Instruction/ maintenance manual of the product CR9919 Roberts Radio
Go to page of 16
CR9919 time cube time cube time cube time cube time cube clock radio with atomic clock accuracy Please read this manual before use ROBER TS Sound for Generations Weekend Ca ncel MSF S ignal Auto Summe.
Controls (top) 1 1 6 Tim e Date Snooze On/O ff Sleep Weeken d Cance l Rever se Fo rward 1 2 Vol u me 2 3 4 5 7 8 9 10 11 1. On/Off button 2. Sleep button 3. Time button 4. Week end cancel button 5. Volume control 6. Headphone socket (on rear) 7. Alarm 2 button 8.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 2 12. Alarm 2 indicator 13. Auto dimmer 14. Alarm 1 indicator 15.
Buz z Off 1 Radi o Buz z Off 2 Radi o 19 20 19. Alarm 1 function switch 20. Alarm 2 function switch Controls (left side) 3.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Tu n i ng MW FM 21 21. Waveband switch 22. Tuning control 23.
5 Automatic clock setting 1. When switched on the Time Capsule will receive and synchronise your clock radio to one of the most accurate clocks in the world. The signal is received from the official UK standard frequency and time signal transmitter (MSF) located at Rugby in the U.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) ON Switching on 1. Place your clock radio on a flat surface. Plug the mains lead into a wall socket and switch on. Note your clock radio will not switch on until the clock has been set.
7 Setting the time manually (only necessary if the MSF signal is not available) 1. To set the time, press and hold down the Time button and adjust using the Forward button or Reverse button until the correct time appears. The clock uses a 24 hour display.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Listening to the Radio 1. Switch on the radio by pressing the On/Off button . The LED dial pointer will light up indicating that the radio is switched on.
9 Setting alarm times Your alarm clock radio has two separate alarms which can be set to activate at different times. The alarms can be set to wake you by either the buzzer or the radio. In the event of a power failure the backup battery will ensure that the alarm sounds at the preset time.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Checking the Alarm Times 1. To check alarm 1 time, press the Alarm 1 button ( 1 ) the display will show alarm 1 time whilst the button is held down.
11 Snooze control The radio or buzzer alarms can be silenced for 5 minutes by pressing the Snooze button. This sequence can be repeated during the alarm cycle (60 min). Setting the alarms to wake to radio 1. Set the alarm time as previously described.
Alarm weekend cancel The alarms can be automatically cancelled at weekends. 1. To enable the weekend cancel function, press the Weekend cancel button . The Weekend cancel indicator will light up in the display. 2. Press the Weekend cancel button again to turn off the indicator and disable this function.
Specifications Power Requirements Mains AC 230 volts, 50Hz only Back-up Battery IEC size 6LR61 (6F22, PP3) Frequency Coverage FM 87.5 - 108MHz MW 525 - 1610kHz Circuit Features Loudspeaker 75mm diamet.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363). If another type of plug is used a 5A fuse should be fitted in the plug, adaptor or distribution board.
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 Guarantee This instrument is guaranteed for twelve months.
An important point after buying a device Roberts Radio CR9919 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roberts Radio CR9919 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roberts Radio CR9919 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roberts Radio CR9919 you will learn all the available features of the product, as well as information on its operation. The information that you get Roberts Radio CR9919 will certainly help you make a decision on the purchase.
If you already are a holder of Roberts Radio CR9919, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roberts Radio CR9919.
However, one of the most important roles played by the user manual is to help in solving problems with Roberts Radio CR9919. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roberts Radio CR9919 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center