Instruction/ maintenance manual of the product CR9923 Roberts Radio
Go to page of 12
88 92 MHz 540 600 kHz CR 9923 2 Band Clock Radio PM TUNING FM MW ROBER TS Sound for Generations CR9923 2 Band Single Alarm Clock Radio Please read this manual before use.
TIME SLEEP ALARM/ OFF Minute Hour SNOOZE 1 1. Alarm set/off button. 2. Sleep button. 3. Minute button. 4. Hour button. 5. Time set button. 6. Snooze. Controls (top) 1 23 5 4 6.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 88 92 MHz 540 600 kHz CR 9923 2 Band Clock Radio PM TUNING FM MW 6.
9 10 9. Function switch. 10. Dimmer switch. 1 1. W aveband switch. 12. V olume control. 13. Battery compartment Controls (left and right side) 3 Low High On Off Radio Buzz DIMMER MW FM VOLUME 11 12 13.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) Switching on 1. Place your clock radio on a flat surface. Plug the power cord into the wall socket and switch on. The clock display will flash 12.00. Setting the time 1.
5 Listening to the Radio 1. Switch on the radio by sliding the Function switch to the 'On' position. 2. Select the required waveband using the Waveband selector switch . 3. Tune in to the desired station by rot ating the Tuning control . The Wire aerial located on the rear of your clock radio is for FM reception.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Setting alarm time 1. Press and hold down the ALARM/OFF button . 2. Whilst holding down the ALARM/OFF button press the Hour or Minute buttons to set the time.
7 Setting the alarm to wake to buzzer 1. Set the alarm time as previously described. Set the Function switch to the 'Buzz' position. The Alarm indicator will light. The alarm will sound every day at the preset time for 1 hour 59 minutes. T o switch of f the alarm until the next day press the ALARM/ OFF button .
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 8 Snooze control 1. The radio or buzzer alarm can be silenced for 9 minutes by pressing the SNOOZE button. This sequence can be repeated whilst the alarm is sounding.
9 Dimmer Switch The DIMMER switch located on the left side of your clock radio will allow you to adjust the intensity of the clock display to suit room brightness. Low High DIMMER S pecifications Power Requirement s Mains : AC 230 volts, 50Hz only Back-up Battery : IEC size 6LR61 (6F22, PP3) Frequency Coverage FM 87.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 10 Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363). If another type of plug is used a 5A fuse should be fitted in the plug, adaptor or distribution board.
Issue 1 ROBERTS RADIO TECHNICAL SER VICES DEP ARTMENT 97-99 Worton Road Isleworth Middlesex TW7 6EG T echnical Helpline :- 020 8758 0338 (Mon-Fri during office hours) This clock radio is guaranteed fo.
An important point after buying a device Roberts Radio CR9923 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roberts Radio CR9923 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roberts Radio CR9923 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roberts Radio CR9923 you will learn all the available features of the product, as well as information on its operation. The information that you get Roberts Radio CR9923 will certainly help you make a decision on the purchase.
If you already are a holder of Roberts Radio CR9923, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roberts Radio CR9923.
However, one of the most important roles played by the user manual is to help in solving problems with Roberts Radio CR9923. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roberts Radio CR9923 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
