Instruction/ maintenance manual of the product CD9925 Roberts Radio
Go to page of 24
CD9925 Stereo CD Radio Cassette Please read this manual before use ROBER TS Sound for Generations.
Important Information ......................................................... 1 Controls ........................................................................... 2-5 Battery Operation ..............................................................
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Controls 1. CD previous track button 2. CD next track button 3. CD mode button 4. Operation LED (Front) 24 35 6 7 9 1 0 5. Repeat indicator 6. CD display 7.
Controls (Top) 15 12. Volume control 13. Deep bass boost button 14. Function switch 15. Telescopic aerial 16. FM stereo indicator 17. Tuning dial 18. Waveband switch 19 12 25 24 23 22 21 20 18 19. CD lid 20. Record button 21. Play button 22. Rewind button 23.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Controls (Right side) 26 28 26. Tuning control 27. Beat cut and FM mono/stereo switch (on rear) 28.
Controls (Left side) 29 30 29. Mains socket (on rear) 30. Headphone socket 5.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Battery operation 1. Remove the Battery cover on the rear of your CD radio cassette by pushing the catches in the direction of the arrows. 2. Insert eight LR14 (C size) batteries into the spaces in the compart- ment.
Listening to the radio - FM 1. Set the Function switch to the 'Radio' position. The Operation indicator will light up. 2. Select 'FM' using the Waveband switch . 3. Adjust the Volume control until a hissing sound is heard. 4. The Telescopic aerial which is only operational on FM, should be fully extended.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Listening to the radio - Medium and Long wave 1. Set the Function switch to the 'Radio' position. The Operation indicator will light up. 2. Select 'MW' or 'LW' using the Waveband switch .
Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up. To remove dust and dirt, breathe on the CD and wipe it with a soft, lint- free cloth in a straight line from the centre towards the edge.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Playing a CD 1. Press the Play/Pause button to start playback. The Play/Pause indicator will light up and the display shows the track number. 2. Set the Volume and Deep bass boost controls to the required settings.
Playback modes The Mode button allows you to select different CD playback modes in the following order:- REPEAT1 REPEAT ALL RANDOM NORMAL These modes can only be selected or changed during CD playback. 1. Whilst the CD is playing press the Mode button once to repeat the current track.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Programmed play By programming the player you can play up to 21 tracks in any desired order. 1. Whilst the CD is in STOP, press the Mode button . The Programme indicator will start to flash and the display will show ‘01’.
Adding tracks to a programme 1. Whilst the CD is in STOP, press the Mode button repeatedly until the display shows the first empty memory location (the largest number) 2. You can now add tracks (maximum 21) to the sequence as described earlier. Replacing previously programmed tracks 1.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Listening to cassette tapes 1. Set the Function switch to the 'Tape' position. 2. Press the Stop eject button to open the Cassette compartment .
Recording from the Radio 1. Set the Function switch to the 'Radio' position. 2. Tune in to the desired station. 3. Adjust the Volume control to suit your requirements. 4. Insert a blank cassette with the tape surface uppermost and the side you wish to record on facing towards you.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Recording from CD 1. Set the Function switch to the 'CD' position. 2. Insert a CD into the compartment. 3. Insert a blank cassette with the tape surface uppermost and the side you wish to record on facing towards you.
Preventing accidental erasure 1. To safeguard your recordings against accidental erasure, break off the appropriate tab on the cassette as shown . 2. There is one tab for each side of the cassette. This will prevent the Record button from being pressed.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 18 Headphone socket A 3.5mm Headphone Socket located on the left side of you CD radio cassette is provided for use with either headphones or an earpiece. Inserting a plug into the socket automatically mutes the internal loud- speaker.
19 General Do not allow this unit to be exposed to water or steam. It is recommended that the FM band be used wherever possible as better results in terms of quality and freedom from interference will usually be obtained than on the MW or LW bands. Mains supply The CD9925 will operate from a supply of AC 230volts, 50Hz only.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Specifications Power Requirements Mains AC 230 volts, 50Hz only Batteries 8 x LR14 (C size) Frequency Coverage FM 87.5-108MHz M W 522- 1620kHz L W 144- 281kHz Circuit Features Loudspeaker 2 x 77mm 8ohms Output Power 2 x 1.
Notes: 21.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below.
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1.
An important point after buying a device Roberts Radio CD9925 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roberts Radio CD9925 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roberts Radio CD9925 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roberts Radio CD9925 you will learn all the available features of the product, as well as information on its operation. The information that you get Roberts Radio CD9925 will certainly help you make a decision on the purchase.
If you already are a holder of Roberts Radio CD9925, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roberts Radio CD9925.
However, one of the most important roles played by the user manual is to help in solving problems with Roberts Radio CD9925. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roberts Radio CD9925 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
