Instruction/ maintenance manual of the product CR9934 Roberts Radio
Go to page of 16
CR9934 PLL Dual Alarm Clock Radio Please read this manual before use ROBER TS Sound for Generations.
Contents ............................................................................ 1 Controls .......................................................................... 2- 3 Display ..................................................................
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 2 Controls (Top) 1. Preset buttons 2. Weekend cancel button 3. On/Off button 4. Memory button 1 9. Night Light button 10. Band button 11. Sleep button 12.
3 Controls (Left side) 19 . Volume control 20 . Battery compartment (underside) 21 . Reset button (inside battery compartment) 17 19 (Right side) 17. Headphone socket 18.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 4 1. Alarm 2 indicators 2. Alarm 1 indicators 3. Sleep indicator 4. Weekend cancel indicator 5. Days of week indicators 6. Memory preset indicators 7. Frequency indicators 8.
5 Connecting to mains supply 1. Place your radio on a flat surface. 2. Plug the mains plug into a wall socket and switch on the wall socket. Display backlight The display backlight can also be set to 3 different levels, Lo, Med and Hi. 1. Slide the Dimmer switch located on the underside of your clock radio to the required position.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Setting the clock 1. Press and hold down the Time button . 2. Whilst the Time button is held down set the time by pressing the Up or Down buttons . The clock uses the 24 hour system e.
7 Setting the alarm times 1. Press and hold down the Alarm 1 or Alarm 2 buttons . 2. Whilst the Alarm 1 or Alarm 2 button is held down set the alarm time by pressing the Up or Down buttons . The clock uses the 24 hour system e.g. 2:30pm is shown as 14:30.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 8 Snooze control 1. The radio or buzzer alarm can be silenced for 5 minutes by pressing the Snooze button . This sequence can be repeated during the 90 minutes alarm period.
9 Operating your radio - search tuning 1. Switch on your clock radio by pressing the On/Off button. 2. Select the required waveband by pressing the Band button . The waveband selected will appear in the display. On FM fully extend the pigtail aerial from the rear of your clock radio.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 10 Operating your radio - manual tuning 1. Switch on your radio by pressing the On/Off button . 2. Select the required waveband by pressing the Band button .
11 Pre-setting stations You may store up to 10 different stations on FM and 5 for MW giving a total of 15 preset stations. 1. Switch on your radio using the On/Off button . 2. Select the desired waveband using the Band button . 3. Tune into the required station using one of the tuning methods previously described.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Recalling a preset station 1. Switch on your radio using the On/Off button . 2. Select the desired waveband using the Band button. 3. Press one of the Preset buttons to recall the station.
13 Headphones 1. A Headphone Socket (3.5mm) located on the left hand side of your radio is provided for use with either headphones or an earpiece. Inserting the headphone plug automatically mutes the internal loudspeaker.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 14 Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363). If another type of plug is used a 5A fuse should be fitted in the plug, adaptor or distribution board.
Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free of charge.
An important point after buying a device Roberts Radio CR9934 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roberts Radio CR9934 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roberts Radio CR9934 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roberts Radio CR9934 you will learn all the available features of the product, as well as information on its operation. The information that you get Roberts Radio CR9934 will certainly help you make a decision on the purchase.
If you already are a holder of Roberts Radio CR9934, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roberts Radio CR9934.
However, one of the most important roles played by the user manual is to help in solving problems with Roberts Radio CR9934. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roberts Radio CR9934 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
