Instruction/ maintenance manual of the product Revival RD-60 Roberts
Go to page of 24
DAB/FM RDS digital radio model RD-60 Please read this manual before use ROBER TS Sound for Generations.
Controls .......................................................................2-3 Battery operation ............................................................ 4 Using the AC adaptor ..................................................... 4 Operating your radio - DAB .
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 2 Controls 1. Low battery indicator 2. V olume control 3. Headphone socket 4. Auxiliary Input socket 5. T elescopic aerial (T op) 2 3 7 9 10 5 12 1 1. Preset button 12.
3 Controls 14. DC in socket 15. Line output socket 15 14.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 4 Battery operation 1. Release the catch securing the rear door of your radio. 2. Insert four LR20 (D size) batteries into the spaces in the compartment.
5 2 Operating your radio - DAB 1. Carefully extend the telescopic aerial. 2. Press the On/Off button to switch on your radio. The display will show "Welcome to DAB". 3. If this is the fi rst time the radio is used a quick scan of the UK Band III DAB channels will be carried out.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Selecting a station - DAB 1. The top line of the display shows the name of the station currently selected. 2. Rotate the Tuning control to scroll through the list of available stations on the lower line of the display .
7 1 Display modes - DAB Y our radio has seven display modes:- 1. Press the Info button to cycle through the various modes. a. Scrolling text Displays scrolling text messages such as artist/track name, phone in number etc. b. Program T ype Displays the type of station being listened to e.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 8 Finding new radio stations - DAB As time passes new stations may become available. T o fi nd new stations proceed as follows:- 1. Press and release the Auto Tune button.
9 Manual T uning - DAB Manual tuning allows you to tune directly to the various DAB Band III channels. UK DAB stations located in the range 1 1B to 12D. 1. Press and hold in the Info button until the display shows "Manual tune". Press and release the Tuning control to select this function.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 10 1 Dynamic Range Control settings - DAB Dynamic Range Control (also known as DRC) can make quieter sounds easier to hear when your radio is used in a noisy environment.
11 2 3 4-7 9 Operating your radio - Search tuning - FM 1. Carefully extend the telescopic aerial fully . 2. Press the On/Off button to switch on your radio.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Manual tuning - FM 1. Press the On/Off button to switch on your radio. 2. Press the Band button to select the FM band. Carefully extend the telescopic aerial fully for FM reception.
13 Display modes - FM In FM mode the bottom line of the display can be set to any of the following display options:- 1. Press the Info button to cycle through each of the options. a. Scrolling text Displays scrolling text messages such as artist/track name, phone in number etc.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 14 Favourite button Y our radio is fi tted with a button which when pressed will automatically select the required waveband and tune to your Favourite radio station.
15 Preset stations - DAB and FM T o make it easier for you to tune your radio to the stations that you prefer , you may store selected radio stations as presets. Y our radio holds presets separately for DAB and FM radio modes. Y ou may set as many or as few presets as you like in each mode.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 16 FM Stereo/Mono 1. If a station being received is weak some hiss may be audible (especially when listening using headphones). T o reduce this, press and release the Tuning control so that the display shows "Switching to Mono".
Scan sensitivity setting - FM Y our radio will normally scan for FM broadcasts which are strong enough to give good reception. However , you may wish the Auto-scan function to also be able to fi nd weaker signals, possibly from more distant radio transmitters.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Software version The software display cannot be altered and is just for your reference. 1. T o view the software version on the display , ensure your radio is in DAB mode and press and hold the Info button for 2 seconds.
2,3 System reset If your radio fails to operate correctly , or some digits on the display are missing or incomplete, it may be possible to restore normal operation by carrying our a System Reset operation on your radio. This will restore the radio's settings to their factory defaults.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 20 Headphone socket A 3.5mm Headphone Socket located on the top left hand corner of your radio is provided for use with either headphones or an earpiece.
21 Line out socket A 3.5mm stereo Line out socket located on the rear of your radio is provided for connecting the audio signal to an external amplifi er . Inserting a line out audio cable will not mute the internal loudspeaker . Set the volume control on the radio to minimum if desired.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 22 Circuit Features Loudspeaker 75mm full range Output Power 1.0 Watt Headphone socket 3.5mm dia. Auxiliary Input socket 3.5mm dia. Line out socket 3.5mm dia.
ROBERTS RADIO TECHNICAL SER VICES 97-99 Worton Road Isleworth Middlesex TW7 6EG T echnical Helpline :- 020 8758 0338 (Mon-Fri during offi ce hours) http://www .
An important point after buying a device Roberts Revival RD-60 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roberts Revival RD-60 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roberts Revival RD-60 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roberts Revival RD-60 you will learn all the available features of the product, as well as information on its operation. The information that you get Roberts Revival RD-60 will certainly help you make a decision on the purchase.
If you already are a holder of Roberts Revival RD-60, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roberts Revival RD-60.
However, one of the most important roles played by the user manual is to help in solving problems with Roberts Revival RD-60. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roberts Revival RD-60 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
