Instruction/ maintenance manual of the product CR9976 Roberts Radio
Go to page of 24
CR9976 Auto Set Dual Alarm CD Clock Radio Please read this manual before use ROBER TS Sound for Generations cr9976 instruction book.PMD 3/16/2004, 1:17 PM 1.
Contents ............................................................................ 1 Controls .......................................................................... 2 -3 Switc hing o n ...........................................................
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 2 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 18 19 20 21 10 1. Snooze button 2. Stop button 3. CD mode/Year button 4. Repeat/Week button 5. CD display/Date button 6.
3 Controls 26. Tuning control 27. Function switch 28. Volume control 22. Alarm 1 function switch 23. Alarm 2 function switch 24. Alarm mode switch 25. Headphone socket 22 23 24 25 26 27 28 cr9976 instruction book.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 4 Switching on 1. Place your CD clock radio on a flat surface. Plug the power cord into the wall socket and switch on. 2. After a few seconds the time, day, date and year will set automati- cally.
5 Setting the year 1. Ensure that power is switched off - Power indicator not lit 2. Press and hold down the CD Mode/YEAR button . 3. Whilst holding down the CD Mode/YEAR button set the year using the UP/F.Skip or DOWN/B.Skip buttons 3 3 1 Setting the date 1.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Checking the date 1. Ensure that your CD clock radio is switched off (power indicator not lit) 2. Press and hold down the CD Display/DATE button , the display will change to showing current date.
7 Setting alarm times The alarms can be set to wake you by a buzzer, CD or the radio. Your CD clock radio has two separate alarms which can be set to activate at different times. Setting alarm 1 1. Slide the Alarm 1 function switch to the 'Adj' position.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 8 Setting the alarm mode Your clock radio has five different alarm modes for each of the alarms.
9 Checking the Alarm Times 1. To check alarm 1 time, set the Alarm 1 function switch to the 'Adj' position. Alarm 1 time will appear in the display. 2. Return the Alarm 1 function switch to the 'Off' position. The display will revert to showing time.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 10 Listening to the Radio 1. Switch on your CD clock radio by pressing the Power button . The Power indicator LED will light. 2. Slide the Function switch to the required waveband.
11 Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up. To remove dust and dirt, breathe on the CD and wipe it with a soft, lint- free cloth in a straight line from the centre towards the edge.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Playing a CD 1. Whilst the CD is in stop mode press the Play/Pause button to start playback. The display will show the track number. After a short time the display will revert to showing time.
13 Selecting a track 1. Whilst the CD is playing, press either the UP/F.skip or Down/B.skip buttons to change to the desired track. You can also skip tracks when the player is in stop mode. Skip to the desired track using the UP/F.skip or Down/B.skip buttons .
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 14 CD Mode Your CD clock radio has three CD play modes: Normal, Random and Memory.
15 Programmed play By programming the player you can play up to 20 tracks in any desired order. 1. Whilst the CD is in STOP mode, press the Memory/TIME ZONE button . The display will show ‘ P 01’. 2. Select the first track using the UP/F.skip or Down/B.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 16 Setting the alarms to wake to buzzer 1. Set the alarm time as previously described and ensure alarm mode is set for correct days of week. Set the Alarm function switch to the 'Buzz' position.
17 Setting the alarms to wake to CD 1. Set the alarm time as previously described. Set the Alarm function switch to the 'Music' position. 2. Set the Alarm 1 or Alarm 2 selector switch to the 'On' position. The Alarm indicator will light.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Snooze control 1. The CD radio or buzzer alarm can be silenced for 9 minutes by pressing the Snooze button . This sequence can be repeated whilst the alarm is sounding.
19 Backup battery As with all batteries, eventually the built in lithium battery will need to be replaced. A number of factors, such as the length of time between the date your clock radio was manufactured and the date you plugged it in for the first time, determine the amount of time before replacement.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 20 Changing the backup battery 1. Purchase a replacement lithium backup battery type CR2032 or equivalent. 2. Remove the fresh battery from its packaging so that it is ready to install.
21 Specifications Power Requirements Ma in s AC 230 volts, 50Hz only Back-up Battery CR2032 Lithium (2-5year life) Frequency Coverage F M 87.5 - 108MHz M W 520 - 1610kHz Circuit Features Loudspeakers .
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363). If another type of plug is used a 5A fuse should be fitted in the plug, adaptor or distribution board.
ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below.
An important point after buying a device Roberts Radio CR9976 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roberts Radio CR9976 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roberts Radio CR9976 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roberts Radio CR9976 you will learn all the available features of the product, as well as information on its operation. The information that you get Roberts Radio CR9976 will certainly help you make a decision on the purchase.
If you already are a holder of Roberts Radio CR9976, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roberts Radio CR9976.
However, one of the most important roles played by the user manual is to help in solving problems with Roberts Radio CR9976. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roberts Radio CR9976 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
