Instruction/ maintenance manual of the product CR9970 Roberts Radio
Go to page of 24
CR9970 Dual Alarm CD Clock Radio Please read this manual before use ROBER TS Sound for Generations cr9970 instruction book.PMD 6/11/2004, 10:57 AM 1.
2 Contents ............................................................................ 2 Controls .......................................................................... 3- 4 Switching on and setting the time .................................... 5 Listening to the radio .
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 3 Controls Front 1. Stop button 2. Repeat button 3. Snooze button 4. B.Skip button 5. Time Set button 11. Low Battery LED 12. Clock/CD Display 13. Play/Pause button 14.
4 Controls 25. Alarm 1 function switch 26. Alarm 2 function switch 27. Dimmer switch 28. Alarm Mode switch 29. CD Door handle 30. Tuning control 31. Function switch 32. Volume control 33. Battery compartment (on underside) 25 26 27 28 29 30 31 32 Left hand side Right hand side 33 cr9970 instruction book.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 5 Switching on and setting the time Before using your CD clock radio you must first set the correct time. 1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on at the wall socket.
6 Listening to the Radio 1. Switch on your CD clock radio by pressing the Power On button . The Power indicator LED will light. 2. Slide the Function switch to the required waveband. 3. Tune in to the desired station by rotating the Tuning control . The station frequency is indicated in the dial scale.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 7 Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up.
8 Inserting a CD 1. Press the Power On button to switch on your CD clock radio. The Power indicator will light. 2. Set the Function switch to CD. 3. To open the CD compartment, lift the CD door by the handle as shown. 4. Press the CD onto the spindle and close the CD door .
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 9 Playing a CD 1. Press the Play/Pause button to start playback. The Play indicator will light. The display will show the track number. 2. Set the Volume control to the required setting.
10 Selecting a track 1. Whilst the CD is playing, press either the F.skip or B.skip buttons to change to the desired track. You can also skip tracks when the player is in stop mode. Skip to the desired track using the F.skip or B.skip buttons. 2. Press the Play/Pause button to play the selected track.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 11 CD repeat mode 1. Whilst the CD is playing press the Repeat button once to repeat the current track. The Repeat indicator will flash. 2. Press the Repeat button again to repeat all tracks on the CD.
12 Programmed play By programming the player you can play up to 20 tracks in any desired order. 1. Whilst the CD is in Stop mode, press the Program button . The display will show ‘01’ and the Program indicator will flash. 2. Select the first track you wish to play using the F.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 13 1 Erasing a programme 1. Programmes are erased by opening the CD door , changing position of the Function switch , pressing the Power Off button , or interrupting the mains supply.
14 Setting the alarm times The alarms can be set to wake you by a buzzer, CD or the radio. Your CD clock radio has 2 separate alarms which can be set to activate at different times. Setting Alarm 1 1. Slide the Alarm 1 function switch to the 'Adj' position.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 15 Checking the Alarm Times 1. To check Alarm 1 time, set the Alarm 1 function switch to the 'Adj' position. Alarm 1 time will show in the display.
16 Setting the alarms to wake to buzzer 1. Set the alarm time as previously described. Set the Alarm mode switch to the 'Buzz' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position. The corresponding Alarm indicator will light.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 17 Setting the alarms to wake to radio 1. Set the alarm time as previously described. Set the Alarm Mode switch to the 'Music' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position.
18 Setting the alarms to wake to CD 1. Set the alarm time as previously described. Set the Alarm Mode switch to the 'Music' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position. The corresponding Alarm indicator will light.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 19 Snooze control 1. The buzzer, CD or radio alarm can be silenced for 7 minutes by pressing the Snooze button. This sequence can be repeated during the 60 minute alarm period.
20 Dimmer 1. The Dimmer switch, located on the left side of your clock radio, can adjust the intensity of the clock display to suit room brightness. Slide the Dimmer switch to either the High or Low setting to change the display brightness. 1 1 Changing the back up battery 1.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 21 The Company reserves the right to amend the specification without notice. Specifications Power Requirements Mains AC 230 volts, 50Hz only Back-up Battery IEC size 6LR61 (6F22, PP3) Frequency Coverage F M 87.
22 Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363). If another type of plug is used a 5A fuse should be fitted in the plug, adaptor or distribution board.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 23 Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below.
ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 cr9970 instruction book.
An important point after buying a device Roberts Radio CR9970 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roberts Radio CR9970 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roberts Radio CR9970 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roberts Radio CR9970 you will learn all the available features of the product, as well as information on its operation. The information that you get Roberts Radio CR9970 will certainly help you make a decision on the purchase.
If you already are a holder of Roberts Radio CR9970, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roberts Radio CR9970.
However, one of the most important roles played by the user manual is to help in solving problems with Roberts Radio CR9970. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roberts Radio CR9970 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
