Instruction/ maintenance manual of the product MICRO CUBE Guitar Amplifier Roland
Go to page of 12
Owner’s Manual Thank you, and congratulations on your choice of the Roland MICRO CUBE Guitar Amplifier. Before using this unit, carefully read the sections entitled: • USING THE UNIT SAFELY (p. 2–4) • IMPORTANT NOTES (p. 5) These sections provide important information concerning the proper operation of the unit.
2 USING THE UNIT SAFELY 001 • Before using this unit, make sure to read the instructions below, and the Owner’s Manual. .................................................................................................. 002c • Do not open (or modify in any way) the unit or its AC adaptor.
3 010 • This unit, either alone or in combi- nation with an amplifier and headphones or speakers, may be capable of producing sound levels that could cause permanent hearing loss. Do not operate for a long period of time at a high volume level, or at a level that is uncomfortable.
4 101b • The unit and the AC adaptor should be located so their location or position does not interfere with their proper ventilation. ..............
5 IMPORTANT NOTES 291a In addition to the items listed under “USING THE UNIT SAFELY” on page 2–4, please read and observe the following: Power Supply: Use of Batteries 301 • Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system).
6 Panel Descriptions 1. INPUT Jack Connect your guitar or microphone here. 2. Type Switch You can select from the following seven amp types: ACOUSTIC This original amplifier model gives you a dynamic acoustic guitar sound using a standard electric guitar.
7 Panel Descriptions 3. GAIN Knob Adjusts the sensitivity at the input jacks. 4. VOLUME Knob Adjusts the volume. 5. Power Indicator This indicator lights when the unit is turned on. * When operating on battery power only, the unit's indicator will become dim during play when battery power gets too low.
8 Panel Descriptions 11. REC OUT/PHONES Jack When Using REC OUT Use mono 1/4” phone plugs when connecting to this jack. Use the VOLUME knob ( 4 ) to adjust the volume of the signal output from REC OUT to the appropriate level. When Using PHONES Connect headphones to this jack.
9 Panel Descriptions Connecting the AC adaptor Use only the AC adaptor included with the MICRO CUBE. Use of other AC adaptors may damage the amp or result in other problems.
10 Main Specifications ● Rated Power Output 2 W ● Nominal Input Level INPUT: -10 dBu AUX IN: -10 dBu *0 dBu = 0.775 Vrms ● Speaker 12 cm (5 inches) x 1 ● Controls TYPE Switch GAIN Knob VOLUME .
This product complies with the requirements of European Directive 89/336/EEC. For EU Countries For Canada This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. As of November 1, 2003 (Roland) ARGENTINA Instrumentos Musicales S.
An important point after buying a device Roland MICRO CUBE Guitar Amplifier (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roland MICRO CUBE Guitar Amplifier yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roland MICRO CUBE Guitar Amplifier - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roland MICRO CUBE Guitar Amplifier you will learn all the available features of the product, as well as information on its operation. The information that you get Roland MICRO CUBE Guitar Amplifier will certainly help you make a decision on the purchase.
If you already are a holder of Roland MICRO CUBE Guitar Amplifier, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roland MICRO CUBE Guitar Amplifier.
However, one of the most important roles played by the user manual is to help in solving problems with Roland MICRO CUBE Guitar Amplifier. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roland MICRO CUBE Guitar Amplifier along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
