Instruction/ maintenance manual of the product CR9916 Roberts Radio
Go to page of 16
CR9916 2 Band Dual Alarm CD Clock Radio Please read this manual before use ROBER TS Sound for Generations St op Power FM St Memo ry Repeat Random Sleep Down/ B.
St op Power FM St Memo ry Repeat Random Sleep Down/ B. skip Rep eat CD mode Up/ F. s k i p Pl ay / Pa use Sleep Snooz e Me mory Po wer CD Disp lay Time Set PM 1 2 Controls 1. CD stop button 2. Track down/minute up button 3. CD repeat button 4. CD mode button 5.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Controls 20 . Alarm 1 function switch 21 . Alarm 2 function switch 22 . Alarm mode switch 23 . Headphone socket 24 . Tuning control 25 . Function switch 26 .
Switching on and setting the time Before using your CD clock radio you must first set the correct time. 1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on. 2. The clock display will show 12:00. Ensure that the Alarm 1 and Alarm 2 function switches are set to the 'Off' position.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Listening to the Radio 1. Switch on your CD clock radio by pressing the Power button . The Power indicator LED will light. 3. Tune in to the desired station by rotating the Tuning control .
Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up. To remove dust and dirt, breathe on the CD and wipe it with a soft, lint-free cloth in a straight line from the centre towards the edge.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Playing a CD 1. Press the Play/Pause button to start playback. The display will show the track number. After a short time the display will revert to showing time.
CD repeat mode 1. Whilst the CD is playing press the Repeat button once to repeat the current track. The Repeat indicator will flash. 2. Press the Repeat button again to repeat all tracks on the CD. The Repeat indicator will light up. 7 Repea t CD mode Repeat CD m ode PM 1 Repeat PM 1 Random CD Random play 1.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Programmed play By programming the player you can play up to 20 tracks in any desired order. 1. Whilst the CD is in STOP mode, press the Memory button . The display will show ‘ P 01’.
Setting alarm times The alarms can be set to wake you by a buzzer, CD or the radio. Your CD clock radio has 2 separate alarms which can be set to activate at different times. Setting alarm 1 1. Slide the Alarm 1 function switch to the 'Adj' position.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Checking the Alarm Times 1. To check alarm 1 time, set the Alarm 1 function switch to the 'Adj' position. Alarm 1 time will flash in the display.
Setting the alarms to wake to radio 1. Set the alarm time as previously described. Set the Alarm function switch to the 'Music' position. Set the Alarm 1 or Alarm 2 selector switch to the 'On' position. The corresponding Alarm indicator will light.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Setting the alarm to wake to CD programme 1. Set the alarm to wake to CD as described above. 2. Programme your favourite tracks as described earlier 3.
Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363). If another type of plug is used a 5A fuse should be fitted in the plug, adaptor or distribution board.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) The Company reserves the right to amend the specification without notice. Specifications Power Requirements Mains AC 230 volts, 50Hz only Back-up Battery IEC size 6LR61 (6F22, PP3) Frequency Coverage FM 87.
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 Guarantee This instrument is guaranteed for twelve months.
An important point after buying a device Roberts Radio CR9916 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roberts Radio CR9916 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roberts Radio CR9916 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roberts Radio CR9916 you will learn all the available features of the product, as well as information on its operation. The information that you get Roberts Radio CR9916 will certainly help you make a decision on the purchase.
If you already are a holder of Roberts Radio CR9916, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roberts Radio CR9916.
However, one of the most important roles played by the user manual is to help in solving problems with Roberts Radio CR9916. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roberts Radio CR9916 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
