Instruction/ maintenance manual of the product R9966 Roberts
Go to page of 12
Please read this manual before use ROBER TS Sound for Generations R9966 3 Band Mains/Battery Rugged Radio.
1 Contents Important Information .......................................................................................................... ..................................................... 1 Controls ..............................................
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 2 Controls 1. Light 2. Volume control 3. Tuning dial 4.
3 Controls 8. Headphone socket 9. Auxiliary socket 10. Microphone socket 11. Battery compartment 12. Mains lead storage compartment 8 9 12 10 (Rear) (Right side) 11.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 4 Mains operation Only for use in dry conditions. If using your radio outside in damp or rainy conditions the internal battery supply should be used. 1. Place your radio on a flat surface.
Operating your radio FM 1. Fit the FM antenna into its mounting point (top right of your radio) By rotating the antenna clockwise until it is 'hand tight'. Do not over tighten 2. Set the Waveband switch to the FM position. 3. Adjust the Volume control until a hissing sound is heard.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Operating your radio Medium and Longwave 1. Set the Waveband switch to the MW or LW position. 2. Adjust the Volume control until a hissing sound is heard.
7 Mic, Aux and Headphone sockets 1. The Mic socket (6.35mm) on the right side of your radio allows a microphone to be connected to your radios amplifier. Inserting a plug into the socket automatically mutes the internal radio signal. 2. The Aux socket (3.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 8 External DC in socket 1. If a 230V mains supply is not available your radio may be powered by 12 Volts DC via the External DC in socket located on the left side of your radio.
9 The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L or coloured RED. Mains supply Important The AC mains lead should only be used in dry conditions .
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 10 Specifications Power Requirements Mains AC 230 volts, 50Hz only D C 12V DC @ 1Amp centre pin positive Frequency Coverage F M 87.
ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below.
An important point after buying a device Roberts R9966 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roberts R9966 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roberts R9966 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roberts R9966 you will learn all the available features of the product, as well as information on its operation. The information that you get Roberts R9966 will certainly help you make a decision on the purchase.
If you already are a holder of Roberts R9966, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roberts R9966.
However, one of the most important roles played by the user manual is to help in solving problems with Roberts R9966. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roberts R9966 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
