Instruction/ maintenance manual of the product gp-7 Roland
Go to page of 14
Digital Piano Model: V-Piano Grand Date: Jun. 1, 2011 Version: 1.00 1 (GP-7) MIDI Implementation 1. Receive data * “†” marked parameters are recognized by only GM2 sound generator. ■ Channel Voice Messages ● Note off Status 2nd byte 3rd byte 8nH kkH vvH 9nH kkH 00H n = MIDI channel number: 0H - FH (ch.
2 MIDI Implementation ❍ Resonance (Controller number 71) † Status 2nd byte 3rd byte BnH 47H vvH n = MIDI channel number: 0H - FH (ch.1 - 16) vv= Resonance value (relative change): 00H - 7FH (-64 - 0 - +63) ❍ Release Time (Controller number 72) † Status 2nd byte 3rd byte BnH 48H vvH n = MIDI channel number: 0H - FH (ch.
3 MIDI Implementation ■ Channel Mode Messages ● All Sounds Off (Controller number 120) Status 2nd byte 3rd byte BnH 78H 00H n = MIDI channel number: 0H - FH (ch.1 - 16) * When this message is received, all notes currently sounding on the corresponding channel will be turned off.
4 MIDI Implementation ❍ GM System Off † Status Data byte Status F0H 7EH, 7F, 09H, 02H F7H Byte Explanation F0H Exclusive status 7EH ID number (Universal Non-realtime Message) 7FH Device ID (Broadc.
5 MIDI Implementation ❍ Channel Pressure † Status Data byte Status F0H 7FH, 7FH, 09H, 01H, 0nH, ppH, rrH F7H Byte Explanation F0H Exclusive status 7FH ID number (universal realtime message) 7FH De.
6 MIDI Implementation ❍ Data set 1 (DT1) This is the message that actually performs data transmission, and is used when you wish to transmit the data.
7 MIDI Implementation ● Active Sensing Status FEH * This message is transmitted at intervals of approximately 250 msec. ■ System Exclusive Messages Universal Non-realtime System Exclusive Message and Data Set 1 (DT1) are the only System Exclusive messages transmitted by the V-Piano Grand.
8 MIDI Implementation | | | A0 - C8 | |# 01 76 | 0000 0000 | | | | 0aaa aaaa | Tone EQ Zone 3 Key Upper (21 - 108) | | | | A0 - C8 | |# 01 78 | 0000 0000 | | | | 000a aaaa | Tone EQ Zone 3 Frequency (.
9 MIDI Implementation | 00 19 | 000a aaaa | System Center Pedal Assign 2 (0 - 17) | | | | OFF, SOFT, SOSTENUTO, | | | | MASTER VOLUME, EXPRESSION, | | | | AMBIENCE LEVEL, | | | | SOUND LIFT, STRING RE.
10 MIDI Implementation | | | DECAY TIME, TONE COLOR, | | | | DAMPING TIME, DAMPER NOISE LEVEL | | 01 22 | | <Reserved> | | 01 23 | | <Reserved> | | 01 24 | 000a aaaa | Setup FC2 Assign 2 (.
11 MIDI Implementation ■ Decimal and Hexadecimal Table (An “H” is appended to the end of numbers in hexadecimal notation.) In MIDI documentation, data values and addresses/sizes of Exclusive messages, etc. are expressed as hexadecimal values for each 7 bits.
12 MIDI Implementation ■ Example of an Exclusive Message and Calculating a Checksum Roland Exclusive messages (RQ1, DT1) are transmitted with a checksum at the end (before F7) to make sure that the message was correctly received. The value of the checksum is determined by the address and data (or size) of the transmitted Exclusive message.
13 Function... Basic Channel Mode Note Number : Velocity After Touch Pitch Bend Control Change Transmitted Recognized Remarks Default Changed Default Messages Altered True Voice Note On Note Off Key.
14 Correspondence Between Preset Tones and Program Changes To select any of the sounds listed below, transmit the relevant Program Change on the channel that's been set for V-Piano Rx Channel (default value: ch.
An important point after buying a device Roland gp-7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roland gp-7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roland gp-7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roland gp-7 you will learn all the available features of the product, as well as information on its operation. The information that you get Roland gp-7 will certainly help you make a decision on the purchase.
If you already are a holder of Roland gp-7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roland gp-7.
However, one of the most important roles played by the user manual is to help in solving problems with Roland gp-7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roland gp-7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
