Instruction/ maintenance manual of the product ND4-XFM Rockford Fosgate
Go to page of 14
® ® AUDIO phile 1" NEODYMIUM TWEETER WITH HIGH P ASS CROSSOVER ND4-XFM & ND8-XFM Owner's Manual.
Dear Customer, Congratulations on your purchase of America ’ s finest brand of car audio components. At Rockford Fosgate we are committed to musical reproduction at its best, and we are pleased you chose our product.
T ABLE OF CONTENTS Specifications ................................................................................... 1 ND4-XFM / ND8-XFM Neodymium Tweeter Contents ..................... 1 Introduction .................................................
SPECIFICA TIONS ND4 Power Rating 50 Watts Impedance with crossover 4 Ω Sensitivity with input of 1 Watt measured at 1 meter 91dB Resonance Frequency 1,500Hz Frequency Response 3,000 - 20,000Hz ND8 P.
INTRODUCTION DESIGN AND FEA TURES Input and Output Connectors Mounting the TX-184N / 188N This manual provides information on the features and installation of the ND4 and ND8 Neodymium Tweeters and high pass crossovers. We suggest you save this manual for future reference.
ND4 AND ND8 NEODYMIUM TWEETERS ing holes on either side of the enclosure. The ND4 and ND8 Neodymium Tweeters are designed for optimum smooth frequency response. This goal, as with all other Rockford Fosgate products, is achieved by utilizing "high quality, high-end" components.
Front View Key hole pointing up Back View Bend out tabs to hold mounting cup in place Key turned and locked Hook up wires Exploded View Tweeter Flush Mount Cup Bend out holding tabs Mounting Hole Speaker Wires FLUSH MOUNTING THE ND4 /ND8 TWEETERS The following instructions explain how to mount the ND4/ND8 Tweeters in a flush mount application.
SURF ACE MOUNTING THE ND4 /ND8 TWEET - ERS The following instructions explain how to surface mount the ND4/ND8 Tweeters. 1. Place the mounting plate on the surface that the tweeter will be mounted to. Mark two (2) oppos- ing mounting holes and the center wire access hole.
WIRING THE ND4/ND8 NEODYMIUM TWEETER + – + – TX184N/188N Input Output Input from Amplifier T o ND4/ND8 > > > > – + lock in place. Note: The color coded wire is connected to the posit.
REPLACING THE ND4/ND8 DOME both the ND4 and ND8. 1. Gently remove tweeter assembly from mounted location. 2. Disconnect the tweeter wire harness, at the .110 Fastons end, from the filter network wire har- ness. 3. Remove the "strain relief clip" from the back of the tweeter assembly.
dome. 3. Once the replacement Coil/Dome Assembly and Magnet Enclosure are together, gently pull the voice coil wires extending out from the bottom of the Magnet Enclosure until any extra slack has been eliminated. Wrap the voice coil wires around the edge of the Magnet Enclosure away from the metal parts.
9 ND4/ND8 NEODYMIUM ASSEMBL Y DIAGRAM.
Rockford Fosgate warrants all loudspeakers to the original purchaser for a period of two (2) years parts and labor, providing the product was purchased from an Authorized Rockford Fosgate Dealer.
Rockford Fosgate A Division of Rockford Corporation 546 South Rockford Drive Tempe, Arizona 85281 U.S.A. In U.S.A. (602) 967-3565 In Canada, call Korbon (416) 567-1920 In Europe, Fax (49) 4207-801250 .
An important point after buying a device Rockford Fosgate ND4-XFM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Rockford Fosgate ND4-XFM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Rockford Fosgate ND4-XFM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Rockford Fosgate ND4-XFM you will learn all the available features of the product, as well as information on its operation. The information that you get Rockford Fosgate ND4-XFM will certainly help you make a decision on the purchase.
If you already are a holder of Rockford Fosgate ND4-XFM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Rockford Fosgate ND4-XFM.
However, one of the most important roles played by the user manual is to help in solving problems with Rockford Fosgate ND4-XFM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Rockford Fosgate ND4-XFM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
