.e Strike the head and the rim of the pad simultaneously.
11 PD-125XS/PD-125X/PD-105X: V-Pad In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
WARNING This product contains chemicals known to cause cancer, birth defects and other reproductive harm, including lead. For C.A. US ( Proposition 65 ) For China For EU Countries PD-125X_125XS_105X_e.
AFRICA EGYPT Al Fanny Trading Office 9, EBN Hagar Al Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: (022)-417-1828 REUNION Maison FO - YAM Marcel 25 Rue Jules Hermann, Chaudron - BP79 97 491 Ste Clotilde Cedex, REUNION ISLAND TEL: (0262) 218-429 SOUTH AFRICA T.
An important point after buying a device Roland PD-105X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roland PD-105X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roland PD-105X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roland PD-105X you will learn all the available features of the product, as well as information on its operation. The information that you get Roland PD-105X will certainly help you make a decision on the purchase.
If you already are a holder of Roland PD-105X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roland PD-105X.
However, one of the most important roles played by the user manual is to help in solving problems with Roland PD-105X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roland PD-105X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
