Instruction/ maintenance manual of the product GPMG8010 ritetemp
Go to page of 2
50 60 70 80 90 PG 1 PG 2 Statement of use: The GPMG8010 can be used with most 24 volt gas, oil or electric heating systems, zoned heating systems, heat pumps with or without auxiliary heat, or gas millivolt heating systems. It cannot be used with 120 volt heating systems.
50 60 70 80 90 PG 3 4 Heat Pump EMER Switch Gas/ Electric jumper EMER latch Circuit Board NOTE: If you have a HEAT PUMP with auxiliary heat this section applies to your system. If your Heat Pump malfunctions or cannot maintain your desired temperature you may occasionally need to access the EMER position on the mode switch.
An important point after buying a device ritetemp GPMG8010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ritetemp GPMG8010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ritetemp GPMG8010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ritetemp GPMG8010 you will learn all the available features of the product, as well as information on its operation. The information that you get ritetemp GPMG8010 will certainly help you make a decision on the purchase.
If you already are a holder of ritetemp GPMG8010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ritetemp GPMG8010.
However, one of the most important roles played by the user manual is to help in solving problems with ritetemp GPMG8010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ritetemp GPMG8010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
